Vehicle Style: 2500 and 3500 - 6-1/2 Foot Bed - without RamBox Change
Roll-Up - Hard Cover Specs:
Features:
Weather-resistant, roll-up cover keeps the gear in your truck bed secure and dry. Rolls up quickly by hand for full access to your truck bed. Aluminum slats keep cover tight and help prevent break in. Requires no drilling to install.
More Information >Retractable - Powered Cover Specs:
Features:
Heavy-duty, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails. Install crossbars (sold separately) in the slotted rails to carry bikes, kayaks, and more above your bed.
More Information >Roll-Up - Hard Cover Specs:
Features:
Hard, roll-up cover with heavy-duty vinyl fabric and thick aluminum slats is stylish and durable. Low-profile, self-leveling rails ensure easy install. Latches at tailgate and mid-bed offer enhanced security. Cover removes in seconds without tools.
More Information >Roll-Up - Hard Cover Specs:
Features:
The Revolver X2 tonneau combines hard cover strength and security with soft cover convenience. The heavy-duty aluminum and vinyl cover sits flush on your vehicle and rolls up for full truck bed access. Easy, no-drill installation.
More Information >Roll-Up - Hard Cover Specs:
Features:
Hard, roll-up cover with premium, 5-layer fabric and thick aluminum slats is stylish and durable. Low-profile, self-leveling rails ensure easy install. Latches at tailgate and mid-bed offer enhanced security. Cover removes in seconds without tools.
Tech Tip:
Optional Stake Pocket Covers (TX22AR) available for installation (sold separately).
More Information >Retractable - Powered Cover Specs:
Features:
Heavy-duty, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails, and a cargo light makes it easy to see inside the bed. 1" Thick aluminum slats provide the best security.
More Information >Retractable - Powered Cover Specs:
Features:
Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.
More Information >Retractable - Powered Cover Specs:
Features:
Retractable tonneau cover has rails with T-slots so you can add a ladder rack or roof rack. Remote opens and closes cover in under 30 seconds. Cover locks at any point along rails. Aluminum panels with silicon hinges offer superior water resistance.
More Information >Retractable - Powered Cover Specs:
Features:
Long-lasting, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails. Install crossbars (sold separately) in the slotted rails to carry bikes, kayaks, and more above your bed.
More Information >Retractable - Powered Cover Specs:
Features:
Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.
More Information >Retractable - Powered Cover Specs:
Features:
Long-lasting, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails, and a cargo light makes it easy to see inside the bed. Durable polycarbonate is supremely weather resistant.
More Information >Retractable - Powered Cover Specs:
Features:
Electric, retractable tonneau cover with T-slot rails lets you add a ladder rack or roof rack to carry all your sports and recreational gear. Durable aluminum cover locks at any point along the rails, and the matte black looks great on your vehicle.
More Information >Videos
for Tonneau Cover
Help Articles
for Tonneau Cover
Expert Answers
for Tonneau Cover
The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4"…
view full answer...A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will…
view full answer...Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…
view full answer...Great news Rick. The Firestone Ride-Rite Air Helper Springs #F2609 is compatible with the adaptive ride control on your 2024 GMC Sierra 1500 Denali. You can pair this with the Firestone Air Command #F56VV so you will be able to easily adjust the…
view full answer...Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake…
view full answer...There is a solution for you, but the lift kits you referred to such as #K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the…
view full answer...