Videos
for Toyota Highlander Owners
Help Articles
for Toyota Highlander Owners
Expert Answers
for Toyota Highlander Owners
There sure is! You'll be needing the Lockout Key #DX94FR for your Brake Actuator #T4606520. Do you use the key much? Or are you using the electric solenoid?
view full answer...Hey Matt, thanks for bringing this to our attention. Yes the mounting hole dimensions of the Demco DA75 Trailer Brake Actuator for Drum Brakes #DM33CV that you referenced are separated by 3 inches horizontally and 2.5 inches vertically. Do you have a…
view full answer...The Dexter DX7.5L A-60 Brake Actuator part #DX89FR for disc or part #DX33FR for drum will work to replace both a UFP A-60 or A-75 Brake Actuator so there will be no worried here. The A-60 is rated for 6K and the A-75 is rated for 7.5K. The Dexter…
view full answer...Great question, Hannah, and welcome to the world of boating and trailering! Since the Demco Disc Brake Actuator #DM33CV does have an electric lockout, you'll be all set. It just has a solenoid with 2 wires that get wired up to a reverse circuit…
view full answer...You can, Ted! The Demco DA75 Trailer Brake Actuator - Zinc - Disc #DM33CV actually has a built-in lockout solenoid so that you can reverse properly. It just has 2 wire that get ran to the reverse circuit of your vehicle. What are you planning to…
view full answer...That is a tough question to answer as both are excellent manufacturers with their respective pros/cons. In regards to brake actuators, they both make and manufacture them here in the U.S.A. and they both come with a one year warranty. In regards to…
view full answer...Dan, you’ll want to use 1/2" x 4-1/2" Grade-5 or higher for a secure mount. They aren't included, but you can find them at any hardware store. The mounting holes on the Demco DA75 Brake Actuator #DM33CV are standard size for bolt-on…
view full answer...Hi David; more often than not it is related to the cost, so in this case what Dexter is charging as the manufacturer. This isn't the first time the complete part is cheaper than a replacement so I recommend doing what you said and buying the…
view full answer...Yes we do. The calipers and brackets for the Kodiak Disc Brake Kit item #K2R35D can be purchased separately. The caliper is item #KDBC225DAC and the brackets are item #KCMB10RD. I have linked a diagram of the bracket for the Kodiak Disc Brake Kit…
view full answer...Hey there Lorna. Yes, the Demco Drum Brake Actuator #DM28CV or Demco Brake Actuator Disc #DM33CV will 100% fit your 3" wide 4" tall trailer tongue. Even though the actuator says 3" wide and 2-1/2" tall, it will work because it…
view full answer...There is not a rebuild kit so you would need to replace your UFP A-60/A-75 disc brake actuator, with the correct one depending on if you have a 3" x 5" or 3" x 4" straight tongue: - 3" x 5" Straight Tongue: Dexter DX7.5L…
view full answer...Jeremy, you’re spot on. The new Demco DA75 #DM33CV is a great fit for that setup; it’s designed for a 3 inch channel tongue, uses a 2 inch ball, and is rated for up to 7,500 lbs GTW. Plus, its zinc finish holds up really well in freshwater and…
view full answer...




























