Vehicle Suspension Specs:
Features:
...Adjusts progressively to the weight of your load - the more you load onto your vehicle, the stiffer they become Reduces body roll and helps level your truck Withstands extreme temperatures Durable springs...
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
...coil spring inserts Application: rear coil spring suspensions Designed to work with a suspension system that is in good working order Coil SumoSprings will not increase your vehicle's weight-carry...
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
...Helper springs upgrade your vehicle's rear suspension for improved driver control and comfort Keep your vehicle level when you're towing or hauling a heavy load Help to abso...
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
...Helper springs upgrade your vehicle's front suspension for improved driver control and comfort Support heavy front-end loads to keep your vehicle level Help to absorb bumps and sh...
Installation Notes:
No drilling required for installation
More Information >Videos
for Vehicle Suspension
Help Articles
for Vehicle Suspension
Expert Answers
for Vehicle Suspension
Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles -…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version…
view full answer...Filter Products (8)
Contact and Help
What our customers are saying:
The people answering the phones were professional & knowledgeable. All this and the best prices on the internet, How can you go wrong?
Bill
Vero Beach, FL