2008 Jeep Wrangler Jeep Hardware

Features:

Prepare meals on the trail with this slide-out camp kitchen for your Jeep Wrangler. Modular system holds a portable fridge and includes countertop with a storage compartment. Trays are easy to open and lock in place while stored to prevent movement.

Features:

Upgrade the factory hinges on your Jeep with these heavy-duty tailgate hinges. Built to last, these hinges provide additional support for MORryde tailgate accessories. Grease zerk on each hinge helps keep the tailgate operating smoothly.

Features:

This fold-out countertop adds more space to prepare meals on the trail. Hinged design makes it easy to set up and store. HDPE material resists moisture and odors. Works with MORryde camp kitchen with storage compartment (MR83MR - sold separately).

Features:

This MOLLE panel lets you attach extra gear, RotopaX water containers, or kitchen utensils to your MORryde camping kitchen. Doubles as a side wall to help keep your portable fridge from tipping over when you are off-road. Rugged steel construction.

Features:

This compact countertop adds more space to prepare meals on the trail. Clip-on design makes it easy to set up. HDPE material resists moisture and odors. Works with both styles of MORryde camping kitchens (MR83MR and MR73QR - sold separately).

Features:

Cook meals on the trail with this slide-out camp kitchen for your Jeep Wrangler. Modular system supports a portable fridge and a 2-burner propane stove. Nesting trays are easy to open and lock in place while stored to prevent movement during travel.

Features:

This jerry can mount lets you carry fuel so you can fill up when you're off the beaten path. Works with 5 gallon NATO-style or Scepter fuel cans. Also compatible with a RotopaX fuel mounting panel. Installs behind the driver's-side fender.

Features:

This RotopaX mount lets you carry fuel, water, and more when you're off the beaten path. Provides a mounting area for RotopaX brackets. Installs behind the passenger's-side fender.

Features:

Have a table available instantly with this drop-down table with extension. Install on your rear swing open tailgate and unlatch to provide a metal shelf and pull out table. Custom fit for your vehicle. Drilling required.

Installation Notes:

Drilling required for installation

Features:

Bring the convenience of your kitchen sink to the trail with this camping sink and faucet. Included pump provides water from an on-board source. Easily folds into the storage compartment on your MORryde camp kitchen (MR83MR - sold separately).

Features:

This RotopaX mount lets you carry fuel, water, and more when you're off the beaten path. Provides a mounting area for RotopaX brackets. Installs on MORryde heavy duty tailgate hinges for Jeep Wrangler JK and JKU (sold separately).

Features:

Replace the old or broken tailgate bar on your vehicle with this sturdy powder coated steel bar.

Features:

Bring the convenience of your kitchen sink to the trail with this camping sink. Easily fits into cutout on countertop and collapses for storage. Easily folds into the storage compartment on your MORryde camp kitchen (MR83MR - sold separately).

Features:

This jerry can mount lets you carry fuel so you can fill up when you're off the beaten path. Works with 5 gallon NATO-style or Scepter fuel cans. Installs on your factory or MORryde spare tire carrier.

Features:

This jerry can mount lets you carry fuel so you can fill up when you're off the beaten path. Works with 5 gallon NATO-style or Scepter fuel cans. Also compatible with a RotopaX fuel mounting panel. Installs behind the passenger's-side fender.

Features:

This RotopaX mount lets you carry fuel, water, and more when you're off the beaten path. Provides a mounting area for RotopaX brackets. Installs behind the driver's-side fender.

Features:

Change the look of your vehicle by upgrading some of its hardware. This kit lets you replace your factory hood catches with rugged new ones that lock for increased security. Black powder coated steel is stylish, durable, and corrosion resistant.

Features:

This heavy-duty gas strut makes it easy to swing your Jeep's rear door open. Built-in stabilizer locks in place to keep tailgate open so you can easily access your cargo. Set the lock to engage automatically or manually, depending on preference.

Features:

Change the look of your vehicle by upgrading some of its hardware. These replacement door hinges are made of durable, corrosion-resistant powder coated steel with a black finish for rugged style. Two pairs of hinges included.

Tech Tip:

Product intended for vehicles with half or full steel doors

Features:

This kit lets you replace your vehicle's factory soft top hardware. It includes the BeltRail attachment system, header, quick-release bow knuckles, bow-mount adjustment plates, top arch bar, door surrounds and a tailgate bar.

Tech Tip:

Hardware is designed like 2010 and newer OEM hardware for use with factory soft tops or Supertop NX. However, hardware will fit any 2007 and newer vehicle.

Features:

One pull on the spring handle of Bestop's Quick Release Bow Knuckles makes it easy to adjust, remove or attach your soft top. Spring pin replaces factory-original, screw-on knuckles to fit over existing bow mount hardware.

Features:

Replace your old or damaged factory windshield channel with this new one so that you can attach a factory or Rampage soft top to your Jeep. No drilling required.

Features:

Change the look of your vehicle by upgrading some of its hardware. This kit lets you replace your factory hood catches with shiny new ones. Polished stainless steel is stylish, durable, and rustproof.

Features:

Replace your factory door surrounds with this set that is compatible with vehicle OEM soft tops and Bestop Replace-A-Top, Supertop NX and Trektop NX. Includes driver's- and passenger's-side door surrounds, 4 adjustment knobs and tailgate bar.

Tech Tip:

Door Surround is designed to work with 2010 and newer factory cable soft tops or Supertop NX and Trektop NX. They will not work with 2007-2009 factory cable tops.

Features:

Replace your factory door surrounds with this set that is compatible with vehicle OEM soft tops and Bestop Replace-A-Top, Supertop NX and Trektop NX. Includes driver's- and passenger's-side door surrounds, 4 adjustment knobs and tailgate bar.

Tech Tip:

Door Surround is designed to work with 2010 and newer factory cable soft tops or Supertop NX and Trektop NX. They will not work with 2007-2009 factory cable tops.

Features:

Replaces the factory door surrounds on your Jeep and provides attachment points for a soft top.

Features:

Securely transport your ammo to the range with this durable tray. Supports most common ammo can sizes. Universal design lets you bolt this carrier to any area of your Jeep with matching bolt patterns for a RotopaX mount or jerry can tray.

Features:

This kit replaces an old or worn tailgate bar on your vehicle's Bestop fabric soft top. Included hook and loop fastener strip allows you to attach the rear window of your Trektop soft top B56804 or B56805 to the tailgate bar.

Features:

Mount your high lift jack to the back of your Jeep with this sturdy kit. Brackets attach to the door hinges of your vehicle's tailgate with the included hardware. Jack secures in place with easy-to-use, screw-on knob.