I sent all of this to my tech contact at LCI to see what they this is the problem and they were able to come up with a way to use the voltage readings to determine where the issue is: There are 4 wires on the harness as follows Black= power (need to…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
The 2020 Ford F150 and the 2016 model would both use the same Westin Grille Guard, but the #57-378PK is a mounting kit for a Westin HDX Grille Guard with Punch Plate for a 2015-2019 Silverado 2500 or 3500 and wouldn't fit your truck. If the 2016…
We have trailer hitches for your 2004 Ford Ranger that are designed to fit a full size spare tire, but unfortunately Draw-Tite does not provide a list of what size spare tires will and will not fit to determine if your P225/70-15 size spare tire will…
Since your trailer is very close to 5,000 lbs your total tongue weight is very likely to exceed the 600 lb capacity of the 6k weight distribution hitch, so what you need is the 8,000 lb hitch, and I recommend the Fastway e2 (which is made by…
The Timbren Trailer Suspension Enhancement System for Underslung Axles #T92MR is 5-1/4" tall. Timbren recommends The spring be in constant contact with the frame at all times. So ideally you will want exactly 5-1/4" from your axle tube to…
Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…
The The Original Custom Towing Mirror Slide-On Mirrors (Pair) Item #CTM2200A are a confirmed fit for all models of the 2004 Ford Ranger so you'll be good to go with these on your 2004 Ford Ranger Supercab XLT. These slip on mirrors provide…
For your 2004 Ford Ranger I recommend the Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side #CTM2200A. These custom-fit slide on towing mirrors have arms that tighten down with knobs to give you peace of mind knowing that your…
Thanks for the picture of the mirrors you have on your 2004 Ford Ranger. From that I can tell that the The Original Custom Towing Mirror Slide-On Mirrors #CTM2200A that you referenced are a confirmed fit and will work well.
You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…
It is difficult to identify what hitch fits just by looking at the holes in the frame. However, I can tell you that the Curt Trailer Hitch Receiver #13138 is confirmed to fit your 2004 Ford Ranger Edge. This is a Class III hitch with a 2"…
