Vehicle Style: 2500 and 3500 - 6-1/2 Foot Bed - without RamBox Change
Fold-Up - Soft Cover Specs:
Features:
The Trifecta 2.0 tonneau combines the look of a soft cover and the convenience of a hard, folding cover. Tri-fold, vinyl cover has a rail-free design, and it includes a self-contained, easy-to-use clamping system for fast installation and removal.
More Information >Fold-Up - Soft Cover Specs:
Features:
The Trifecta Signature 2.0 tonneau mounts using a self-contained clamping system instead of rails, allowing for temporary use and rapid installation and removal. This soft, tri-fold cover sports a matte black canvas skin that is durable and sleek.
More Information >Fold-Up - Soft Cover Specs:
Features:
Extang E-series tonneau cover features a tri-fold vinyl cover and an easy-to-use clamping system for installation and removal. Lightweight aluminum frame. Full perimeter seal keeps water out and prevents leaks.
More Information >Fold-Up - Soft Cover Specs:
Features:
The Trifecta ALX includes the same features as the Trifecta 2.0 but with a Secure Rotary Release Latching System at the tailgate and an automatic latching feature that willl make getting goods in and out of your truck bed that much faster.
More Information >Fold-Up - Hard Cover Specs:
Features:
Solid Fold 2.0 tonneau features a durable tri-fold cover with a rail-free design, works with your existing 18" - 20" standard toolbox, and has an easy-to-use clamping system for installation and removal. Watertight seal against toolbox.
More Information >Fold-Up - Soft Cover Specs:
Features:
Trifecta 2.0 tonneau features a tri-fold, vinyl cover with a rail-free design, works with your existing 18" - 20" standard toolbox, and has an easy-to-use clamping system for installation and removal.
More Information >Videos
for Tonneau Cover
Help Articles
for Tonneau Cover
Expert Answers
for Tonneau Cover
The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb…
view full answer...A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will…
view full answer...Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…
view full answer...Great news Rick. The Firestone Ride-Rite Air Helper Springs #F2609 is compatible with the adaptive ride control on your 2024 GMC Sierra 1500 Denali. You can pair this with the Firestone Air Command #F56VV so you will be able to easily adjust the air…
view full answer...Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake controller…
view full answer...There is a solution for you, but the lift kits you referred to such as #K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…
view full answer...