Roll-Up - Soft Cover Specs:
Features:
Soft tonneau cover protects your truck bed and cargo from the elements. Rolls up for full truck bed access. Durable, matte black polyester and vinyl provides a clean look. Manual tension control helps to maintain a tight fit.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
Tonneau will fit models with or without Utili-Track System
More Information >Fold-Up - Hard Cover Specs:
Features:
Folding tonneau cover protects your truck bed and secures your cargo. Folds flat to provide open truck bed access. Clamp-on installation. Cover sits 1" above bed rails.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
Tonneau will fit models with or without Utili-Track System
More Information >Fold-Up - Soft Cover Specs:
Features:
Easy in, easy on - this EZ Fold truck-bed cover clamps onto your side rails in minutes, and it folds up in seconds to allow access to your cargo. The low-profile cover also looks sharp, and it stores behind the cab when not in use.
More Information >Retractable - Manual Cover Specs:
Features:
Retractable cover opens and closes manually with a pop-up, locking handle. That, paired with impact-resistant, 1" thick aluminum, will give you the best security for the cargo in your bed. Sleek, streamlined design complements your vehicle.
More Information >Roll-Up - Soft Cover Specs:
Features:
The Limited Edition roll-up tonneau cover has all the bells and whistles plus tie-down rings, the AutoLatch II, a LED light, the EZ-Retriever II, Cover Care cleaner, and a TrailSeal tailgate gasket. Cover sits 1-1/2" above your truck's bed.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
Tech Tip:
Includes clamp-on installation kit for models with Utili-Trac system. Adapter (40575) is required for Nissan sliding bed extender.
More Information >Retractable - Manual Cover Specs:
Features:
Retractable cover opens and closes manually with a pop-up, locking handle that provides excellent security for your truck bed. Durable polycarbonate is long-lasting and supremely weather resistant. Sleek, streamlined design complements your vehicle.
More Information >Retractable - Powered Cover Specs:
Features:
Long-lasting, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails, and a cargo light makes it easy to see inside the bed. Durable polycarbonate is supremely weather resistant.
More Information >Roll-Up - Soft Cover Specs:
Features:
The LiteRider roll-up tonneau cover balances great features and an affordable price. Get EZ-Dials for quick tension adjustment, an AutoLatch to secure the cover and the Access Slantback design. Cover sits 1-1/2" above your vehicle's bed.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
Tech Tip:
Includes clamp-on installation kit for models with Utili-Trac system. Adapter (40575) is required for Nissan sliding bed extender.
More Information >Retractable - Powered Cover Specs:
Features:
Heavy-duty, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails, and a cargo light makes it easy to see inside the bed. 1" Thick aluminum slats provide the best security.
More Information >Fold-Up - Soft Cover Specs:
Features:
Soft tonneau folds up from the tailgate to provide two-thirds truck bed access. Cover sits 1-1/2" above your vehicle's bed rails. It can be shut with the tailgate open or closed.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Roll-Up - Soft Cover Specs:
Features:
An original Access roll-up tonneau cover balances deluxe features with a reasonable price. Get an XT-Dial easy-grip tension adjuster, AutoLatch II, Element weather seal, and the famous Slantback design. Cover sits 1-1/2" above vehicle's bed.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
Tech Tip:
Includes clamp-on installation kit for models with Utili-Trac system. Adapter (40575) is required for Nissan sliding bed extender.
More Information >Roll-Up - Soft Cover Specs:
Features:
The Lorado roll-up tonneau has all the bells and whistles plus a low profile - it sits only 1" above your vehicle's bed. Features include an XT-Dial, Element weather seal, AutoLatch II, deluxe storage straps and the Access Slantback design.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
Tech Tip:
Includes clamp-on installation kit for models with Utili-Trac system. Adapter (40575) is required for Nissan sliding bed extender.
More Information >Videos
for Tonneau Cover
Help Articles
for Tonneau Cover
Expert Answers
for Tonneau Cover
The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR.…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are…
view full answer...A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will…
view full answer...Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…
view full answer...Great news Rick. The Firestone Ride-Rite Air Helper Springs #F2609 is compatible with the adaptive ride control on your 2024 GMC Sierra 1500 Denali. You can pair this with the Firestone Air Command #F56VV so you will be able to easily adjust the…
view full answer...Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake…
view full answer...There is a solution for you, but the lift kits you referred to such as #K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...