bing tracking image
  1. Accessories and Parts
  2. Bulldog
  3. Camper Jacks
  4. Trailer Jack
  5. Jack Foot
  6. 2 Inch Diameter Tubing
Replacement Square Footplate for Bulldog Round Trailer Jack w/2" Inner Tube - 6-3/16" Tall

Replacement Square Footplate for Bulldog Round Trailer Jack w/2" Inner Tube - 6-3/16" Tall

Item # BD018098
Retail:$36.60
Our Price: $30.28
You Save: 17%
Accessories and Parts
Shipping Weight: 3 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter. Rated for between 2,000 lb and 5,000 lbs. Measures 6-3/16" tall. Includes the attachment pin. 1-800-940-8924 to order Bulldog accessories and parts part number BD018098 or order online at etrailer.com. Free expert support on all Bulldog products. Great prices and Fastest Shipping for Replacement Square Footplate for Bulldog Round Trailer Jack w/2" Inner Tube - 6-3/16" Tall. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (104)
  • Q & A (0)
  • Videos (2)
  • Photos

Bulldog Accessories and Parts - BD018098

  • Camper Jacks
  • Trailer Jack
  • Jack Foot
  • Bulldog
  • 2 Inch Diameter Tubing

Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter. Rated for between 2,000 lb and 5,000 lbs. Measures 6-3/16" tall. Includes the attachment pin.


Features:

  • Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter
  • Includes the attachment pin


Specs:

  • Height: 6-3/16"
  • Weight capacity: 2,000 lbs to 5,000 lbs


Fits:

  • Bulldog round-tube, trailer jacks with 2" inner diameter tubes: BD171412, BD171401, BD151110, BD151421, BD151159, BD158452, BD158451, BD151401, BD151101, BD178101, BD151464, BD158488, BD151460, BD154107, BD151109, BD178203, BD154102, and BD178201


018098 Replacement Square Footplate for Bulldog Round Trailer Jacks with 2" Inner Diameter Tubes




California residents: click here


Video of Replacement Square Footplate for Bulldog Round Trailer Jack w/2" Inner Tube - 6-3/16" Tall

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Bulldog Trailer Jack BD018098 Review

Today we're going to be taking a look at the Bulldog detachable foot plate. This foot plate attaches and detaches from your jack quickly and easily. It does come with the included pin to get is secured. A foot plate is going to help spread out the weight applied to the jack, it's going to help increase overall stability and it's going to help prevent sinking on softer surfaces. It also protects the bottom of the inner tube of the jack. This is made from a steel construction, it's going to have a nice rust and corrosion resistant finish on it.

This is designed to fit jacks with a 2 inch round inner tube and a 2000 to 5000 pound capacity. If we take a measurement from inside edge to inside edge that's where we're going to get the 2 inch measurement from. The base is going to give us a measurement going this direction of 7 1/2 inches, and then going this direction of 3 3/4 of an inch, right around that area. The pine hole diameter is going to measure 3/8 of an inch. The actual diameter of the pin is 5/16 of an inch. On the inside of the tube there's going to be 3 stops, that's going to be where the inner tube of the jack sits on.

From the top of the stops to the center of the pin hole is going to measure 1 inch. From the center of the pin hole to the top of the tube is going to measure 1 inch. The height that this is going to add or the distance that this is going to add to the bottom of the jack is going to be about 5 1/4 inches. We can tell that by taking a measurement from the bottom of the plate to the center of the pin hole because that's where it attaches to your jack. Doing that measurement, going straight across from the center of the pin hole over to the ruler, it's going to be about 5 1/4 inches.

The height of the tube is right around 6 inches tall so overall height is just going to be a hair over 6 inches. This is a really simple installation. All you have to do is place your jack into the tube here on the foot plate or vice versa, just take the foot plate and place it onto the jack like that. Rotate it until you get your pin holes to line up and then secure it by installing the included pin. That's all there is to it. That's going to do it for today's look at the Bulldog detachable foot plate..

Customer Satisfaction Score:


Customer Reviews

Replacement Square Footplate for Bulldog Round Trailer Jack w/2" Inner Tube - 6-3/16" Tall - BD018098

Average Customer Rating:  4.8 out of 5 stars   (104 Customer Reviews)

Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter. Rated for between 2,000 lb and 5,000 lbs. Measures 6-3/16" tall. Includes the attachment pin.

by:

This footplate is strong and very heavy duty. My original problem was with my OEM jack that didn't retract far enough. So I bought a new jack with a much shorter retracted length and then add the detachable foot when I park it. When I hook up the trailer to go somewhere, I remove the foot and have no clearance issues. It works perfect.

Dave B.

6/14/2017

Still working perfect!



by:

This product worked great for trailer



by:

The holes in the footplate for the pin did not line up with the holes to hold it on the jack. I had to use a large drill bit to elongate the holes enough to allow the pin to go in.

Etrailer Expert

Sierra K.

11/29/2021

This is a standard removable footplate that fits jacks with a 2 inch round inner tube with a 2,000lb to 5,000lb capacity. Since it is not specific to any jack, some modifications may be needed.



by:

I like the Bulldog foot because of the options provided with take off/put on ease to give ground clearance when needed. I like the quality of construction and the finish coat. I doubt that this will ever rust. I have this foot on both of my trailers.
The attached foot looks very clean and it will raise completely up out of the way for traveling and road or gutter dips. This is much better than the wheel. I was always taking the wheel off for the road and putting it back on to park the trailer. With this foot I have eliminated that extra work. My trailers are too heavy to move without being hitched to the truck, so I have no need for the wheel.



by:

Footplate pics



by:

I ordered this Bulldog Detachable Footplate to go with my new Bulldog A-Frame Sidewind tongue jack. I ordered the copper finish because I did not see the silver finish on the website. The salesperson I talked to knew I wanted to match my Bulldog trailer jack. Once again etrailer.com came through and shipped the foot that matched the tongue jack that was on the same order. I was pleasantly surprised to see that the foot is a perfect match for the zinc finish on the tongue jack. The foot saves me from having to crank the jack all the way to the ground every time I hook up and unhook from the trailer. The detachable feature allows me to store the foot in my tool box while towing the trailer. I'm very pleased with the products and service I receive from etrailer.com.



by:

Worked great, but it needs a drain hole for the tube. I got it for our camper and found it to be much better than trying to stack blocks under the jack. Easy to remove for travel if you need the clearance. I took it off when we sold the camper and found the leg tube full of ice from the winter. No issues with the foot holding water, just the leg tube.



by:

Used this to replace wheel on Featherlite bumper pull trailer. Arrived quickly and if very good quality



by:

Not as described or depicted.
No pin.
No
pin hole.
Jack tube rests on the stops, there is no other attachment.
It works OK, but I would have preferred a pin.

James

10/31/2018

Etrailer immediately sent the proper item. No questions asked, no return required. The replacement is just what I wanted. A year outdoor and no noticable corrosion.



by:

The footplate arrived on the date promised. Being a bit busy with other projects I didn't get to puting it on until today.

I had to tap the tube to reshape it a bit after our hybrid trailer fell on the ground during the last camping trip. Once rounded, and a little lubricant added, the foot plate fit perfectly. Not having to carry a 8" x 8" block of wood will be wonderful.



by:

Outstanding product. The tube has supporting cut-outs to carry the load of the jack tube from the trailer. This is key. Some of the footplates have no cut-out, so the pin carries the load of the tongue weight. Also, the steel and construction are first rate. Highly recommend this product.



by:

I decided to replace my wheel with a shoe since the trailer is too big and heavy to make much use of the wheel. The shoe is fine quality, fit like it should, and works like I had hoped.

Bill L.

1/31/2015

Its been a dandy!!



by:

A year ago I purchased a used trailer and it did not have footplate. I did purchase the footplate and it came with a securing pin and a rustproof finish. I have been very happy with the item and recommend it to anyone that needs to upgrade.



by:

I had to replace the trailer jack recently. While I certainly got a deal on the jack, I had failed to order a replacement foot, and the old one was too small. etrailer had the product I wanted and the delivery was fast. The attention to service, letting me know it was shipped and the followup for more information and advice is great.



by:

Seems to be well made, nice zinc finish and it comes with the holding pin.
I bought this jack foot & the BD018564
to use on the Bulldog BD1700100301 jack, should cover the differen terrain that I will be jacking my travel trailer on.



by:

High quality product and great customer service. Shipped quickly and packaged well. Purchased along with 5000 lb rated Bulldog jack. Highly recommend etrailer.



by:

I am very happy with the service and knowledge of the customer service. Everything has been shipped out promptly and arrived in great condition. I would recommend them to anyone looking for trailer parts. Thanks for the help.



by:

perfect to give my trailer more stability on the jack with less worry about movement without the wheel attached. The added height works great with those less that even grounds also



by:

This product is of good quality and works as it should. I did drill a couple of holes in the base to allow water to drain but other than that, it is perfect. I always get good quality and wonderful service from etrailer.



by:

Good price and excellent quality. Just the height I needed for my application. Thanks for the quick ship too.

Doug J.

4/23/2015

Works great on race tracks with sloped pit areas.



by:

This footplate is well made and just what we were looking for. It worked great for our pop up trailer with no issues.



by:

To date this part has worked so much better than the one with a wheel. It is much more stable and secure while holding a 7500 lb. boat and trailer in place.



by:

Every aspect, from ordering product, customer service to delivery time went beyond my expectations; I will place orders for my future needs with George at etrailer.com!



by:

Perfect fit for my new 5000 pound-rated Bulldog jack. Item was actually zinc plated, and not cad plated as shown. Worked for me...perfect match for the zinc-colored jack! Thanks for the great service, guys!



by:

Have not installed the jack foot yet, but it appears to be good quality. Nice heavy gauge steel....as always, Etrailer is Great to deal with and a fast ship!


25
104
Show More Reviews

See what our Experts say about this Bulldog Accessories and Parts

  • What Finish is on the Bulldog Detachable Jack Footplate # BD018098
    According to our friends at Bulldog, the detachable footplate you mentioned, part # BD018098 features a zinc dichromate plating, that does indeed offer protection from corrosion.
    view full answer...
  • Recommended Footplate For Bulldog 5,000 Lb Jack With 2-1/4 Inch Diameter Outer Tube
    The Bulldog Detachable Footplate with Pin, part # BD018098, you referenced is designed for a 2,000 to 5,000 lb jacks with the inner 2 inch diameter tubing. The diameter of the outer tube on a 5,000 lb Bulldog jack like part # BD178101 is 2-1/4 inches, but the inside diameter of the tube where the footplate inserts should be 2 inches. The outside diameter of the footplate tube measures 2 inches. This # BD018098 footplate should work well for your jack with the 2-1/4 inch outside diameter...
    view full answer...
    Image 1 for
  • Which Mount For Bulldog Round Jack No Mount BD170205
    It sounds like you are looking for the Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin # BD500339 which gets welded to the trailer jack and has 4 holes allowing you to fold the jack up or down. The # BD500339 will need to get welded to the Bulldog Round Jack - No Mount - Sidewind - 15" Lift - 5,000 lbs # BD170205 you were looking at and will fit into the matching mount on your trailer. The # BD170205 does not include a foot plate or caster so you will also need...
    view full answer...
  • Recommended Versatile 1,500 Pound Foot Plate or Wheeled Trailer Jack
    Sounds like you are looking for a Bulldog Round Jack # BD170205. This jack has no mount or foot plate for the ultimate versatility. This jack has a lift capacity of 5,000lbs and a lift of 15 inches. You can buy the weld on mount # BD500339 and a foot plate # BD018098. or wheel # JC-102 to transform your standard jack to a rolling with the ease of just a snapper pin. I have linked a video for you to see just how easy it is. It's important to know that you will be limited by your lowest...
    view full answer...
  • Can The Foot Plate On The Round, Pipe Mount Swivel Jack # TJP-5002S-B Be Changed To a Wheel?
    The foot plate on the Round, Pipe Mount Swivel Jack # TJP-5002S-B is welded to the inner tube and cannot be replaced with a wheel unless you were to cut it off and weld on a wheel. We do have the Bulldog Round, Pipe-Mount Swivel Jack # BD1541150301 which will accept both a Wheel # BD500245 and Foot Plate # BD018098 if you want to be able to use either.
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Cole B
Installed by:
Cole B
Employee Thomas T
Installed by:
Thomas T
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.