Trunk Bike Racks Specs:
Features:
...Trunk bike rack carries 2 bikes using the rear of your vehicle Easy-to-use Fit Dial system adjusts rack base to fit your vehicle Installs with 6 attachment straps Dual support arms provide...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Caution: Rear wiper can not be used when carrier is mounted
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack carries 2 bikes on the back of your sedan, hatchback, or van Not compatible with most spoilers Anti-sway cradles with ratcheting straps hold bike frames at 3 points...
Installation Notes:
Do not open trunk while rack is installed
Do not use rear wiper when rack is installed
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack lets you carry up to 2 bikes on the back of your vehicle StableCradle anti-sway cradles with ChainStraps hold bike frame at 3 points Prevent sway and bike-to-bike contact...
Installation Notes:
More Information >Trunk Bike Racks Specs:
Features:
...Capacity: 3 bikes Weight capacity (total): 105 lbs Weight capacity (per bike): 35 lbs Carrier weight: 10.8 lbs Distance from center of arm to center of arm: 14" Lifetime warranty Note: This dual-...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Caution: Rear wiper can not be used when carrier is mounted
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 2 bikes on your vehicle's trunk 2 Padded arms with cradle indentions and padded straps secure bikes by the frame Adjust independently to keep bikes
Installation Notes: Place top clips in the gap at the front edge of the top of the trunk, hatch or door Place lower clips in the bottom edge of trunk or hatch. Caution: Rear wiper can not be used when carrier is mounted Lower arm of carrier should be positioned on upper tier of bumper.
Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 3 bikes on your vehicle's trunk Fits over most types of spoilers 2 Arms with padded, anti-sway cradles and rubber straps secure bikes by the fra...
More Information >Trunk Bike Racks Specs:
Features:
...Specs: Carrying capacity: 3 bikes Weight capacity: 90 lbs Single-bike weight capacity: 35 lbs Distance between arms (outside cradle to outside cradle): 12-1/2" Carrier weight: 16.5 lbs Lim...
Installation Notes:
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack lets you carry up to 2 bicycles on the back of your vehicle Arched body fits over many types of spoilers HideAway anti-sway cradles with ratcheting straps hold bikes at 3
Installation Notes: Place top clips in the gap at the front edge of the top of the trunk, hatch or door Place lower clips in the bottom edge of trunk or hatch. Caution: Rear wiper can not be used when carrier is mounted Lower arm of carrier should be positioned on upper tier of bumper.
Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack carries up to 3 bikes on the back of your vehicle Sturdy cradles with soft rubber straps secure bikes to rack Rotate to better fit bikes of varying sizes Slide along arms...
Installation Notes:
Use the tow loops on the side of the vehicle to attach straps or hooks.
Vehicle has a soft bumper. The weight of bicycles may exceed the capacity of your bumper.
For proper installation, the lower pads should be located on the license plate of your vehicle.
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack carries 3 bikes on the back of your sedan, hatchback, or van Not compatible with most spoilers Anti-sway cradles with ratcheting straps hold bike frames at 3 points...
Installation Notes:
Do not open trunk while rack is installed
Do not use rear wiper when rack is installed
More Information >Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 2 bikes on your vehicle's trunk Fits over most types of spoilers 2 Arms with padded cradles and rubber straps secure bikes by the frame 2 Quick-rel...
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack lets you carry up to 3 bicycles on the back of your vehicle Arched body fits over many types of spoilers HideAway anti-sway cradles with ratcheting straps hold bikes at 3
Installation Notes: Place top clips in the gap at the front edge of the top of the trunk, hatch or door Place lower clips in the bottom edge of trunk or hatch. Caution: Rear wiper can not be used when carrier is mounted Lower arm of carrier should be positioned on upper tier of bumper.
Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 3 bikes on your vehicle's trunk Arched body fits over most types of spoilers 2 Padded arms with cradle indentions and padded straps secure bikes
Installation Notes: Place top clips in the gap at the front edge of the top of the trunk, hatch or door Place lower clips in the bottom edge of trunk or hatch. Caution: Rear wiper can not be used when carrier is mounted Lower arm of carrier should be positioned on upper tier of bumper.
Trunk Bike Racks Specs:
Features:
This trunk-mounted, 3-bike carrier has a versatile mounting system to fit most vehicle trunks and hatches. The rack includes fixed dual arms that offer excellent bike support and soft rubber anti-sway cradles to protect your bikes during transport.
More Information >Trunk Bike Racks Specs:
Features:
...in the USA Specs: Carrying capacity: 3 bicycles Weight capacity: 35 lbs per bike Distance between bikes: 6-1/2" Carrier weight: 11 lbs Limited lifetime warranty Note: This dual-arm rack reduces the ...
Installation Notes:
Do not open trunk while rack is installed
Do not use rear wiper when rack is installed
Upper strap should be placed over the leg
More Information >Trunk Bike Racks Specs:
Features:
...Specs: Carrying capacity: 2 bikes Weight capacity (per bike): 33 lbs Maximum tire width: 3.0" Maximum wheelbase: 50" Wheel diameter: 29" Dimensions: 50" ta...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Caution: Rear wiper can not be used when carrier is mounted
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Videos
for Trunk Bike Racks
Help Articles
for Trunk Bike Racks
Expert Answers
for Trunk Bike Racks
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…
view full answer...It really just depends on what the wires are for. Most likely you have several ground wires among the 8 as well as a couple running light circuits in there as well. You just have to run all of the wires to the correct circuits. The 4-way wiring of…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...The Montague Paratrooper Highline part #HIGHLINE20 is a 20 speed bike with 27.5 inch wheels whereas the Montague Paratrooper Pro part #PROBLK16 is a 27 speed bike with 26 inch wheels and has a rack over the rear wheel. So they are pretty similar…
view full answer...The Dexter 072-078-00 is a 2,200 lb capacity leaf spring. You can use a higher capacity leaf spring, however it…
view full answer...Most of the time when a tow setup is porpoising with a weight distribution system all you have to do is add a bit more spring bar tension to minimize the porpoising. With an Equalizer system you would need to angle the spring bars down further to…
view full answer...