What our customers are saying:
I've got it 5 minutes ago, thank you for the excellent service! Yevgeniy.
Yevgeniy
Skokie, IL
Videos
for Snow Plow
Help Articles
Expert Answers
I checked with Curt and I can confirm that the Curt Front Mount Trailer Hitch item #C22NR does fit the 2022 Chevrolet Silverado 1500 LT with the diesel engine. The only picture we have is from the installation instructions and I have attached it…
If you already have a front mount hitch then all you'll need is a snowplow which uses the hitch receiver for…
The usable pin length for both pins that come with the Fastway Hitch Lock and Adjustment Pin Lock Set #FA86-00-4200 measures…
To attach a SnowBear plow to a front hitch like the Curt #C31089 that fits your 2019 Ram 2500 what you need is the hitch adapter part #SB324-120. This will enable your current plow to attach to a hitch so…
Hey Brad, thanks for reaching out! What pin box number do you currently have installed on your 2021 Grand Design Reflection 31MB? You should find a sticker with a number like…
So the number GH-8045AL you are seeing is the Gen-Y part number for our #GY58GR. So everything is okay with that. As far as the height and the mounting holes it can vary so much from camper and vehicle that I always say it is best to just ensure…
Hey Bruce, while the Gen-Y fifth wheel to gooseneck adapter part #GY58GR doesn't provide additional turning clearance…
I attached a picture that shows the install instructions for the Caster Kit for SnowBear Snowplows #SB324-126 that you referenced.
The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…
Both Firestone Ride-Rite kits are good options for your 2024 Ford F-250 Super Duty 4WD, but I like to recommend the 7,500 lb #F95FV rating over the 5,000 lb Rating #F35FV simply because it means the air bags can be used for the same application but…
Since you're talking about an offset ball and…
Yes, the Draw-Tite Front Mount Trailer Hitch Receiver #DT36MR will fit your 2022 Ram 3500. This has a bolt-on installation with a 9,000 lb line pull and 500 lb vertical load limit. The only exception is if you have a diesel model.
