Filter By Toolbox Application
Vehicle Style: 6-1/2 Foot Bed - excluding Stepside Change
Truck Tool Box Specs:
Features:
48" Long x 12-3/4" wide x 11-1/8" tall. Side-mount-style tool box for out-of-the-way storage; steel construction; locking paddle handle; crowned lid with full-pan support - all at a reasonable price. Sits 5" above truck-bed rails.
More Information >Truck Tool Box Specs:
Features:
40-3/4" Long x 17" wide x 13" tall. Steel, side-mount style tool box provides out-of-the-way storage. Tamper-resistant lock and pry-resistant lid help deter theft. Sits 7" above truck bed rails.
Installation Notes:
Drilling required for installation
PowerSync accessories require a Hitch Wiring Harness (sold separately). Intended for models with factory tow package only.
More Information >Truck Tool Box Specs:
Features:
60" Long x 12-3/4" wide x 11-1/8" tall. Side-mount-style tool box for out-of-the-way storage; steel construction; locking paddle handles; crowned lid with full-pan support. Sits 6" above truck-bed rails.
More Information >Truck Tool Box Specs:
Features:
48" Long x 12-3/4" wide x 11-1/8" tall. Side-mount-style tool box for out-of-the-way storage; steel construction; locking paddle handle; crowned lid with full-pan support - all at a reasonable price. Sits 5" above truck-bed rails.
More Information >Truck Tool Box Specs:
Features:
60" Long x 12-3/4" wide x 11-1/8" tall. Side-mount-style tool box for out-of-the-way storage; steel construction; locking paddle handles; crowned lid with full-pan support. Sits 6" above truck-bed rails.
More Information >Truck Tool Box Specs:
Features:
20-1/2" Long x 8-1/2" wide x 18-7/8" tall. Wheel-well-style tool box; steel construction; 5 drawers for storage; single, drop down door locks for security.
More Information >Videos
for Truck Tool Box
Help Articles
for Truck Tool Box
Expert Answers
for Truck Tool Box
Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA…
view full answer...I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...It sounds like you have an error on the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part #LC675817. There are a lot of different errors that may possibly pop up with the Lippert Ground Control. Can you tell me exactly what the…
view full answer...Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The Hayes Air Actuated Trailer Brake Controller - 1 to 4 Axles - Proportional #HA100400C mounts to the inside of your 2007 Nemar Essex at the dash just like other electric brake controllers will. It needs to be installed on the inside of the…
view full answer...According to my research, AL-KO 8490 references an AL-KO hub for 3,500 lb axles with a 10 x 2-1/4" drum and a 5 on…
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…
view full answer...Good news, I can help you find a tire for your Sundown Horse Trailer. The 205/90-15 is a close tire size to the 7.00-15. The closest size to a 7.00x15 tire that we offer would be a 225/75-15. One 225/75-15 tire that could work for you is the Kenda…
view full answer...