iN-Command TPMS Sensor Pairing Manufacturer Demo

content loading

Customers compare NCTP100 to these similar products




Products Featured in this Video




iN-Command TPMS Sensor Pairing Manufacturer Demo


Recorded Instru.: There are three different methods for pairing your TPMS sensors to you're iN-Command TPMS app, the deflation method, the manual method, and the QR code method. Install the battery by first removing the cover from the TPMS sensor. Use the wrench included with your TPMS sensor kit to assist. Install the battery with a positive terminal facing upward. Then re-install the cover.Press start on the deflation sensor pairing page within the TPMS app. Select the tire on which you'll be installing the TPMS sensor.

Remove the cap from the tire's valve stem and install the TPMS sensor in its place. The air pressure from the tire will activate the sensor and its ID will appear on the app. Press confirm when the sensor's ID appears.Repeat this process for each remaining sensor and tire location. When finished pairing and configuring your TPMS sensors, press the check mark at the bottom of the screen to save your changes.Press start on the manual sensor pairing page within the TPMS app. Within the mobile app, select the tire on which you'll be installing the TPMS sensor.

Locate the sensor ID of the sensor you wish to pair and enter it into the mobile app. The ID can be found on top of the TPMS sensor. Press confirm.Repeat this process for each remaining sensor and tire location. Press the check Mark at the bottom of the screen to save your changes. Press start on the QR codes sensor pairing page within the TPMS app.

Select the tire on which you'll be installing the TPMS sensor.Using the camera on your mobile device, position the QR code on the TPMS sensor within the camera's view finder until it's automatically captured. Repeat this process for each remaining sensor entire location. When finished pairing and configuring your TPMS sensors, press the check mark at the bottom of the screen to save your changes.


Questions and Comments about this Video

What do you think?

* e-mail address format: [email protected]

I would like an email notification if someone replies to my comment

Info for these parts were:

Video Edited:
Jacob T
Video Edited:
Dustin K
Video by:
Chris R
Installed by:
Michael B
Installed by:
Adam E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.