Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes Review Video

What I think you are asking is, how to set-up the hitch with the Rhino Box as the narrow width of the pin box does not engage the capture plates on your Demco Hijacker 5th Wheel hitch. What you are missing is the Demco Hijacker Autoslide Locking…

I spoke to Demco about the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes part #DM76FR, the side plates are supposed to be angled as that's what provides the clamping force. I would just make sure you have the bolts torqued fully to…

To verify the Demco Autoslide 5th Wheel Hitch #DM8550024 will work correctly with your 2023 Forest River Salem Hemisphere 36FL I need to know what pin box you have. Some pin boxes like the Lippert Rhino will require a Locking Plate #DM76FR. That and…

Yes, Demco does have the 21K Autoslide #DM89GV as well as an 18K Autoslide #DM69GV that will fit the factory prep/puck system in a Ram 2500 or 3500 pickup. If you have one of the following pin boxes you will also need the corresponding accessory to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

To me that looks like one of the urethane bumpers #DM15469, so you'll want to replace that first. This was most likely caused by wear and tear as the clunking I believe to be related to your capture plate needing to be adjusted. What you're…

The grease fitting that is on top of the head unit on your Reese 5th Wheel Trailer Hitch, #RP30084, is used to lubricate the pivot points of the jaws. Using a lithium grease, #L11354, is acceptable. You will also want to lubricate the jaw itself, and…

I recommend the Demco Hijacker Autoslide 5th Wheel Hitch #DM8550024 for your 2022 Ford F-250. This hitch will drop into the factory prep/puck system and the auto sliding 5th wheel hitch will keep you from having to get out of your truck to reposition…

Yes, you need the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes part #DM76FR in order to hookup a trailer with Rhino pin box to the Demco Autoslide 5th Wheel Hitch.

The pin weight of a 5th wheel trailer will usually be around 20% of the trailer's gross trailer weight (GTW) rating. The only real way to find the loaded pin weight of your 5th wheel trailer would require access to a commercial scale used to…

Since your 5th wheel trailer has the new 21k Lippert Rhino Pin box you will need to use the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes #DM76FR for the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw -…

In regards to a Demco Autoslide 5th Wheel Trailer Hitch like part #DM8550034, there are not adjustments for the locking jaw mechanism. If there is too much slop inside the jaws with the kingpin they are either too far worn or damaged and need…