Roll-Up - Soft Cover Specs:
Features:
Soft tonneau cover protects your truck bed and cargo from the elements. Rolls up for full truck bed access. Durable, matte black polyester and vinyl provides a clean look. Manual tension control helps to maintain a tight fit.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
Tonneau will fit models with or without Utili-Track System
More Information >Fold-Up - Soft Cover Specs:
Features:
Easy in, easy on - this EZ Fold truck-bed cover clamps onto your side rails in minutes, and it folds up in seconds to allow access to your cargo. The low-profile cover also looks sharp, and it stores behind the cab when not in use.
More Information >Fold-Up - Hard Cover Specs:
Features:
Folding tonneau cover protects your truck bed and secures your cargo. Folds flat to provide open truck bed access. Clamp-on installation. Cover sits 1" above bed rails.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
Tonneau will fit models with or without Utili-Track System
More Information >Fold-Up - Hard Cover Specs:
Features:
Get style and versatility with this heavy-duty, all-aluminum tonneau. Quad-fold cover sits inside your vehicle's bed rails and secures upright for unrestricted bed access. Tailgate opens and closes with cover up or down. Matte black finish.
More Information >Retractable - Powered Cover Specs:
Features:
Heavy-duty, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails, and a cargo light makes it easy to see inside the bed. 1" Thick aluminum slats provide the best security.
More Information >Retractable - Manual Cover Specs:
Features:
Retractable tonneau with T-slot rails lets you add a ladder rack or roof rack to your vehicle. Aluminum slats and vinyl top layer offer strength and security of a hard cover with seamless look of a soft cover. Cover locks at any point along rails.
Installation Notes:
Cover impedes use of factory bed extender, if equipped
More Information >Retractable - Powered Cover Specs:
Features:
Long-lasting, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails, and a cargo light makes it easy to see inside the bed. Durable polycarbonate is supremely weather resistant.
More Information >Retractable - Manual Cover Specs:
Features:
Retractable hard tonneau cover has rails with T-slots so you can add a ladder rack or roof rack. Heavy-duty aluminum panels and silicon hinges help seal the bed. Cover locks every 12" along the rails and retracts with a quick-release handle.
Installation Notes:
Cover impedes use of factory bed extender, if equipped
More Information >Retractable - Manual Cover Specs:
Features:
Retractable hard tonneau cover protects your cargo and truck bed from the elements. Heavy-duty aluminum panels and silicone hinges help seal bed. Cover locks every 12" along the rails, and it retracts easily with a quick-release handle.
Installation Notes:
Cover impedes use of factory bed extender, if equipped
More Information >Retractable - Manual Cover Specs:
Features:
Retractable cover opens and closes manually with a pop-up, locking handle that provides excellent security for your truck bed. Durable polycarbonate is long-lasting and supremely weather resistant. Sleek, streamlined design complements your vehicle.
More Information >Retractable - Manual Cover Specs:
Features:
Retractable cover opens and closes manually with a pop-up, locking handle. That, paired with impact-resistant, 1" thick aluminum, will give you the best security for the cargo in your bed. Sleek, streamlined design complements your vehicle.
More Information >Retractable - Manual Cover Specs:
Features:
Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.
Installation Notes:
Cover impedes use of factory bed extender, if equipped
More Information >Roll-Up - Hard Cover Specs:
Features:
The Revolver X2 tonneau combines hard cover strength and security with soft cover convenience. The heavy-duty aluminum and vinyl cover sits flush on your vehicle and rolls up for full truck bed access. Easy, no-drill installation.
More Information >Retractable - Powered Cover Specs:
Features:
Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.
Installation Notes:
Cover impedes use of factory bed extender, if equipped
More Information >Fold-Up - Soft Cover Specs:
Features:
Soft tonneau folds up from the tailgate to provide two-thirds truck bed access. Cover sits 1-1/2" above your vehicle's bed rails. It can be shut with the tailgate open or closed.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Fold-Up - Hard Cover Specs:
Features:
Get top-notch style and versatility with this all-aluminum tonneau. Quad-fold cover sits inside your vehicle's bed rails and secures upright for unrestricted bed access. Textured, black paint finish provides durability.
More Information >Roll-Up - Hard Cover Specs:
Features:
Weather-resistant, roll-up cover keeps the gear in your truck bed secure and dry. Rolls up quickly by hand for full access to your truck bed. Aluminum slats keep cover tight and help prevent break in. Requires no drilling to install.
More Information >Videos
for Tonneau Cover
Help Articles
for Tonneau Cover
Expert Answers
for Tonneau Cover
The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR.…
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...Your 265/70R17 size tire is around 31-1/2 inches in diameter. You want to make sure the tire cover you get is large enough and doesn't have to be stretched over the tire.…
view full answer...The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…
view full answer...Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with…
view full answer...Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…
view full answer...Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake…
view full answer...There is a solution for you, but the lift kits you referred to such as #K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System…
view full answer...Yep, you're exactly right; the distance from the center of the hitch pin hole to the welded gusset is indeed four inches on the Curt Ball Mount for…
view full answer...