Select the correct transmission cooler by determining where there is enough space to mount it. The diagram on the left numbers the best three positions to mount the transmission cooler in order. Transmission coolers are more efficient when they receive maximum air flow. At Position 1, the transmission cooler is 100% efficient. Position 2, between the air conditioning condenser and radiator, is 75% efficient while Position 3, between the radiator and fan, is only 60% efficient. If positions 2 or 3 are used, a larger transmission cooler will be needed to compensate for the loss of cooling power. If this is the case, choose a transmission cooler that is one or two sizes larger.
Tech Tips: Transmission fluid cannot be over-cooled, but it is critical in extreme cold conditions to allow the vehicle to warm up before driving.
Transmission Coolers Specs:
Required Transmission Adapter Fitting:
2001 Chevrolet Suburban Hose Fitting - D13018Features:
...dimensions: 11" wide x 12" tall x 7/8" deep Distance between inlets: 10-1/4" Mounting dimensions: 10-1/2" tall by either 5-1/4" or 6-3/4" wide 1-Year warranty Note: The...
Tech Tip:
D13018 - 5/8" Inverted Flare Fittings required only if vehicle equipped with 5/8" hex on trans line.
More Information >Videos
for Transmission Coolers
Help Articles
for Transmission Coolers
Expert Answers
for Transmission Coolers
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...You can install a stack cooler in your vehicle. The Class ratings are there as a reference point to a hitch Class. For example if someone has a Class III hitch they can look at coolers, see a Class III and say, hey, I have a Class III hitch so this…
view full answer...Hey Lynn, we generally don't recommend running more than one set of suspension enhancement on a vehicle because the…
view full answer...Hey Sam, I would recommend the Derale transmission cooler part #D13504 with the radiator adapter part #D13035 for your 2008 GMC Yukon XL with the 5.3 liter. This is a larger cooler that is the efficient plate fin design that we know works great on…
view full answer...When comparing the Flex-a-lite Transmission Cooler #FLX400117 to the similar Derale Series 8000 Transmission Cooler #D13502, there are very few differences between them. Both have an aluminum construction, include all hardware needed, and are…
view full answer...The method we use to determine the correct line to install a transmission cooler on is pretty simple. You want to install the cooler on the return line. To determine which line is the return line you will want to start with your truck totally…
view full answer...In regards to your 2013 Chevrolet Silverado, if you will be removing the auxiliary transmission cooler then I recommend using the Derale Series 9000 Plate-Fin Transmission Cooler Kit part #D13614 to replace it. This cooler measures…
view full answer...In order to reduce the transmission fluid temperatures in your 2014 Chevy Silverado 1500, I recommend using a transmission cooler like the Derale Series 8000 Plate-Fin Transmission Cooler Kit part #D13504. Generally speaking, the best transmission…
view full answer...Equal-i-zer is a brand that makes weight distriubution systems. But just like with Kleenex and tissue, people use the term equalizer to mean any weight distribution hitch. The actual Equal-i-zer systems do have built in sway control so I would…
view full answer...For the 4L80E transmission that is in your 2002 Chevy 2500HD Silverado we have supplemental transmission coolers that would work great in conjunction with the factory cooler or as a stand alone cooler if you are looking to bypass the factory…
view full answer...The Derale Stacked Plate Transmission Cooler part #D51906 is one of the most efficient transmission coolers out there so this would be an excellent option that would work great. With that said…
view full answer...Filter Products (1)