Anti-Sway Bars Specs:
Features:
Minimize sway and improve the stability and driveability of your Jeep Wrangler JK. Solid, 1-1/4" chromoly sway bar provides improved handling and safety. Adjustable anti-sway bar lets you choose level of stiffness. For stock ride height.
Installation Notes:
No drilling required for installation
Installation on Rubicon models requires the removal of the Front Sway Bar Electronic Disconnect System.
Tech Tip:
Product does not fit on 2WD models.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. Solid, 7/8" chromoly sway bar provides improved handling, comfort, and safety. Reuses existing vehicle end links and hardware.
Installation Notes:
No drilling required for installation
This replaces the factory sway bar and will reuse the factory end links
Tech Tip:
Product does not fit on 2WD models.
More Information >Anti-Sway Bars Specs:
Features:
Get responsive steering for your Jeep with this gas spring stabilizer. No more wandering or rut tracking. Also lets you back up your rig without disconnecting your tow bar when towing behind your RV. Includes custom brackets.
Installation Notes:
No drilling required for installation
Tech Tip:
Product does not work on Rubicon models with the Electronic Swaybar Disconnect feature.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and improve the stability and driveability of your Jeep Wrangler JK. Solid, 1-1/4" chromoly sway bar provides improved handling and safety. Adjustable anti-sway bar lets you choose level of stiffness. For 3" to 5" lifts.
Installation Notes:
No drilling required for installation
Product is designed for vehicles that have been lifted 3" to 5"
Installation on Rubicon models requires the removal of the Front Sway Bar Electronic Disconnect System.
Tech Tip:
Product does not fit on 2WD models.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and improve the driveability of your Jeep Wrangler JK. Solid, 1-1/4" chromoly sway bar provides improved handling and safety. Includes quick disconnect end links for off-road use. For 3" - 5" lifts. Drilling required.
Installation Notes:
Drilling is required for installation
Product is designed for vehicles that have been lifted 3" to 5"
Installation on Rubicon models requires the removal of the Front Sway Bar Electronic Disconnect System.
Tech Tip:
Product does not fit on 2WD models. Product includes Quick Disconnect end links for offroad use.
More Information >Anti-Sway Bars Specs:
Features:
Get responsive steering for your Jeep with this gas spring stabilizer. No more wandering or rut tracking. Also lets you back up your rig without disconnecting your tow bar when towing behind your RV. Includes custom brackets.
Installation Notes:
No drilling required for installation
Tech Tip:
Product does not work on Rubicon models with the Electronic Swaybar Disconnect feature.
More Information >Videos
for Anti-Sway Bars
Help Articles
for Anti-Sway Bars
Expert Answers
for Anti-Sway Bars
The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...The number you provided,…
view full answer...Yes, the Solera Slide Topper part #LCV000168106 is the correct fit for your flange width of 90-1/2 inches. This specific model has a box width range of 86 to 91-3/4 inches which is perfect for your width listed.
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1…
view full answer...Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...Filter Products (12)
Contact and Help
What our customers are saying:
Received order, shipping and service was very fast. Thanks
Kurt
St. Louis, MO