Smooth and powerful hydraulic jack lifts your heavy load without your help. Just press the button on the corded remote control to lift and lower your trailer. The large, pivoting foot pad stabilizes the jack even on rough terrain. power unit comes attached to the jack Convenient corded remote control switch Large, pivoting foot pad stabilizes on uneven surfaces Squaretube Durable exterior-grade black finish Easy bolt-on
Fixed leg, square jack with pipe mount offers increased side-load strength and durability. Jack has 15-1/8" retracted height and measures 9-1/4" from mounting bracket to top, excluding ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side
This heavy-duty, sturdy steel jack has easy-to-access grease fittings, a drop leg with spring return and an integrated screw stop to prevent damage to the screw and the nut. Sidewind crank sold separately. outer tubes are weather resistant Direct-weld design Sidewind crank sold separately Standard footplate included Specs: Bracket height: 28-1/2" Retracted 54-1/2" Extended Total lift: 26"
Weld-on jack has a retracted height of 25-1/8" and an extended height of 40-1/4". Square design provides superior side-load support. Offers 15-1/8" of screw travel and 13-3/4" of ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Sidewind handle has
Marine-grade electric jack lifts and lowers your trailer with the push of a button. Sealed motor cover and rust-resistant finishes fend off corrosion. Built-in LEDs illuminate your frame in low-light situations. Total lift includes 8" drop leg. to a 12-volt battery (sold separately) Rust-resistant, inside and out Outer tubing has a Sharkskin finish with a 1,200-hour salt spray rating Inner tubing has a clear Z-Max finish with a 600-hour salt
Footplate and 5/8" diameter pin are included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 15-3/8" retracted height and measures 6-3/8" from mounting bracket to top, excluding handle. Included pull pin holds jack in place Precision-fitted parts provide exceptional stability and reliability Sidewind handle has smooth, ergonomic design for easy cranking Outer tube is gray-paint finished
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. Winding handle included.
Drop leg, square jack offers superior side-load strength and fits any standard A-frame coupler. Crank included.Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side
Customize your Fulton F2 A-frame trailer jack with this wide-track, removable wheel. Offers superior stability and a corrosion-resistant, SharkSkin-finished base that is ideal for marine applications. Pin included.
Replacement jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Welds on.Features: Replaces 1 Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) sold separately Works with units offering up to 3,200 psi extension and
Powerful hydraulic jack with self-contained pump and power unit lets you lift heavy loads with a press of a button. Pivoting foot pad stabilizes the jack on rough terrain. Self-contained pump and power unit comes attached to the jack Pump offers up to 3,200 psi extension and 1,500 psi retraction pressures Pivoting foot pad stabilizes on uneven surfaces Squaretube with durable
The counter-balance valve integrated into this hydraulic jack eliminates drift and retraction while your trailer is stationary. It's ideal for a seasonal trailer that may sit for awhile, and it makes a great upgrade. Right/street-side leg only. loads Large, pivoting foot pad stabilizes on uneven surfaces Squaretube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8"
The counter-balance valve integrated into this hydraulic jack eliminates drift and retraction while your trailer is stationary. It's ideal for a seasonal trailer that may sit for awhile, and it makes a great upgrade. Left/curb-side leg only. loads Large, pivoting foot pad stabilizes on uneven surfaces Squaretube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8"
Replacement right/street side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the right-side RAM square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and left leg (e63VV) sold separately Works with units
Replaces the inner tube and spring-return drop leg for your etrailer square, direct-weld jack with spring-return drop leg (TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH).Features: Replaces the inner tube and spring-return drop leg for your etrailer square, direct-weld jack with spring-return drop leg (TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH) Quantity: 1
Replacement left/curb side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the left-side Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and right leg (e73VV) sold separately Works with units
Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter. Rated for between 2,000 lb and 5,000 lbs. Measures 2" tall. Includes the attachment pin.Features: Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter Includes the attachment pin Specs: Height: 2" Weight capacity: 2,000 lbs to 5,000 lbs Fits
Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter. Rated for between 2,000 lb and 5,000 lbs. Measures 6-3/16" tall. Includes the attachment pin.Features: Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter Includes the attachment pin Specs: Height: 6-3/16" Weight capacity: 2,000 lbs to 5,000 lbs Fits
Replaces the inner tube, drop leg, foot, and pull pin for Curt heavy-duty, direct-weld square jack (28512).Features: Replaces the inner tube, drop leg, foot, and pull pin for Curt heavy-duty, direct-weld square jack with 10,000-lb lift capacity (28512) Specs: Inner tube dimensions: 3-1/2" x
Replaces the gears for your Bulldog sidewind, square-tube jack (BD195356, BD195362, BD195351, BD195352, BD195354, BD195368, or BD195369).Features: Replaces the gears for your Bulldog sidewind, square-tube jack (BD195356, BD195362, BD195351, BD195352, BD195354, BD195368, or BD195369) Includes all that you need to replace or repair
Carbon steel tube welds to your cab and chassis truck to give you a 2-1/2" receiver for towing. Can be cut and customized to act as the center section of your fabricated hitch.Features: Receiver tube welds onto your heavy-duty cab and chassis truck to add towing capabilities Tube can be cut to a custom length to fit your application Heavy-duty carbon steel construction Raw
Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. Drop leg offers 13-1/2" of lift on top of the ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has a
Powder coated, carbon steel receiver tube bolts onto your cab and chassis truck's hitch plate to give you a 2-1/2" hitch for towing or mounting accessories. Fits standard pintle hook ... Features: Receiver tube bolts onto the hitch plate on your cab and chassis truck to add towing capabilities Fits standard pintle hook mounting hole spacing Heavy-duty carbon steel construction Black
2" x 2" Receiver tube is designed for fabricating a custom hitch when a receiver isn't available. Weld-on installation. Tube is 12" long. Raw steel construction is durable.Features: Receiver tube is ideal for fabricating a custom hitch when a receiver tube isn't already available Weld-on installation Durable steel construction Unpainted finish Made in the USA Specs
Filters
