Review of Performance Tool Electrical Tools - Circuit Tester - PT72PJ Video

Hey Tyler, thanks for the information and welcome back. To add wiring to your school bus you'll need to install the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector item #C59236. This kit includes the powered converter, a…

You're welcome! Thanks for all of the information! You could go with the Blue Ox item #BX1139 but I've got a different recommendation that will save you some money and get you a better setup. The Curt RVi battery charger is definitely the way…

The install instructions for the Upgraded Circuit Protected Tail Light Converter Hardwire Kit part #119178KIT or part #119178 are attached to this page for you. The instructions are the same for both models, the former simply comes with a circuit…

The blinker/brake lights are carried on one circuit and the running lights are on a totally different one. Since the stop/turn circuits seem to work on the left side but the running lights on that side do not you need to check the wiring of the…

The easiest way to get a 12 volt power wire test wiring is to use a jumper wire from a 12 volt battery. One for the positive terminal and the other for the ground. We have 10 gauge wire like part #10-1-1 sold by the foot which would work well.

To replace your 7 blade plug, the colors of wire will vary sometimes even within the same model year vehicle. We will have to match function to function. I recommend using a circuit tester, like the Quickee Circuit Tester #PTW2993, to test the…

Hey Erick, yes the EcoHitch front hitch part #EH39CR that you referenced does fit your 2026 Ford F-250 with the Tremor package.

Yes, the Replacement Trailer Hub Bearing, #25580, is the replacement for the Airstream trailer bearing 4T-25580. It has an inner diameter of 1.750 inches and has the same outer diameter as well. If the (back)INNER bearing is the 4T-25580, then there…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

Since I do not know the details about your RV wiring what I suggest you do is test the wiring connector on the RV to see if the lighting signals are making it that far. This will at least tell you if the issue is on the RV or in the towed Jeep…

I'd be happy to help! To figure out if new modern brakes will work on your vintage Airstream you'll need to figure out which size your brakes are. Based on your picture it looks like you have a 5 bolt mounting flange similar to what #AKEBRK-6…

The four wires on trailer brake controllers are standardized so they always connect in the same way. The black wire connects to the battery positive terminal (through a circuit breaker) to deliver operating power to the controller; the white wire is…