Tired of cranking your stabilizers by hand? This double legstabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Highlights Speed Up Campsite Stabilizing: Power drill operation raises and lowers stabilizerlegs faster than manual cranking. Stabilize Both Sides at Once: Double leg kit supports RV stabilization during setup and use.
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. Black powder coat finish resists corrosion. ... Features: Stabilizing jacks help keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jacks up for travel, down for use Drop legs extend so you can adjust the height Spring-loaded levers release drop legs for use Steel handle lets you easily fine-tune height adjustment Large foot on each jack provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Installation hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Drop leg travel: 6-1/2" Lift capacity per jack: 650 lbs Maximum load the jack can lift Support capacity per jack: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 2 jacks 1-Year warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Drop-leg jack stabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the drop leg, and pin in place. ... Features: Drop-legstabilizing jack helps keep your lightweight trailer or camper level and steady Great for loading and unloading cargo or for camping Telescoping drop leg lets you adjust the height Once welded to the trailer, pull the pin to lower the drop leg and reinsert it to keep the leg in place Round footplate provides stability Sturdy steel construction Weld-on installation Specs: Height: 20" from bottom of footplate to top of jack Travel: 18" 1-3/16" From center of hole to center of hole Drop leg width: 1-1/4" Mounting bracket dimensions: 8" long x 1-1/2" wide Footplate diameter: 5-1/4" Lift capacity: 2,000 lbs 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. Black powder coat finish resists corrosion. ... Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack. This stabilizer jack is handy for leveling or stabilizing lightweight trailers. Support the front of your cargo trailer so you can load it or unload it without the trailer rocking or tipping.
Tired of cranking your stabilizers by hand? This single legstabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Highlights Speed Up Campsite Stabilizing: Power drill operation raises and lowers the stabilizer faster than manual cranking. Stabilize 1 Side of the RV: Single leg kit supports RV stabilization during setup and use.
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Universal design fits either side of your trailer Stabilizers aren't designated as left-hand (driver's-side) or right-hand (passenger's-side) Specs: Length: 30" 12 Month warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Specs: Length: 24" 12 Month warranty
This replacement leg assembly replaces one side of your PowerTwin II electric stabilizer.Features: Replaces the leg assembly on one side of your PowerTwin II electric stabilizer Features: Works with Ultra-Fab Power Twin II electric stabilizer: 39-941705 and 39-941707 Quantity: 1 leg assembly
If your setup feels a little shaky, this center brace helps tighten things up by linking your stabilizerlegs together. It's a simple way to add extra support on smaller or narrower units and cut down on unwanted movement.Highlights Reduce StabilizerLeg Movement: Center brace links 2 legs together for added support. Tighten Up Smaller Setups: Brace reduces movement on smaller or narrower units.
Hitch-mounted stabilizer system reduces movement of your 5th-wheel trailer, van, or RV while it's parked. Legs have 4 locking positions for 16" of adjustability. ... This will tension the stabilizer, which will lift up at the hitch just enough to brace and steady the rear of your RV. When your trip is over, all you have to do is release the strap, unpin the legs, and fold the stabilizer up before removing it from your hitch.
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Independent motor control lets each leg adjust separately, giving your stabilizer more flexibility to match the ground under your trailer instead of forcing both sides to move together.
... Legs have a combined support capacity of 3,850 lbs. Includes manual hand crank.There is a marking on the inner tube of this jack to help you identify the maximum lift of 25". Beyond that height, the stabilizer does not have a weight capacity rating. Always be sure to raise the jacks equally to avoid bending or twisting your camper's frame, or putting uneven weight on any one the stabilizerlegs.
... Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.Highlights Drill-Powered Stabilizer: No cranking or wiring. Just grab your drill and you're done. Works With Most Cordless Drills: No need to upgrade. 18V to 24V non-impact models get the job done.
Folding RV stabilizer helps reduce bouncing and swaying in your parked trailer or RV when you enter or exit. Easily sets up with no tools. Adjusts to fit trailers with 14" to 28" of frame-to-ground clearance.Features: Stabilizer helps reduce bouncing and swaying in your parked RV or trailer Quick and easy setup requires no tools Tighten strap to pull legs in for increased height Loosen strap to spread legs out for less height Durable nylon strap with steel buckle has a 1,000-lb ratchet strength Folds up for compact, convenient storage Storage bag is included Lightweight aluminum construction Corrosion-resistant anodized silver power coat finish Specs: Application: trailers and RVs with 14" - 28" of clearance between the frame and the ground Individual leg length: 27" 1-Year warranty
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Features: Power stabilizer jacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 78" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
If the 25K lift capacity of the TJD-25100 isn't enough, adding this follow leg will double it! Best for severe-duty tractor trailers, agricultural, and construction uses. Measures 13" when retracted. Drop leg adds an extra 11-1/2".Features: Companion jack works with your etrailer or Ram 2-speed jack (TJD2SP-25100 - sold separately) to raise and lower your gooseneck trailer Ideal for heavy-duty agricultural, construction and industrial trailer uses Hands-free spring return lets you retract the leg using your foot Drop leg with spring-loaded plunger pin increases overall extension for maximum adjustability Faster and easier to align than a pin and clip Round footplate minimizes sinking in soft ground Strong, stable, and durable industrial-sized steel frame Black painted inner and outer tubes Easy maintenance Built-in grease zerks make routine maintenance easy Weld on installation Sidewind handle, cross shaft, and gearbox are sold separately Specs: Lift capacity: 25,000 lbs Total travel: 24-1/2" Screw travel : 13" Drop leg travel : 11-1/2" Overall height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Outer tube length: 25" Outer tube width: 4-3/8" Inner tube width: 4" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" on center Rod shaft diameter: 1" Footplate diameter: 9-7/8" 1-Year warranty
Quickly and easily stabilize your unhitched fifth-wheel trailer with this rustproof, lightweight aluminum tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Simply position the tripod beneath your trailer's king pin and release the chain that holds the stabilizer hitch cup in place. The hitch cup will rise and surround the king pin. Reattach the chain by hooking a bottom link around the bracket on the tripod leg.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Simply position the tripod beneath your trailer's king pin and release the chain that holds the stabilizer hitch cup in place. The hitch cup will rise and surround the king pin. Reattach the chain by hooking a bottom link around the bracket on the tripod leg.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
... After installation, the braces will extend and retract with your landing gear. Hand-tighten tubes to increase stability.Features: Cross braces permanently attach to your 5th wheel's landing gear to reduce your trailer's movement while parked Braces extend and retract with landing gear for easy setup and storage Tubes adjust by hand to maximize stability Pin flags lock tubes in position Black powder coat finish resists corrosion Easy, bolt-on installation with included hardware - no drilling required Specs: Application: square, electric landing gear legs Tube dimensions: Fully retracted: 54" long x 1" diameter Fully extended: 80" long x 1" diameter Weight: 22 lbs 1-Year limited warranty Note: This stabilizer will not work with round, hydraulic landing gear legs.
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Simply position the tripod beneath your trailer's king pin and release the chain that holds the stabilizer hitch cup in place. The hitch cup will rise and surround the king pin. Reattach the chain by hooking a bottom link around the bracket on the tripod leg.
Quickly and easily stabilize your unhitched gooseneck trailer with this heavy-duty steel tripod. Adjustable-height ball makes setup a snap.Reattach the chain by hooking a bottom link around the bracket on the tripod leg. Now use the handle at the base of the hitch ball to fine-tune the height of the stabilizer. Turn counterclockwise until the coupling is complete.
It's never been easier to stabilize, help level and help raise your travel or 5th-wheel trailer. This electric stabilizer spans the width of your rig for maximum support and has dual, 12V motors that function independently for simple leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Stabilizes with wide side support brackets Able to be used at the front of the trailer Not recommended for use on front of motorized vehicle Dual, 12V motors operate independently of one another for simple, effective leveling Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Emergency hand crank included Sturdy steel construction Specs: Application: trailers and RVs with frames from 48" to 80" wide Bracket length: 36" Lift: 30" Weight capacity: 6,000 lbs when extended to 30" Weight capacity when legs are extended to 15" is 3,000 lbs 3-Year warranty
Filters
