Replacement Square Footplate for Bulldog Round Trailer Jacks w/2" Diameter Tubes - 2" Tall
(286 reviews)
Price: $16.22
In Stock
Replacement Square Footplate for Bulldog Round Trailer Jacks w/2" Diameter Tubes - 2" Tall
Item # BD018564
Retail:$34.64
Our Price: $16.22
You Save: 53%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (286)
- Q & A (0)
- Videos (2)
- Photos
Bulldog Accessories and Parts - BD018564
- Camper Jacks
- Trailer Jack
- Jack Foot
- Bulldog
- 2 Inch Diameter Tubing
Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter. Rated for between 2,000 lb and 5,000 lbs. Measures 2" tall. Includes the attachment pin.
Features:
- Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter
- Includes the attachment pin
Specs:
- Height: 2"
- Weight capacity: 2,000 lbs to 5,000 lbs
Fits:
- Bulldog round-tube, trailer jacks with 2" inner diameter tubes: BD171412, BD171401, BD151110, BD151421, BD151159, BD158452, BD158451, BD151401, BD151101, BD178101, BD151464, BD158488, BD151460, BD154107, BD151109, BD178203, BD154102, and BD178201
0185640301 Replacement Square Footplate for Bulldog Round Trailer Jacks with 2" Inner Diameter Tubes - 2" Tall
California residents: click here
Video of Replacement Square Footplate for Bulldog Round Trailer Jacks w/2" Diameter Tubes - 2" Tall
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Bulldog Trailer Jack BD018564 Review
Today we're going to be taking a look at the Bulldog Detachable Foot Plate. This foot plate attaches and detaches quickly and easily. It does come with the included pin. This foot plate is going to help spread out the weight applied to the base of your jack. This is going to help increase overall stability and it's going to help to prevent sinking on softer services. It's made from a steel construction. It's going to feature a nice rust and corrosion resistant finish so it's going to last a long time.
This is designed to fit a 2-inch diameter inner tube on your jack. We can tell that by taking a measurement from inside edge to inside edge. You can see that's right at 2-inches. The foot plate is going to give us an overall length measurement of 7 and 1/2 inches. It's going to give us a width measurement of 3 and 3/4's of an inch.
The pin hole diameter is going to measure 3/8's of an inch and the actual diameter of the pin is going to measure 5/16's of an inch. Another measurement I want to give you is, I took a measurement from the inside, right here at the bottom of the tube to the center of the pin hole, and when I did that, I got a measurement of 1 and 1/16th of an inch so we could do that from this way as well so you can see that from the bottom of that surface to the center of the pinhole, we're looking at about 1 and 1/16th of an inch. The height of the tube is going to measure right around 2 inches. This is going to have a capacity of 2,000 to 5,000 pounds. Very simple installation. I do want to go ahead and show you how it installs on a jack. I have a Bulldog Jack here today that has a 2-inch inner tube right here, so this just goes directly into the foot plate, line up your pin holes, and then secure it onto the jack by installing the included pin.
That's all there is to it. That's going to do it for today's look at the Bulldog Detachable Foot Plate.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Defective
- Did not arrive in time
Customer Reviews
Replacement Square Footplate for Bulldog Round Trailer Jacks w/2" Diameter Tubes - 2" Tall - BD018564
Average Customer Rating: 4.9 out of 5 stars (286 Customer Reviews)
Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter. Rated for between 2,000 lb and 5,000 lbs. Measures 2" tall. Includes the attachment pin.by: John11/07/2022
Good quality jack that I installed on my trailer after the A frame jack was destroyed while towing my ATV during an elk hunt in the Gila. Excellent customer service and quick shipping.
by: Michael09/21/2023
It works well ! And a great replacement. Easy to install!
by: John Martinez11/05/2016
I was having issues with my RV front jack and every time I would jack it up it would either get stuck on up position or down position and you could hear where the gears were stripped.So I purchased the Bull Dog Item # BD1700100317 as well as the BD018564 as the footplate. I received the item within 3 days of order,open the boxed and installed in less than 5mins.One of the easiest products I have ever installed.I worked the trailer jack up and down with no problems and good amount of extend.Thanks guys for making my camping trips easier..Picture attached of old jack and new one in place.
by: Pete11/05/2017
Great product, high quality design. Install was easy. 10 minutes. The only issue was the handle
Was facing towards my tailgate of my truck.Although there were no instructions included I was able to remove the cover then the pin holding the gear in place and move the handle to the opposite side. Avoiding the dreaded tailgate "PING" every truck owner fears. Great pricing.
by: David 09/28/2023
Worked as advertised.
by: Dust09/12/2023
Good quality, good price
by: Carol09/27/2022
If there was chock system for plates like the wheels have I would give higher rating, placing on board was VERY SLIPPERY, fortunately I had placed the chocks before the trailer moved much as I unhooked. On the plus side it allows full retraction to the A frame much safer. I will now get a wheel for safety parking it.
by: Excelent08/06/2019
Simple 3 x 5/16" x 1"bolt, triangle shaped bolt on for the jack.
3 second 2" tube slip on and safety pin for the foot plate.
by: Brad12/29/2022
The original trailer jack we ordered was currently out of stock and back ordered for a couple of months. Marty was great about getting a hold of us immediately with replacement options to order in place of the back ordered item. Thank you for you timely, courteous help!
by: David S.12/24/2013
Fit perfect. Great addition to the new A-Frame Jack that I installed at the same time.
by: mike03/25/2022
Boat season is upon us in the northeast and I needed a new trailer jack which the week before I had received from etrailer. I'd forgotten to include the wheel and foot plate in my first order,so I made out a second order in the evening. Next day I had an email from George at etrailer letting me that one of my items was out of stock and wouldn't be available till the end of May. SOMEHOW he knew that boat owners were crazy people who HATED to miss any time on the water! He notified me ON HIS OWN, offering a replacement part number and the order went right out. Who does that anymore ? etrailer's philosophy still values old school caring about their customers! Couldn't ask for more and oh by the way, ALL the parts were PERFECT for my project.
by: Lance 10/04/2022
Easy install. Fast shipping. Coating could be a little thicker. Starts rusting after day 1 of installing it.
by: Al C.06/05/2015
The product worked perfectly, after I straightened out some imperfections in my a-frame hitch situation. My utility trailer had seen some unfortunate treatment before I bought it, but now your jack has brought it back to usefullness. Thanks.
by: Doug 05/13/2016
While it has only been a year since I purchased the jack stand and only used it a few times everything seems to be working as advertised, to this point. Received the items very quickly after ordering and installation was very easy.
Doug
1/30/2018
While the product has had limited use within the past year it is still working and performing well. Thanks
by: Cleve05/19/2020
Foot plate fit and is well made. It earns the "Bulldog" name. Trailer seems safer with the foot on my leveling block and there is better protection of the open end of the trailer jack.
by: David McH.11/26/2016
In addition to this support plate, I ordered a Bulldog Jack and a foot plate. During my prepurchase research, completely frustrated at the lack of detailed product information available on most sites, I finely landed on etrailer.com. I found all the information I was looking for, and the pricing was the best I had found, and e trailer offered free shipping. I placed the order and recived a follow up thank you email. The following day I received an update of the shipping status along with a tracking number. I recived my package within a week via 3-day shipping. The care given to packaging was amazing they could have sent fine China in the packaging.
I love this place and will order from here again.
D.
by: Bill K04/23/2016
Most of the tracks I visit with my rig require a buffer between the jack and the paddock surface. This 'sled' makes for an easy resting point that won't damage the asphalt/blacktop/cement.
I ended up drilling several (2) 1/8 inch drain holes along the narrow end lip to get rid of any trapped water that was starting to discolor the sled.
by: John H09/21/2016
Solid foot for jack, provides a stable support for the trailer. Used on a large heavy boat trailer.
John H.
10/17/2017
The parts have held up well, with proper care. Our use is around salt water, typically parts can get abused by nature. Theyve performed well.
by: Red S10/06/2016
It's sturdy. I unintentionally moved the trailer with the Jack down(on soil) about 5 to 6 feet before I realized it. Foot plate was unaffected. Quality product, would recommend, especially from etrailer!
by: Jacob05/10/2018
This is not the only product we've purchased from etrailer. Hitch couplers, jacks, etc. have also been purchased with outstanding service. Fast shipping and great products! Follow up communication to see if all is well. What else would you want? Buy with confidence! Great company!
by: Mike 10/01/2022
Best of kind products. Easy to order, reliable delivery. Good experience
by: Patricia09/19/2020
Very good product I ordered the jack Saturday night and it was here on Wednesday.
by: Jo02/02/2022
etrailer helped me select the right replacement trailer jack and jack foot. I find etrailer extremely knowledgeable and helpful.
by: Rodger12/13/2017
The A-frame Jack and Footplate are the exact type we needed for our trailer. The bolt holes lined up perfectly and installation was a snap, one we removed the old one. Strongly suggest using an anti-seize compound on bolts/nuts when installing for future ease in replacement.
George rushed our shipment at no extra-charge, which was wonderful. His customer service attitude was very positive and the follow-up, post delivery was a very nice touch.
by: Vince K10/30/2020
It has been over 1 year that I have my bulldog trailer jack and it still works great. I'm very pleased with etrailer, they always have everything that I need!
25
286
Show More Reviews
See what our Experts say about this Bulldog Accessories and Parts
- Foot Plate For Bulldog A-Frame Jack BD1700100301Sure thing, we can get you a foot plate for the Bulldog A-Frame Round Jack BD1700100301. The correct foot plate for this jack, that will maintain the jack's 5,000 lb capacity is the following: - Bulldog Detachable Footplate for 2" Jack Tube - 2,000 lbs to 5,000 lbs # BD018564 There isn't a wheel with a higher capacity; the use of a wheel with any A-frame jack reduces its capacity because you have to go by the lowest-rated component, and wheels just aren't as strong as foot plates.
view full answer... - Low Profile Trailer Jack Recommendation for Better Tailgate ClearanceSounds like you are looking for a lower profile jack for your trailer so that the tailgate of the vehicle does not interfere with it. I went to our warehouse and was able to locate an a-frame jack that measured less than 12 inches from the bracket up. The Bulldog Round A-Frame Jack, # BD155032, comes in just under 11-1/2 inches which included the handle. I have attached a picture to illustrate the measurement. This a-frame jack has a lift capacity of 5,000 pounds and mounts to any standard...
view full answer...
- Handle Clearance On the Bulldog Round, A-Frame Jack For Knuckle Clearance When Lowering TrailerI went out to the warehouse and measured the Bulldog Round, A-Frame Jack , item # BD1700100317, and there is 7 inches of clearance from the top of the mounting flange to the bottom of the lowest point on the jack handle. It sounds like this is exactly what you are looking for. You may also be interested in the Bulldog Detachable Footplate, item # BD018564, for the bottom of this jack.
view full answer... - Replacement A-Frame Trailer Jack for a 2006 Forest River Wild Wood TrailerIt sounds like you have a 5,000 pound capacity A-frame trailer jack. There are many options in this category. If we narrow it down to top wind, bolt-on jacks with a round tube, there are 4 possible options. The 14 and 15 inch lift specification is how much the inner leg travels. For a jack with 15 inches of travel, I recommend the Bulldog Round, A-Frame Jack, # BD155032. If you need a foot plate, you can add # BD018564. I have included a link to a video showing this jack being installed.
view full answer... - Looking for Shorter A-Frame Jack to Clear my TailgateI went to our warehouse and was able to locate an a-frame jack that measured less than 12 inches from the bracket up. The Bulldog Round A-Frame Jack, # BD155032, comes in just under 11-1/2 inches which included the handle. I have attached a picture to illustrate the measurement. This a-frame jack has a lift capacity of 5,000 pounds and mounts to any standard a-frame coupler. If you would like a footplate for the jack, Bulldog offers the Detachable Footplate, # BD018564. If you are still...
view full answer...
- Recommended Swivel Jack For Trailer Tongue With Caster Wheel And FootplateFor your swivel jack, I recommend the Bulldog Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs # BD151443. This will give you the ability to use a caster wheel like # BD500245. For a footplate you can use # BD018564. These are able to be removed with a simple pin when not in use.
view full answer... - Replacement for a Fulton Marine Trailer Jack Model 0926012The most comparable replacement for your Fulton model 0926012 3K capacity A-frame trailer jack would be the Bulldog # BD1550101344 which offers the same capacity and amount of lift as your current jack. The jack features a zinc finish that offers good corrosion resistance. You could certainly go with a higher 5000 lb capacity jack like the Bulldog 1700100117, but we don't offer that jack. If you're wanting something with a bit of a higher capacity, I'd recommend something with a tough...
view full answer... - Is the Wheel/Foot Supposed To Be Loose On the Bulldog Round, Pipe-Mount Swivel JackYes, there will be play between the wheel part # BD500245 or foot part # BD018564 on the Bulldog Round, Pipe-Mount Swivel Jack part # BD1541150301. This is common across most trailer jacks as the tolerances between the inner tube and wheel/foot are not very precise.
view full answer... - Installation Of Square Drop Leg A-Frame Jack On Coupler With Round HoleThe drop leg jacks that we offer have square tubing. You mentioned that the round hole you have on your coupler is 2-3/8 inches diameter. The tubing on the Bulldog Square, A-Frame Jack, part # BD195318 you referenced measures 3 inches diagonally. you would have to modify the hole in your coupler to make this jack fit. We do offer a Bulldog Round, A-Frame Jack, part # BD155032. This has a capacity of 5000 lbs and has a 2-1/4 inch outer tube diameter. I would then recommend the Bulldog...
view full answer... - What is the Extended Length of the Inner Jack Tube of the Bulldog Jack BD1541150301I went out into our warehouse and measured a Bulldog Jack, Sidewind Swivel, part # BD1541150301, and found that when the jack is fully extended the amount of the inner tube that is exposed is 11 inches. The overall length when the jack is fully extended is 27-13/16 inches. The inner tube diameter is 2 inches. If you wanted a wheel for the bottom of this jack I would recommend a replacement 6 inch caster, part # BD500245. You should note that this would reduce the overall capacity from...
view full answer... - Availability of a Pipe Mounted Trailer Jack with a Wheel Caster or Foot Plate OptionThe Bulldog Pipe Mount Jack part # BD1541150301 would work well for you. This jack is a pipe mount like you would need and has the ability to install a wheel like part # BD500245 or a foot plate like part # BD018564. You should note that with the wheel the jack would be limited to 1,500 lbs of capacity even though the jack is rated for 2,000 lbs.
view full answer... - Replacement Bulldog Model 1550220117 A-Frame Trailer JackI do have a solution for you, however there is not an inner pipe/tube replacement available that will fit your Bulldog A-Frame Trailer Jack. We do however have an exact replacement for your model 1550220117 Bulldog Jack with the Bulldog Round A-Frame Jack # BD155022. This 2,000 pound jack features a total lift of 15 inches and a retracted bracket height of 8-13/16 inches. It has an outer tube diameter of 2-1/4 inches. The pricing information will be listed on the product page. If you...
view full answer... - Bolt and Bolt Hole Dimensions on the Bulldog Round Snap-Ring Swivel JackThe image you referenced from our question and answer section does provide the dimensions from bolt hole center to bolt hole center. I went out to the warehouse and took additional measurements of the Bulldog Round, Snap-Ring Swivel Jack, # BD151443, for you. The dimensions between the inner edges of the bolts holes on this jack are 5 inches by either 3-15/16 inches or 2-15/16 inches. The diameter of the bolts used for this jack are about 11/32 of an inch. I have included an additional...
view full answer...
- Castor Wheel and Footplate for a Bulldog 2,000 Pound Capacity Round Trailer JackFor a footplate, you can use Bulldog Detachable Footplate, # BD018564. This foot fits 2 inch diameter tubing on Bulldog 2,000 to 5,000 pound jacks. For a wheel, use Replacement, 6 Inch Caster, # BD500245. This wheel also fits on 2 inch diameter tubing. Because the capacity of the wheel is 1,200 pounds, it limits the jack capacity to 1,200 pounds as well.
view full answer... - Bulldog A-Frame Trailer Jack with Hole for Footplate or Caster WheelThe Bulldog A-Frame Jack # BD175000 does not have a hole in it for a caster wheel or footplate. I talked to Bulldog and they said a hole can be drilled. For a similar jack that does have a hole already we have # BD155032. For a caster use # BD500245 and for a footplate use # BD018564
view full answer... - Bulldog Collar Lock Coupler and Tongue Jack for Scamp 13FT Travel TrailerI went out to our warehouse and pulled the Bulldog Collar-Lok Coupler w/ High-Profile Latch, # BD028384 to get a measurement for you. The neck of the Bulldog coupler measures 8". I have included pictures which illustrate these measurements. The Bulldog Collar-Lok Coupler, # BD028384, is a heavy-duty coupler that offers a tight fit with visual indication of proper closure around the ball to ensure quick, easy and secure hookup which will hopefully keep you mishap-free. This weld-on, A-frame...
view full answer...
- Recommended Replacement for the Bulldog A-Frame Trailer Jack Part 1551060301I called Bulldog about the Bulldog A-Frame Jack part 1551060301 that you are wanting to replace and they were able to give me all of the information I need to offer you a solution. The best option we have is the Bulldog Round A-Frame Jack part # BD155033. This jack has the same 2,000 lb capacity, topwind handle, and 15" travel as the one you have now and will work as an exact replacement. If you are wanting to upgrade to a higher capacity then I recommend the Bulldog Round A-Frame Jack...
view full answer... - A-Frame Trailer Jack Options with a Lift Capacity of 5,000 lbsThe Bulldog Square A-Frame Trailer Jack, # BD195318, has a lift capacity of 3,000 lbs and a static weight capacity of 5,000 lbs. If you want a jack with a 5,000 lb lift capacity, I recommend looking at the Bulldog Round A-Frame Trailer Jack, # BD1750290301. This jack has a lift capacity of 5,000 lbs, a top wind crank and a 15 inch lift like the square jack you referenced. At this time we do not have any square tube or drop leg jacks with a 5,000 lb lift capacity. This jack can be used...
view full answer... - Replacement Trailer Jack for 2001 Viking Saga 1906 Pop-Up Camping TrailerThanks for the photo. We don't have a jack that has the integrated bracket like what your trailer has as that is more of a custom application. If you are able to remove the mount and re-weld it, then I recommend the Bulldog Round Jack - No Mount - Topwind - 15" Lift - 5,000 lbs # BD1701480317. This jack can use a footplate like # BD018564. Another option is to use a pipe mount to replace what is currently on your trailer. For that I recommend the Pro Series Round, Pipe-Mount Swivel...
view full answer...
- Pipe Mount Trailer Jack with Caster WheelBecause the fit to the trailer of a pipe mount jack is a little loose due to the large tolerance between the jack and the pipe mount on the trailer, it's pretty rare to find a pipe mount jack with a removable foot that would allow a caster wheel to be installed. The Bulldog # BD150415 which is actually intended for use on a basket lift CAN be used on a trailer according to the folks at Bulldog. They recommend using a foot plate like # BD018564 over a caster wheel most wheesl are only rated...
view full answer... - Sidewind Jack without Mount RecommendationThe jack that would be the best for you would be the Bulldog Sidewind Jack part # BD150152. This jack has no side mount bracket or foot plate. If you wanted to add a foot plate you would want the part # BD018564. The etrailer sticker won't be on the jack you receive, we only put that sticker on the products we photograph to deter theft of our photos.
view full answer... - Is Drive Nut Replaceable on 2,000 lb A-Frame Trailer Tongue JackI did some digging but unfortunately it doesn't look like that nut is replaceable all on its own. I think that is typically changed out with the screw but even then I wasn't able to find anything for a 2K Fulton jack. When I reached out to my contact at Fulton he said that it's actually cheaper to replace the entire jack than it is to replace that screw nut anyways so he recommended just replacing it instead. For a replacement jack I recommend the Bulldog Round, A-Frame Jack # BD155033...
view full answer... - Recommended A-Frame Trailer Jack For Trailer With 3-1/2 Jack Mounting Hole SpacingI have another option for you, but the standard mounting hole spacing is 3" as you mentioned, and we do not offer a jack with mounting hole spacing of 3.5". Instead you will need to weld the jack to the tongue of your trailer. I recommend the Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs # BD155022 if your current jack is a topwind, or # BD155157 if your jack is sidewind. Both of these options have a 2000lb weight rating which will mean you will have an easier time raising...
view full answer... - Replacement A-Frame Jack for a Forest River Pop-Up CamperAll of the a-frame trailer jacks we offer have a 2-1/4" outer tube and a 2" inner tube diameter as that is the standard size. We do not have any a-frame trailer jacks with a 1.910" outer tube and a 1.625" inner tube diameter nor have I heard of an a-frame trailer jack with these dimensions before. However, if the jack hole on your trailer is not at least 2-1/4" diameter then you could easily use a hole saw and open it up to this which will then allow you to use a much more standard size...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Matthew E
Installed by:
Cole B
Installed by:
Randy B
Installed by:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Al C.
6/4/2016
Its still doing the job. Im glad I bought it.