Erickson E Track - E-Track Cargo Organizers - 59149 Review

content loading

Customers compare 59149 to these similar products

Products Featured in this Video

Review of Erickson Trailer Cargo Control 59149

Today we're going to be taking a look at a E Track wood beam socket for standard 2-inch lumber. This bracket let's you attach a standard 2-inch board to an E Track anchor on your trailer. It allows you to build shelving, beds, dividers, and cargo restraints very quickly and easily. It's also easily adjustable which is one of the greatest features about the unit. It's got the spring-loaded clip right here, that way you can always adjust the height up and down on your E Track system. You can move this to any mounting location on your E Track system.

There's numerous holes in the bracket that allow you to secure the lumber to the socket or to the bracket. Hardware to do that is sold separately. You can use this with horizontal, vertical, and single E Track systems. Steel construction is very strong and durable, and it's going to have that yellow zinc coating or finish on it to do a great job at resisting rust and corrosion. You are going to get 1 wood beam socket. A few measurements to go over with you real quick.

If we take a measurement from inside edge to inside edge, that's going to give us a measurement of about 1 11/16 of an inch. The diameter of all the mounting holes on the unit are going to measure 1/4 of an inch. The elongated one measures 1/4 inch up and down and then front to back it's going to give us a length measurement of about 3/4 of an inch. The mount hole separation on center between these two bottom ones, those are separated on center by about 1 1/4 inch. Then this hole, and this hole, are separated in height by 1 inch.

If we take a measurement of the depth that we have, so from the bottom to the top, that's going to give us a measurement of 2 3/4 of an inch. From this back edge to the furthest out point, that's going to give us a measurement of 3 3/8 of an inch. Then we can measure from this back piece right here to the very front of the unit, that's going to tell us about how far it's going to stick out from the wall, well from the E Track mounting area. That's going to be about 3 3/4 of an inch. That's going to do it for today's look at the E Track wood beam socket for standard 2-inch lumber.

Questions and Comments about this Video

Info for this part was:

Video Edited:
Zack K
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.