Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I went out to the warehouse and pulled wheel lock set #RG01-150. The overall internal depth of the nuts that thread onto the wheel studs is 1-1/4 inches including the threaded part. The threads make up 3/4 of an inch of that 1-1/4 inch overall…
view full answer...Trailer tires and wheels are not balanced before shipment as the weights could potentially fall off during shipment. Also, trailer tires and wheels, especially of this small size, do not typically need to be balanced and most tire shops…
view full answer...We usually tell people to look for about 3 inches of clearance to account for the total travel capabilities of trailer suspension. If you have less than 3 inches you might be able to compensate by using slightly longer shackle straps. I have…
view full answer...The section width of the Kenda 205/65-10 Bias Trailer Tire, part #AM3H340 is 8.3 inches so the mounting surface of the wheel to the outer edge of the tire on the sides is about 4.2-inches. The wheel has a zero offset. You will also need to make sure…
view full answer...Thank you for the kind words, the K-Source Snap & Zap Custom Towing Mirrors #KS80930 are confirmed to fit all models of the 2021 GMC Sierra 1500, that would include the Denali. The mirrors have a cut out in the bottom that fit around the…
view full answer...Yes, we do have towing mirrors for a 2022 Chevrolet Silverado. I recommend the K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side item #KS80930. I personally drive a Silverado and I think some of the towing mirrors…
view full answer...The Wheel Lock Set for 1/2" Wheel Bolts (2 Locks, 1 Key) #RG01-150 are the traditional 1/2-20. The actual depth of the locking nut is 1-1/4 inches.
view full answer...Your 2021 Audi Q7 is going to have a smart wiring system. For the Curt Echo #C51180 to function properly and receive power you will need to connect your trailer 7-way to the Echo once you plug into the connector on your Audi. The computer in your…
view full answer...I spoke with my contact at Kodiak about the Kodiak Disc Brake Kit, part #K2R35DS, and found out what is included and what you would need to supply. Basically, all you will need to supply is the bolts that the bracket to the axle. Other than that…
view full answer...To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted. With a 5,000lb boat you likely have two 3,500lb torsion axles. The…
view full answer...You are correct. You will want to use the backing plate to sandwich the boards and provide the most secure connection when installing the Brophy Swiveling D-Ring Anchors #RR6K-4 . You can mount these in a recessed hole created by a router or punch…
view full answer...The Redline Wheel Lock Set #RG01-150 are not coded like a door lock is. Essentially, these are unique lug nuts used to make it more difficult for a would-be thief to steal because most people are not going to be carrying around the special socket to…
view full answer...Filter Your Search
Contact and Help