1964 Chrysler 300 Vehicle Air Mattress

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Roland, thanks for reaching out. The Curt Trailer Hitch Receiver C49RJ for the 2027 Chevy Bolt is still in the production/pre-order phase, so to be honest, we don't know what the exact towing capacity and tongue weight capacity will be .…

Hey Nick, thanks for reaching out. We definitely have good options for a flatbed like yours. Based on what you've described, the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550046 is the hitch I recommend. It mounts directly to a…

You've got plenty of room Chris. The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball item #DM8550046 will work great with your setup. It requires at least a 14" × 14" recessed well and works with ones up…

Hey Danny, this is a really great question but B and W states that their fifth wheel to gooseneck adapters like the part #BW83RV actually put less stress on the RV frame than a pin box so the warranty would not be affected. Lippert might take a…

Hey Tara! That is a good question! Thankfully, Napier does specifically state that Napier Sportz SUV Awning part #NA99FR will work with minivans. Since the tent secures around the rear liftgate hatch it won't interfere with the sliding doors. The…

Hi Richard; I'm assuming you have the Draw-Tite Max-Frame Trailer Hitch Receiver #75659. You can get new hardware through the Replacement Hardware Kit for Trailer Hitches #RHK. All you need to do is enter "75659" in the Hitch Item…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Dave, thanks for reaching out. We do have a front hitch for your 2026 GMC Sierra 3500HD Denali Diesel. Here is what you'll need: - EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH57FR I double checked with…

Hello John, That’s definitely a frustrating spot to be in, and you’re not alone. This is a pretty common issue on the older GM 2500/3500 trucks, especially with how the factory exhaust is routed on the passenger side. It sounds like you’ve already…

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

Hey James, thanks for reaching out. For the Benton LittleShift Bike Rack #B54VR the pin should be inserted until the "shoulder" of the bolt is flush up against the side of the hitch. I've included a few pictures to help illustrate. If…