Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.
Installation Notes:
No drilling required for installation
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.
Installation Notes:
No drilling required for installation
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling required for installation
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling required for installation
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling required for installation
Designed for use on Cutaway models only
Check vertical clearance above spring pack before purchase. Product only fits vehicles with floor pan that is higher than top of frame
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling required for installation
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling required for installation
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Becomes more rigid as more weight is added for great performance when you're hauling a heavy load.
Installation Notes:
No drilling required for installation
Product is designed for Motor Home models
More Information >Vehicle Suspension Specs:
Features:
5,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Becomes more rigid as more weight is added for great performance when you're hauling a heavy load.
Installation Notes:
No drilling required for installation
Product is designed for Motor Home models
More Information >Vehicle Suspension Specs:
Features:
4,600-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for those who often tow or haul heavy loads.
Installation Notes:
No drilling required for installation
Designed for use on Cutaway models only
Check vertical clearance above spring pack before purchase. Product only fits vehicles with floor pan that is higher than top of frame
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling required for installation
Product is designed for use on Cutaway models only
Product is designed for vehicles with approximately 2-1/2 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
4,070-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Increases ride height by 1-3/4".
Installation Notes:
No drilling required for installation
Designed for vehicles with Diesel Engine only
Product will add approximately 1.75" of lift to suspension
More Information >Vehicle Suspension Specs:
Features:
4,070-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Increases ride height by 1-3/4".
Installation Notes:
No drilling required for installation
Designed for vehicles with Diesel Engine only
Product will add approximately 1.75" of lift to suspension
More Information >Videos
for Vehicle Suspension
Help Articles
for Vehicle Suspension
Expert Answers
for Vehicle Suspension
For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based…
view full answer...What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8"…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...Filter Products (26)