2024 Jeep Gladiator Tool Box

Hey Steve, The B&W Patriot #BWRVK3255 you have would require base rails or a gooseneck hitch and an adapter in order to mount to the bed of the F-250. If you want to go with base rails then I recommend the B&W Custom Installation Kit w/ Base…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Probably not unless you want to cut that round hole into a 2-1/4" square. The Square A-Frame Jack w/ Footplate item #e74VV is designed for a-frame trailer's that have a square cut out not the standard 2-1/4" circular cut out which I am…

Not that one Scott, but I have one that will. The UWS Truck Bed Fender Well Toolbox item #UWS01624 is too tall at 23-1/4". To keep below your bedsides you'll need to use the DeeZee Specialty Series Passenger's-Side Wheel Well Tool Box…

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

I do recommend using two pairs of the Ultra-Fab Chock and Lock Wheel Stabilizers #UF21-001070 for your triple axle trailer. Doing so is going to give you the best amount of stability to limit the front-to-back rocking motion that will occur when you…

I recommend the UWS Truck Bed Toolbox w/ Pull Handles #UWS07646 to go with your Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A61409. It is low profile, 14-1/2" tall to allow you some extra space for hauling material, and is 20" wide…

Hey Josh, The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR6008 unfortunately won't fit your 2023 Chevy Silverado 1500 8' bed, and it doesn't look like Pace Edwards has an alternative option so we'll need to go with…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The exact length of the Access tonneau cover part #A73FR is not available as we have requested this from them before but they have told us that as long as the tool box in the bed of your 2020 GMC Sierra 1500 6-1/2 ft bed is between 19 and 21 inches…

The UWS Truck Bed Chest #UWS01047 doesn't come with any mounting hardware and doesn't actually have any holes predrilled into it for mounting so it would be a custom job to mount it. That being said you could just drill through the bottom of…

Hey Bill, the Flair-It High Pressure Hose #FL24FR that you referenced can be used with hot and cold water.