Vehicle Snowplow: K2RAMP8219ELT
Price: $2,223.29
Mounting Kit: K284130
Price: $300.19
Complete Kit:
Snow Plow Specs:
Snow Plow Specs:
Features:
Residential snowplow with 3-position, steel-edge blade clears driveways and parking lots. Wireless, electric actuator with internal clutch lets you operate plow from your warm cab. Shock-absorbing springs protect you and your vehicle from impact.
Installation Notes:
No drilling required for installation
More Information >Vehicle Snowplow: K2RAMP8219
Price: $1,843.21
Mounting Kit: K284130
Price: $300.19
Complete Kit:
Snow Plow Specs:
Snow Plow Specs:
Features:
Residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Remote-controlled electric winch lets you raise and lower plow from your cab.
Installation Notes:
No drilling required for installation
More Information >Videos
for Snow Plow
Help Articles
for Snow Plow
Expert Answers
for Snow Plow
If you already have a front mount hitch then all you'll need is a snowplow which uses the hitch receiver for installation. The Detail K2 Elite Snowplow for 2" Hitches part…
view full answer...I checked with Curt and I can confirm that the Curt Front Mount Trailer Hitch item #C22NR does fit the 2022 Chevrolet Silverado 1500 LT with the diesel engine. The only picture we have is from the installation instructions and I have attached it…
view full answer...The usable pin length for both pins that come with the Fastway Hitch Lock and Adjustment Pin Lock Set #FA86-00-4200 measures 3-5/8" (see attached). If this is too short for your 2023 Toyota Tundra please let me…
view full answer...To attach a SnowBear plow to a front hitch like the Curt #C31089 that fits your 2019 Ram 2500 what you need is the hitch adapter part #SB324-120. This will enable your current plow to attach to a hitch so you'd…
view full answer...Hey Brad, thanks for reaching out! What pin box number do you currently have installed on your 2021 Grand Design Reflection 31MB? You should find a sticker with a number like…
view full answer...So the number GH-8045AL you are seeing is the Gen-Y part number for our #GY58GR. So everything is okay with that. As far as the height and the mounting holes it can vary so much from camper and vehicle that I always say it is best to just ensure…
view full answer...Based on my research the Shelby 5107 coupler looks to be an A-frame coupler that accepts a 2" ball, though I was unable to find the weight capacity as this seems to be an older coupler. For a replacement coupler…
view full answer...Curt front mount trailer hitch #C31033 will fit your 2013 Jeep Grand Cherokee as long as the vehicle does not have factory tow hooks. There are no options if it does have factory tow hooks. Though we have heard of at least one customer who had a…
view full answer...I attached a picture that shows the install instructions for the Caster Kit for SnowBear Snowplows #SB324-126 that you referenced.
view full answer...Hey Bruce, while the Gen-Y fifth wheel to gooseneck adapter part #GY58GR doesn't provide additional turning clearance the tapered nose of your 2022 Grand Design Solitude 280RK with the…
view full answer...The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…
view full answer...Both Firestone Ride-Rite kits are good options for your 2024 Ford F-250 Super Duty 4WD, but I like to recommend the 7,500 lb #F95FV rating over the 5,000 lb Rating #F35FV simply because it means the air bags can be used for the same application but…
view full answer...