1996 Truck Bed Sliding Tray

Hi Tom; the CargoGlide 1000 Sliding Tray for Trucks #CG1000-9548 weighs 175 lbs. This is confirmed to fit your 2024 GMC Sierra 1500 long bed.

The Truck Trolley Truck Bed Slide Out Tray for 8's Long Truck Beds item #TR99VR includes the Long Bed Extension Kit item #TR59VR. The Truck Trolley Truck Bed Slide Out Tray item #TR87VR is just the tray.

Hey Mike, thanks for reaching out. The 60" x 23" dimension listed for the #MR87ZV cargo tray is the overall dimensions of the tray. The inside dimensions of the tray are 58-1/4" long x 19-7/8" wide.

Hi Kev; the MORryde RV Cargo Sliding Tray with the 80% extension is only available at 72" long x 48 " wide #MR52FR. If you're alright with a 60% extension we have the MORryde RV Cargo Sliding Tray - 60" x 48" #MR85FR.

Hello Nick, The Hitch ball for the Curt #C60642 will sit above or slightly forward of the rear truck axle. I attached 2 pictures of the underbody of the 2022 GMC Sierra, as you can see that the Curt #C60642 sits in the same spot as the B&W…

Hi Tanner; that is 100% correct. You can replace what you have now with the B&W Continuum Weight Distribution Head Assembly - 2-1/2" Shank #BW68FR if you do not want to use an adapter sleeve on your hitch. It would be great if you could just…

Yes, it does Gary! The Blue Ox Base Plate Kit item #BLU86HR has been confirmed to fit the 2025 Ford Maverick hybrid. I have linked a installation video below along with the instructions so you can see how to get it set up. If you have any additional…

For a 2022 Ram 1500 we carry a few Bedslide options but they all have a 4-1/2" height so depending on the fridge/cooler you plan on hauling around you may run into some clearance issues with your RetraxPro tonneau cover. The Bedslide options we…

The base plate kit that I recommend for your 2013 Ford C-Max is the Blue Ox #BX2639. This will work perfectly with the Blue Ox Alpha Tow Bar #BX7380 that is rated for 6,500 lbs and comes with coiled safety cables with the same weight rating. For…

Hey Joe! Based on what you were looking at I'm assuming you want to add a ladder rack to carry your kayaks. I'm also assuming you have the 6-1/2' bed on your truck. Since you have the BAKFlip MX4 the best option is to add the TruXedo…

Hey Steven, I would recommend going with the P3 part #90195 over the P2 #90885 for your application. I prefer the full words on the display of the P3 instead of the codes that have to be interpreted.

Hello Bobby. For your 2004 Toyota Tacoma 5'2" bed we have 5 different options, so here they are: - BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum #BAK26404 - Access Limited Edition Soft, Roll-Up Tonneau Cover #834532000692 - Access…