Expert Review Video:
Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Vehicles with fifth wheel brackets along the side of the frame will require drilling.
Product does not fit vehicles equipped with Adaptive Ride Control
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Vehicles with fifth wheel brackets along the side of the frame will require drilling.
Product does not fit vehicles equipped with Adaptive Ride Control
Tech Tip:
Product does not fit AT4 models - those models should use part AL88388.
More Information >Vehicle Suspension Specs:
Features:
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Becomes more rigid as more weight is added for great performance when you're hauling a heavy load.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Product does not fit vehicles equipped with Adaptive Ride Control
More Information >Vehicle Suspension Specs:
Features:
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Becomes more rigid as more weight is added for great performance when you're hauling a heavy load.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Product does not fit vehicles equipped with Adaptive Ride Control
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Product does not fit vehicles equipped with Adaptive Ride Control
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Product does not fit vehicles equipped with Adaptive Ride Control
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
8,600-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling required for installation
This is a Severe Service kit and should only be used on vehicles with a slide-in camper, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
8,600-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling required for installation
This is a Severe Service kit and should only be used on vehicles with a slide-in camper, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling required for installation
Product does not fit vehicles equipped with Adaptive Ride Control
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling required for installation
Product does not fit vehicles equipped with Adaptive Ride Control
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Silent Ride urethane bushings prevent rattling.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Silent Ride urethane bushings prevent rattling.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Vehicles with fifth wheel brackets along the side of the frame will require drilling.
Tech Tip:
Product fits AT4 models.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
No drilling required for installation
Vehicles with fifth wheel brackets along the side of the frame will require drilling.
Compatible with in-bed hitch
Tech Tip:
Product fits AT4 models.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling required for installation
This product installs to the frame in the same location as most fifth wheel and gooseneck brackets and may not be compatible with in-bed hitch. Refer to instructions for location of installation.
Product does not fit vehicles with a Diesel engine
Tech Tip:
Models which have been lifted will require the 2 inch lift spacer kit F2366 (sold separately)
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling required for installation
This product installs to the frame in the same location as most fifth wheel and gooseneck brackets and may not be compatible with in-bed hitch. Refer to instructions for location of installation.
Product does not fit vehicles with a Diesel engine
Tech Tip:
Models which have been lifted will require the 2 inch lift spacer kit F2366 (sold separately)
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Vehicles with fifth wheel brackets along the side of the frame will require drilling.
Product does not fit vehicles equipped with Adaptive Ride Control
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Vehicles with fifth wheel brackets along the side of the frame will require drilling.
Product does not fit vehicles equipped with Adaptive Ride Control
Tech Tip:
Product does not fit AT4 models - those models should use part AL57388.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
1,000-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Product does not fit vehicles equipped with Adaptive Ride Control
More Information >Vehicle Suspension Specs:
Features:
1,000-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Product does not fit vehicles equipped with Adaptive Ride Control
More Information >Videos
for Vehicle Suspension
Help Articles
for Vehicle Suspension
Expert Answers
for Vehicle Suspension
Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles -…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version…
view full answer...Filter Products (54)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD