Towing Mirrors Specs:
Features:
...outward to accommodate different factory mirrors Pivoting joints in the middle of the arms allow further adjustability Sliding clips grab onto the edge of your factory mirror and adjust to fit varying...
More Information >Towing Mirrors Specs:
Features:
...outward to accomodate different factory mirrors Pivoting joints in the middle of the arms allow further adjustability Sliding clips grab onto the edge of your factory mirror housing and adjust to fit...
More Information >Towing Mirrors Specs:
Features:
...Towing mirrors strap onto your factory side-view mirrors to extend your lines of sight by 5" Allows you to safely and easily change lanes, back up, pass, and park Aerodynamic ...
More Information >Towing Mirrors Specs:
Features:
...visibility of both the road and your trailer Flat mirrors reflect the true representation of object size Adjustable arms fit most car and truck applications Included rubber straps and clips allow for a secure...
More Information >Towing Mirrors Specs:
Features:
...Towing mirrors clip onto your factory side-view mirror to extend your line of sight up to 7" Allows you to safely and easily change lanes, pass, and park while towing a trailer ...
More Information >Towing Mirrors Specs:
Features:
...These universal dual-view, clip-on mirrors offer an extended view of both the driver's and passenger's sides while you're towing. The dual mirrors are independently adjustable and allow...
More Information >Towing Mirrors Specs:
Features:
...different factory mirrors Pivoting joints in the middle of the arms allow further adjustability Sliding clips grab onto the edge of your factory mirror housing and adjust to fit varying mirror thicknesses...
More Information >Videos
for Towing Mirrors
Help Articles
for Towing Mirrors
Expert Answers
for Towing Mirrors
The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…
view full answer...I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…
view full answer...The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the…
view full answer...You will need the Ceiling Garnish for Fan-Tastic Vents Roof Vent #FVK1060-81 as it is specific to your Dometic Fantastic Fan 1450. The Ceiling Garnish for Ventline Roof Vent #VA0445-37 is going to have rounded corners as opposed to the square on…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure…
view full answer...