Custom Fit 2005 Chevrolet Suburban Accessories

Both! I checked with Buyer's Products and their Class 4 Service Body Long Hitch item #3371801055 can either be welded on or bolted on with the included hardware. This is a universal hitch so you'll need to drill into your trucks frame if you…

Since your 2012 Ford E-350 has a service body your best option for a hitch is with a weld-on unit like the Buyers Products Class 5 #3371801050L. This particular unit includes the necessary mounting plates and has more than enough capacity for…

Sounds like you are looking for a hitch mounted cargo carrier to mount in a front hitch for your truck. The most popular cargo carrier we have is the etrailer #e98874 which will fit a 2 inch hitch and can fold up when not needed. Being able to fold…

I have two options that will allow for you to securely attach a cooler to your Curt Cargo Carrier part #C18151. You can choose from either a cargo net or a set of cambuckle ratchet straps. A cargo net such as the Curt Stretchable Cargo Net part…

Drilling a hole in your hitch receiver will void your manufacturer's warranty if something were ever to go wrong with it. For that reason, I think the best solution to use an anti-rattle hitch pin that won't require any drilling, like the…

I spoke with my contact at Super Springs and the SumoSprings Custom Helper Springs, #SSR-204-40, will fit on your 2003 GMC Yukon XL with coil springs as long as it is a 1500 model. These springs are designed to replace your factory bump stops. Once…

I have great news for you. There is a simple plug in adapter that you can use that will fit the Voyager brake controller on one end and a port on the vehicle on the other end. It is #3015-P. I have included a link to a video showing a typical…

The stock bump stops on your 2005 GMC Yukon XL should be located outside of the coil springs so they would not interfere with the AirLift system you installed. You could add some different rubber springs such as #TGMRYS4 but since you already have…

We actually have a backup camera that you can plug in line with the 7-Way trailer connector. Take a look at #HM50002. I have linked a video showing an installation for you. As you can see, it will just plug in line with the 7-Way and retain all the…

The Redline 36 Inch Side-Door Bar Lock Assembly, #305736, can be used on the right and left side. The image on our product page shows it in the left hand orientation, but it can be used on the right hand side by flipping it upside down. Check out the…

Yes, the hasp - or keeper latch - is included with the 36" Lock Side-Door Bar Lock Assembly #305736. The only thing you will need to get separately are is the mounting hardware, which will be 5/16" carriage bolts and matching washers and…

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…