Vehicle Style: 6-1/2 Foot Bed - with RamBox Change
Roll-Up - Soft Cover Specs:
Features:
Increase your gas mileage and improve the look of your truck in minutes with a TruXedo Lo Pro tonneau cover. Top-quality cover installs quickly, features an automatic tension control, and rolls up in seconds to store conveniently behind the cab.
Tech Tip:
Optional Stake Pocket Covers (TX22AR) available for installation (sold separately).
More Information >Videos
for Tonneau Cover
Help Articles
for Tonneau Cover
Expert Answers
for Tonneau Cover
There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…
view full answer...Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…
view full answer...Hey Tony, The etrailer Hard Tonneau Cover #e55DR does not come with a built in lock, but if you lock the tailgate of your truck then no would would be able to open the cover without damaging it or the tailgate.
view full answer...Hey there Harry, that's a good question, as the difference is the strength of the aluminum vs. polycarbonate Retrax tonneau covers that fit your 2024 Ram 3500 with a 6-1/2 foot bed. The aluminum RetraxPRO MX Hard Tonneau Cover #RT80232 has the…
view full answer...Hey Craig, it sounds like you are asking if the Andersen Ultimate Connection part #AN67VR can be used in the bed of your 2025 GMC Sierra short bed that has the OEM rail kit. If so, yes it can but you will need to use the pop in ball adapter part…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...Hey Tom welcome! Both the Thule TracRac SR Sliding Truck Bed Ladder Rack item #TH94RE for a 6-3/4' bed or item #TH43002XT-780 for the 8' and the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever #item #TH44RE for 6-3/4' or item…
view full answer...Hey Dan! For your 2020 GMC Sierra 2500 crew cab truck, you'll want the Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails item #PE76CV and the Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack item #311-CR4008 you were…
view full answer...We do have tonneau covers that will be better when hauling a 5th wheel. Folding covers are not the best option because when folded up it sits above the bed rails quite a bit. This could result in damage to your trailer, the tonneau and your 2019 Ford…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...It might David but I have no way of knowing for sure without that serial number. The Replacement Key Fob item #RTX36TR matches up with covers that have a serial number of 1701 or higher. There's no other way to identify if this is the one you…
view full answer...