Optronics RV Lighting - Utility Light - ILL72CB Review

content loading



Customers compare ILL72CB to these similar products




Products Featured in this Video



Review of Optronics Trailer Lights ILL72CB


Today we're going to be taking a look at part #ILL72CB. This is the Thin Line Opti-Brite LED Interior Strip Light from Optronics. It's going to feature a low profile design, and a low heat LED strip that's going to provide brilliant light for your RV's interior. It's going to feature long-lasting LEDs. These are also great replacements for incandescent lights. The LED system is going to be more efficient which means it's going to provide brighter light with less power draw. You don't have to worry about replacing bulbs, you don't have to worry about the brittle filaments, and it's got multiple diode design, which is going to optimize your light output. It's going to feature a clear polycarbonate housing.

It's going to allow a lot of light to come through. It's going to distribute the light evenly when it comes to the light output. It's also got a white polycarbonate housing here on the ends that is impact-resistant. Here on the back side you're going to notice a 2-wire design. The black wire is going to be the lead wire for power, the white wire is going to be our ground wire. This is for 12 volt DC systems. Taking a look at the overall length, if we measure from end to end, that's going to give us a measurement of 21 7/8ths of an inch.

If we measure the overall width, that's going to measure about 1 inch. Then the thickness of the light itself is going to be about 5/8ths of an inch. The interior strip light length is going to measure right at 21 inches. Here on the back side you're going to have a small mounting hole on this side, and a small mounting hole on this side. The whole diameter of the mounting holes is going to be 5/32nds of an inch, and then from the center one hole to the center of the other is going to measure right on 21 9/32nds of an inch.

Again, that is center on center. The LED light bar is going to contain 27 diodes, and that's just 27 LEDs. What I want to do is I want to go ahead and hook it up to our external power source. That way you can see what it looks like with power running to it. We'll also turn off our overhead lights; that way you can get a better feel for how it really looks in low-light conditions. .. You can see here it sends out a nice, consistent LED signal. The clear lens allows a lot of that light to come through.

Again it's got even light distribution. You can see there that we have all 27 diodes functioning perfectly, and the LED system has a really quick response time from the time that the light is turned on to the time that it actually appears here on our light bar. THat's going to do it for today's review of part #ILL72CB. This is a Thin Line Opti-Brite LED Interior Strip Light from Optronics. .


Questions and Comments about this Video

add comment

Info for this part was:

Written by:
Lindsey S
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.