Videos
for Ford Excursion Owners
Help Articles
for Ford Excursion Owners
Expert Answers
for Ford Excursion Owners
You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…
view full answer...I don't see any issue with installing an axle flip kit on a drop axle aside from the shape of the axle as we only offer kits for rounds axle, the Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00 or part #K71-385-00.
view full answer...Hello Ken. I am not sure exactly how long your current U-bolts are, but you will probably be able to re use them. It just depends on how long they are and how much thread is left. Assuming your 4 leaf spring has 3/8" thick leaves it would be…
view full answer...The dimensions I'm seeing for a Suburban SW6DEL show it being 12.69"h x 12.69"w x 19.19"d so the Furrion RV Tankless Water Heater #FR98SR would most likely match up perfectly or require you to trim the opening by 1/8". The…
view full answer...Hello Kyle. I am very sorry but we do not have a Class V hitch for the 2003 Ford Excursion. We do however have a Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" #C14011 which is a custom fit to your Excursion. This hitch will line up…
view full answer...The two systems you mentioned are basically the two best systems available for weight distribution. Either one will work great for you as long as it is properly rated for your setup and is properly installed/set up. Personally I like the Reese Strait…
view full answer...The 7-Pole Blade to 5-Pin Delphi Connector Wired Trailer Adapter with 2-Pin Backup Camera Plug - Coiled #OPT42ER measures 94-1/2" when it is stretched out.
view full answer...Yes, you can use the Air Lift Upgrade Kit #AL52300 with the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88132 on your 2002 Ford Excursion. You will not have any issues installing this the parts together. We do also have the Upgrade Kit…
view full answer...As I see you were looking at the Firestone #F2251 air bags for your I am assuming that is the kit you are looking for mounts for. Here is a list of the mounts but do understand these do not come with hardware. Replacement Upper Bracket #F2135825302…
view full answer...We have heard of this issue before on the Lippert Ground Control systems #LC358590. Here is the recommended procedure for clearing the error code: Extend all jacks at least 6 inches. Then press and hold the RETRACT button until the jacks begin…
view full answer...I went out to our warehouse to take a look at all of the Replacement Bail Clamps we currently have available for the Firestone Ride-Rite Air Helper Springs. For both the Replacement Bail Clamp #F3373 and #F3077, there is a distance between threaded…
view full answer...The correct replacement bail clamp for a Firestone air bag kit part #F2597 is the part #F3077.
view full answer...