Expert Review Video:
Flat Tow Wiring Harness Specs:
Accessory Parts:
Features:
This LED light bar plugs right into your 12V outlet and needs no hardwiring, while the transmitter plugs into your RV's 7-way socket. Uses a suction cup to attach to your car's back window.
Installation Notes:
Fuse(s) must be pulled during towing. Please check owner's manual
The fuse bypass part listed (or parts if more than one is needed) is required when installing the braking system
Tech Tip:
GM has a technical bulletin for the 2008-2013 Buick Enclave. Please view the bulletin at GMTSB.
More Information >Videos
for Flat Tow Wiring Harness
Help Articles
for Flat Tow Wiring Harness
Expert Answers
for Flat Tow Wiring Harness
Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…
view full answer...When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
view full answer...Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…
view full answer...Hey Steven, thanks for reaching out! I really like your list, but I do have a few alternative suggestions if you don't mind. Here is what I recommend: - Blue Ox Base Plate Kit #BO94FR - etrailer Tow Bar #e47ZR (easier to use than the Roadmaster…
view full answer...Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…
view full answer...Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…
view full answer...What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…
view full answer...Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Yes, it will! You'll want to cut off the 4-way connector of the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR and install the 6-way connector that comes with the Curt Tow Bar 7-Way to 6-Way Coiled Adapter Cord w/ 6-Way Socket…
view full answer...Hey Doug, we can definitely help with all of the parts you need to flat tow your 2024 Jeep Wrangler. The first thing you'll need is a base plate kit. For that the Blue Ox part #BX1139 that you referenced is correct and a great, easy-to-use…
view full answer...Hey James! Congrats on your new purchase! To flat tow your 2022 Jeep Cherokee Trailhawk you will need the following parts: Base Plate Kit - Blue Ox Base Plate Kit item #BX1143. This is designed specifically for the Trailhawk models and will work…
view full answer...