Spare Tire Bike Racks Specs:
Features:
Pair your door-mounted spare tire with the SR1 to transport 1 or 2 bikes. Sturdy rack adjusts to center bikes on vehicles with offset spares. The mounting brace clamps around tires up to 15" wide, and 3 straps secure rack to tire.
More Information >Spare Tire Bike Racks Specs:
Features:
This rack lets you carry 2 bikes of different sizes and styles on your spare tire. It has dual arms with anti-sway cradles, and it adjusts for various tire sizes and for offset spares. Locks secure your bikes to the rack and the rack to your vehicle.
More Information >Spare Tire Bike Racks Specs:
Features:
This spare-tire-mounted rack lets you carry 2 bikes on folding dual arms. SuperCush anti-sway cradles with ratcheting ZipStrip straps offer safe bike transport. Tool-free installation with universal mounting plate. Includes locks for bikes and rack.
More Information >Spare Tire Bike Racks Specs:
Features:
Lightweight rack lets you carry 3 bikes on your vehicle's spare tire. Arms are offset to fit either the right or left side of your vehicle and the rear bar adjusts to fit over wider spare tires. Attaches with 2 cam-buckle straps.
More Information >Spare Tire Bike Racks Specs:
Videos
for Spare Tire Bike Racks
Help Articles
for Spare Tire Bike Racks
Expert Answers
for Spare Tire Bike Racks
For your 2015 Jeep Wrangler Unlimited Sahara we have the Rampage Mass Articulation Front Recovery Bumper #RA88509 that fits which has 1-inch D-rings so you could use the D-Ring adapter part #BX88358 with your Blue Ox tow bar.
view full answer...You can install a Yakima SpareRide 2 Bike Rack - Spare Tire Mount - Folding Arms #Y02599 on a 2020 Jeep Wrangler JLU, but it's likely going to interfere with the backup camera. There are relocation kits available for this but I'm not…
view full answer...The best hitch for your 2023 Jeep Wrangler is the Curt Trailer Hitch item #C13392. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity, and…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Your best option for an e-bike rack that will clear the hitch pin to spare dimension of 10 inches would be the Hollywood Racks RV Rider part #HR87FR which has this dimension as 12 inches and since it uses frame clamps instead of wheel clamps is…
view full answer...To move the arms you just need to push up on the spring loaded bolts to release the arms and swing them into place. That will move the arm up and allow you to move it freely back and forth. When you release the end of the arm with the nut and…
view full answer...What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…
view full answer...The Malone Hanger Spare Tire Carrier #MPG2147 will work on the spare tire of your daughter's 2021 Jeep Wrangler since the width of your factory spare tire is 9-1/2 inches wide. As far as bike frame adapters for the Malone Hanger, you will need…
view full answer...For your 2002 Subaru Impreza WRX sedan the Inno roof rack part numbers #INXB100-2, #INXS200, and #INK106 is a confirmed fit and would be a great solution to carry your roof basket.
view full answer...When installing any trailer hitch you would have to use all attachment points specified in the instructions. So if you wanted a higher capacity hitch like #13314 you would have to have that center tow loop welded back onto the vehicle. You will want…
view full answer...You would have to measure from your hitch pin hole out to the furthest point out on the rear spare of your 2007 Toyota RAV4 to determine if the #C18030 will clear it. The rack has a distance of 7-3/4 inches from the pin hole to nearest portion of the…
view full answer...The 1-1/4 inch part of the shank on Curt bike rack #C18030 is steel. The sleeve to adapt the rack to fit a 2 inch hitch is plastic. The other option would be to use a steel reducer sleeve in a 2 inch hitch, #HT02, and then not use the plastic…
view full answer...Filter Products (10)
Contact and Help
What our customers are saying:
Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!
Ryan
Portland, OR