2028 Jeep Gladiator Tool Box

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

Hey Mike, with truck bed tool boxes like the Deezee part #DZ8560WB the fit really just does come down to dimensions and if you compared the dimensions of this to what your truck bed has and this would fit it's going to work just fine. The overall…

Hey Tod, the two UWS boxes have different shapes and capacities. If you check out the attached pictures you can see the differences between the part #UWS08298 and #UWS01044 to get a better idea. The #UWS01044 has a slightly smaller capacity at 8.2…

Hi Aaron! The DeeZee Red Label 5th Wheel Tool Box - Wide, Utility Chest Style - Aluminum - 14.9 Cu Ft - Black #DZ8560WB weighs 66 pounds. I have a diagram with measurements attached as well. Figured you could probably use them. : ) Are you going to…

Hi Pete; since the DeeZee Red Label 5th Wheel Tool Box - Wide, Utility Chest Style #DZ8560WB is a wide model it does not come with a tool tray or have one available from DeeZee. They have the #DZTBTRAY1 but it is only designed for 20" wide…

The BAK Revolver X4s Hard Tonneau Cover, short bed #BAK99ZR or long bed #BAK49ZR, measures about 8" when rolled up. It doesn't roll up completely up to the front so it will probably hang over the bed about 9" or 10" so you'll…

Yes, the Mounting Hardware for UWS Truck Bed Chests #UWS08353 is compatible with the UWS 48" Standard Chest Toolbox #UWS01061 (TBC-48-BLK) and your 2022 Ford Super Duty with aluminum truck bed.

Thanks so much for the photo that was super helpful, and what the axle tag shows is that you have a #11 Dexter Torflex axle. We do have the correct lift kit for you, which is the following part: - Torflex Lift Kit - Tandem Axle #K71-724-02 This kit…

Hi Tharen! With the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7200 installed on your unloaded 2026 Chevy Silverado 3500 (congrats on the new truck!!!), it will make the ride harsher, unfortunately. Upper overload springs…

Hey John, thanks for the picture of your axle tag and welcome back! Based on the capacity of 3,800 lb that I see on the tag the correct lift kit would be the part #K71-707-02. Which Airstream do you have and are you trying to get better ground…

Hey Terry! The DeeZee Red Label Truck Bed Tool Box #DZ8546B has 0.056" thick aluminum. As long as you are in the contiguous USA you will get free shipping. This tool box is made in the USA. What kind of truck do you have?

The towing capacity of the 2003 Chevrolet Avalanche 1500 with 5.3L V8 and 4.10 rear axle is 8100-lbs. For a 7600-lb GVWR travel trailer the resulting 500-lb safety margin is adequate/low-ish. With a trailer that weighs substantially more than the tow…