Does Correct Track Lift Kit MORryde X-Factor Brace Work Well
Updated 10/30/2025 | Published 02/20/2025 >
Question:
Im thinking about getting the correct track trailer alignment and lifting my trailer 2. Also, want to get the Moryde x factor braces for stability. I know I need the adapters to the braces with the correct track kit, but I cant see how the brace adapters give ANY support. They dont attach to the spring eye bolt. The 3 bolts shown in the pictures going around the spring hangers arent enough. The x-factor kit WITHOUT the adapters attach to the spring eye bolt, which looks like a lot of support. My question is: how much support do the x-factor braces give when using the correct track adapters? Thanks, Steve
asked by: Steve H
Expert Reply:
Hey Steve, you are correct in that you would need the part # MR93WR to use the X-Factor with a Correct Track lift kit. While it may not attach to the spring eye bolt it still attaches to the hangers which does provide additional cross bracing for the trailer chassis. It's not so much about supporting the suspension with additional bracing as it is about bracing the trailer chassis which this still does allow for.
Product Page this Question was Asked From
MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers
- Accessories and Parts
- Trailer Suspension Parts
- Crossmember
- Adapters
- MORryde
more information >
Continue Researching
- Search Results: trailer suspension parts
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Search Results: morryde xfactor
- Video: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers Feature Review
- Shop: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers
- Search Results: trailer leaf springs
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Video: MORryde X-Factor Crossmember Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2014 Jayco Pinnacle Fifth Wheel
- Video: Setting Up Your MORryde Standard Frame Hanger X-Factor Crossmember - 2018 Grand Design Reflection Fi
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: RV Exterior Lighting
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Article: Double-Eye Trailer Suspension System Review
- Search Results: dx74xr
- Search Results: uo12~029
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Suspension Enhancement
- Search Results: slide ski
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Article: How to Raise Your Travel Trailer Height
- Search Results: sumospring
- Q&A: How to Determine Correct Replacement Leaf Springs for 7,000 lb Axle
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Q&A: How Far Apart Do the Spring Hangers Have to Be for the MORryde X-Factor Crossmember To Fit?
- Q&A: Purpose of Flat Plate with 3 Holes from MORryde X-Factor Crossmember Adapter Kit
- Article: My Trailer Hitch Doesn't Fit
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs


Jameson C.
10/30/2025
Hey Steve, how did things turn out after adding the X-Factor braces with the Correct Track adapters? It’d be great to hear if the added cross bracing gave your trailer the stability you were hoping for. Your update could make it easier for others looking at the same setup.