8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". ... Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailerlights.
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. ... The unit is sonically sealed, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
5-5/16" x 3-7/16". Waterproof, incandescent tail light serves as a stop, tail, and turn signal. Shock-proof socket protects bulb against damage. Recessed mount with grommet (not included). ... Features: Rectangular incandescent trailerlight serves 3 functions Stop, turn, and tail Sonically sealed, waterproof housing and lens unit is submersible Incandescent bulb can be easily replaced Shock-proof socket protects bulb against damage Durable polycarbonate snap-on lens and housing Compatible with 12V DC systems Recessed mount with grommet (A33GB - sold separately) Accepts industry standard 3-prong plug (A45PB or A47PB - sold separately) Specs: 5-5/16" long x 3-7/16" tall x 1-15/16" thick Bulb type: incandescent Power draw at 12.8V: Stop/turn: 2.19 amps Tail: 0.49 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # SE4060R Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Highlights Looks cool: With a white X in the middle of red LEDs, this tail light is sure to add to your trailer's or vehicle's looks, instead of detract from them. 4-Function light: Displays tail, brake, turn, and backup signals.
Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This red light can function as a rear side marker or clearance light. ... Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
... It installs easily and covers all your essential lighting needs.Highlights Complete TrailerLighting Setup: Kit includes tail lights, side marker lights, harness, and license bracket. DOT Lighting Coverage: Includes required lighting and reflectors for DOT compliance on trailers.
6-1/2" x 2-3/8" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Surface-Mount Light Surface-mount trailerlights install using a flange or bracket with mounting holes.
6-1/2" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. ... An optional mounting bracket is also available (BK70BB - sold separately) to make it easier to mount the light on your trailer. Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet, which is often sold separately.
6-1/2" x 2-3/8" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A70GB) sold separately.
2-1/2" Diameter. Waterproof, LED trailerlight serves as a side marker light or a clearance light. Durable polycarbonate lens and housing. Recessed mount with grommet (sold separately). ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet, which is often sold separately.
3-3/4" Round. Incandescent trailerlight serves as a stop, tail, turn, and license plate light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.Features: Combination trailer tail light serves 4 functions when properly mounted Stop light, tail light, turn signal light Built-in license plate light illuminates trailer's license plate Incandescent bulb can be easily replaced Durable polycarbonate housing with screw-on lens Red wrap-over lens covers incandescent bulb Compatible with 12V DC systems Stud mount with included 1/4" studs 2-Wire design with power leads - ground through mounting hardware DOT compliant Made in the USA Specs: Configuration: driver side Passenger side: 431800 (sold separately) Dimensions: 3-3/4" diameter x 2-5/8" thick Distance between mounting studs (center on center): 2" Bulb type: 1157 Power draw at 12.8V: 2.2 amps Wire length: 10" 1-Year limited warranty
Waterproof LED clearance/marker light installs on your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-Wire pigtail.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-side fender Sealed, waterproof unit includes durable, polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lens over red and amber LEDs Surface-mount installation - hardware not included Available cover (TN88XR) adds a protective case for the light 2-Wire pigtail White wire for ground Red wire for power Meets or exceeds FMVSS 108 standards Specs: Quantity: 1 fender light Dimensions: 1-1/2" long x 3/4" wide x 3/4" deep Distance between mounting holes (center on center): 1" Diodes: 2 Input voltage: 9V - 14V Power draw: 0.04 - 0.07 amps Wire length: 9" IP rated: 68 Limited lifetime warranty
6-1/2" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. ... Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A70GB) sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
6-1/2" x 2-1/4" Oval. Waterproof incandescent light provides backup light function for trucks or trailers. Shock proof socket protects bulb. Recessed mount with grommet (sold separately). ... Features: Oval backup light for trailers and utility trucks Sonically sealed, waterproof housing and lens unit is submersible Shock proof socket protects incandescent bulb Incandescent bulb can be easily replaced Durable polycarbonate housing and lens Clear lens covers incandescent bulb Compatible with 12V DC systems Recessed mount with grommet (A70GB - sold separately) Accepts industry standard 2-prong plug (A45CB or A49PB - sold separately) Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 2-3/8" thick Bulb type: incandescent Power draw at 12.8V: 0.4 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # SE2238W Wesbar # 203526 Truck Lite # 60204/60284 Grote # 62521 Peterson # M416 Bargman # 40-06-003 Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-1/2" Round. Waterproof, LED trailerlight serves as a side marker light or a clearance light. Durable polycarbonate lens and housing. Recessed mount with grommet (sold separately). ... Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A55GB, A56GB, or A57GB - all sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
6-1/2" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system. ONE Series provides bright light using fewer diodes than other LEDs. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A70GB) sold separately.
6-1/8" x 4-9/16". Incandescent light acts as brake, tail, turn, side marker, side reflector, rear clearance, rear reflector, and license plate light for trailers wider than 80". ... Features: Square trailerlight serves 8 functions for trailers more than 80" wide Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker, and Side Reflex Built-in license plate light illuminates trailer license plate Built-in reflector removes the need for a separate reflector Incandescent bulbs are easy to replace Shock-proof socket protects bulbs against damage Durable plastic housing with screw-on lens Red lens covers incandescent bulbs Compatible with 12V DC systems Stud mount to trailer with included studs Quick connect wiring - simply insert stripped wire into holes for a secure connection Light grounds through mounting studs DOT compliant Specs: Configuration: driver side Passenger side: ST2RB (sold separately) Dimensions: 6-1/8" long x 4-9/16" tall x 2-7/8" thick Distance between mounting studs (center on center): 2" Bulb type; 1157 Number of bulbs: 2 Power draw at 12.8V: Stop/turn: 2.5 amps Tail: 1.0 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # TL4440L Wesbar # 423012 Peterson # M444L Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailerlights.
4-5/16" Round. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A45GB - sold separately).
3-3/4" Round. Incandescent trailerlight serves as a stop, tail, and turn signal light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.Features: Combination trailer tail light serves 4 functions when properly mounted Stop light, tail light, turn signal light Incandescent bulb can be easily replaced Durable polycarbonate housing with screw-on lens Red wrap-over lens covers incandescent bulb Compatible with 12V DC systems Stud mount with included 1/4" studs 2-Wire design with power leads - ground through mounting hardware DOT compliant Made in the USA Specs: Configuration: passenger side Driver side 432000 (sold separately) Dimensions: 3-3/4" diameter x 2-5/8" thick Distance between mounting studs (center on center): 2" Bulb type: 1157 Power draw at 12.8V: 2.2 amps Wire length: 10" 1-Year limited warranty
6-1/8" x 4-9/16". Incandescent light acts as brake, tail, turn, side marker, side reflector, rear clearance, and rear reflector for trailers wider than 80". Stud mount. ... Features: Square trailerlight serves 7 functions for trailers more than 80" wide Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker, and Side Reflex Built-in reflector removes the need for a separate reflector Incandescent bulbs are easy to replace Shockproof socket protects bulbs against damage Durable plastic housing with screw-on lens Red lens covers incandescent bulbs Compatible with 12V DC systems Stud mount to trailer with included studs Quick connect wiring - simply insert stripped wire into holes for a secure connection Light grounds through mounting studs DOT compliant Specs: Configuration: passenger side Driver side: ST3RB (sold separately) Dimensions: 6-1/8" long x 4-9/16" tall x 2-7/8" thick Distance between mounting studs (center on center): 2" Bulb type: Main: 1157 Side marker: 168 Number of bulbs: 2 Power draw at 12.8V: Stop/turn: 2.5 amps Tail: 1.0 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # TL4440 Wesbar # 423062 Peterson # M444 Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailerlights.
Backing into a tight spot or hauling down the highway? Stay visible with this 2-9/16" oblong LED marker light. Red LEDs shine through a clear lens, and sealed, waterproof design handles the elements. Hard-wired for secure power. PC-rated.Highlights High-visibility LED marker light ensures your trailer is seen day & night Durable, weatherproof design withstands rough roads & tough conditions Sealed, waterproof housing is submersible ideal for boat & utility trailers Compact 2-9/16" oblong shape fits most trailer clearance & marker light mounts Easy installation with a hard-wired connection for reliable power FMVSS PC-Rated Compliance meets safety standards for peace of mind Features to Know About Enhanced Visibility Equipped with two red LEDs behind a clear lens, this marker light ensures your trailer remains visible in various conditions.
Backing into a tight spot or hauling down the highway? Stay visible with this 2-9/16" oblong LED marker light. Amber LEDs shine through a clear lens, and sealed, waterproof design handles the elements. Hard-wired for secure power. PC-rated.Highlights High-visibility LED marker light ensures your trailer is seen day & night Durable, weatherproof design withstands rough roads & tough conditions Sealed, waterproof housing is submersible ideal for boat & utility trailers Compact 2-9/16" oblong shape fits most trailer clearance & marker light mounts Easy installation with a hard-wired connection for reliable power FMVSS PC-Rated Compliance meets safety standards for peace of mind Features to Know About Enhanced Visibility Equipped with two red LEDs behind a clear lens, this marker light ensures your trailer remains visible in various conditions.
4-1/4" Diameter, waterproof, incandescent light provides backup light function for trucks or trailers. Shock-proof socket protects bulb. Flush mount with grommet (sold separately). ... Features: Round backup light for trailers and utility trucks Sonically sealed, waterproof housing and lens unit is submersible Shock-proof socket protects incandescent bulb Durable polycarbonate housing and lens Clear lens covers incandescent bulb Compatible with 12V DC systems Flush mount to trailer with grommet (A45GB - sold separately) Accepts industry standard 2-prong plug (A45CB or A49PB - sold separately) Specs: Dimensions: 4-1/4" diameter x 2-1/16" thick Power draw at 12.8V: 2.182 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # SE4000W Wesbar # 3545 Truck Lite # 40204 Grote # 62421 Peterson # 415 Bargman # 40-01-003 Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
Filters
