This 2" diameter roller replaces one of your boat trailer's sideguiderollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 sideguideroller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Dimensions: 9" long x 2" diameter 9202-4 Yates 9" Molded SideGuideRoller - Black Rubber
This 2-1/2" diameter roller replaces one of your boat trailer's sideguiderollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 sideguideroller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 5/8" diameter shaft Dimensions: 12" long x 2-1/2" diameter 12243-5 Yates 12" Molded SideGuideRoller - Black Rubber
This 2-1/2" diameter x 2" wide endcap mounts to a sideguideroller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the sideguideroller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: sideguideroller on 1/2" diameter shaft Dimensions: 2-1/2" diameter x 2" wide Inner diameter of end cap: 0.610" Endcaps easily install on the same brackets that your sideguiderollers are mounted to.
This 2" diameter x 1-3/4" wide endcap mounts to a sideguideroller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the sideguideroller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: sideguideroller on 1/2" diameter shaft Dimensions: 2" diameter x 1-3/4" wide Endcaps easily install on the same brackets that your sideguiderollers are mounted to.
This 2-1/2" diameter roller replaces one of your boat trailer's guiderollers. Made of durable rubber material.Features: Replaces 1 sideguideroller on your boat trailer Eases loading and unloading of boat by helping to guide the boat into place Mounts along the side of your trailer Constructed of heavy-duty rubber Made in the USA Specs: Application: bracket with 1/2" shaft Dimensions: 12" long x 2-1/2" diameter
This 2-1/2" diameter x 2-1/2" wide endcap mounts to a sideguideroller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the sideguideroller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: sideguideroller on 5/8" outer diameter shaft Inner diameter: 0.670 Dimensions: 2-1/2" diameter x 2-1/2" wide Endcaps easily install on the same brackets that your sideguiderollers are mounted to.
This 2" diameter roller replaces one of your boat trailer's guiderollers. Made of durable rubber material.Features: Replaces 1 sideguideroller on your boat trailer (sold separately) Eases loading and unloading of boat by helping to guide the boat into place Mounts along the side of your trailer Constructed of heavy-duty rubber Made in the USA Specs: Application: bracket with 1/2" shaft Dimensions: 9" long x 2" diameter
Loading your fishing or jon boat at a busy ramp can be tricky, but this sideguideroller helps every time. Mounted along your trailer, it gently centers your boat for smooth loading, so you can skip the struggle and get off the water faster.Specs Application: Boat trailers sideguideroller position Fits bracket with 1/2" diameter shaft Dimensions: 12" long x 2-1/2" diameter Construction: Polyurethane construction
This 2-1/2" diameter roller replaces one of your boat trailer's sideguiderollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 sideguideroller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Dimensions: 12" long x 2-1/2" diameter 12243-4P Yates 12" Molded SideGuideRoller - Black Rubber
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. They fit trailer frames up to 3" wide x 4-1/4" tall.The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the rollers correctly matches the width of your boat. The rubber rollerguides help to center your boat during loading and to hold the boat during transport.
Dutton-Lainson guide-on roller for boat trailers.Features: Roller made of solid, high grade rubber 2-1/2" Diameter x 12" long guide-on roller Fits 5/8" shaft 21554 Boat Trailer Guide-On Roller, 2-1/2" Diameter x 12"Long Model 6334 by Dutton-Lainson
This Dutton-Lainson 2" diameter 9" long guide-on roller is for boat trailers.Features: Guide-on roller 2" x 9" Rollers made from solid, high grade rubber 2" Diameter x 9" guide-on roller Fits 1/2" shaft 21556 Boat Trailer Guide-On Roller, 2" Diameter x 9" Long model 6335 by Dutton-Lainson
Easily load your pontoon boat with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with endcaps. They fit trailer frames up to 3" wide x 4-1/4" tall. ... Features: Roller-style guides support your pontoon boat and keep it centered while you're loading it onto your trailer Adjustable height provides a good fit for your boat Support posts clamp onto the top of your channel, box-beam, or I-beam trailer frame Mounting brackets allow you to adjust the distance between posts Galvanized steel construction is sturdy and resists corrosion Hardware included Black rubber rollers with endcaps won't scratch your boat Made in the USA Specs: Quantity: 2 roller-style pontoon boat guides Application: pontoon boat trailer frames up to 3" wide x 4-1/4" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) can be used to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Roller length: 13" Length not including endcaps: 9" Distance above trailer frame: 25" (from bottom of roller to top of frame) Post dimensions: 23" tall x 1-1/2" wide Mounting area is 9-1/2" long Adjustable boat guides can be fine-tuned to work with your boat and your trailer.
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. ... Features: Channel-style roller bunks upgrade your boat trailer from standard bunk boards Ease boat loading and unloading - boat rolls smoothly over bunks Support hull during trailering Heavy-duty, black rubber rollers absorb road shock and protect hull from scratches 12 Gauge galvanized steel construction is sturdy and rust resistant Pre-assembled bunks easily install in either of 2 ways Mount to existing bunk boards (hardware not included) Attach to trailer frame with swivel mounting brackets (CE10003G-4 - sold separately), allowing for height and angle adjustment Made in the USA Specs: Quantity: 2 bunks with 6 rollers each Weight capacity: 1,500 lbs Bunk length: 5' Roller dimensions: 4-3/4" wide x 2-1/2" diameter Channel width: 2-1/8" Top of roller to bottom of channel: 2-13/16" CE Smith's roller bunks convert your boat trailer's guide-ons from bunk board style to roller style.
If your bow shifts off center during loading, it can contact the trailer. This 3-inch bow roller assembly cushions the bow and helps center the boat, with end bells for added protection so you can load with less contact.That guidance makes it easier to bring your boat into position and finish the approach centered on the trailer. Adjust the Guides Around Your Setup Guide placement matters when your boat and trailer leave limited room around the hull. Adjustable posts let you mount the guide-ons 5-11" on the side of the frame or 19" high when mounted above the frame, giving you options for positioning the bunk boards where they can guide your boat.
Zinc-plated steel U-bolt kit allows you to attach roller-, bunk-, or post-style guide-ons to your boat trailer with a frame up to 3" wide x 5-1/4" tall. Includes 2 sets of mounting U-bolts.Features: Extra-long U-bolts secures a bunk-style, roller-style or post-style guide-on to your boat trailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware is sold separately (8) 3/8"-16 Lock nuts (8) 3/8" Washers Includes 2 sets of mounting U-bolts Made in the USA Specs: Fits: trailer frames up to 3" wide x 5-1/4" tall Length: 6" Length of threads: 2-3/8" Bolt diameter: 3/8" Quantity: 2 sets (4 U-bolts)
Zinc-plated steel U-bolt kit allows you to attach 1 roller-, bunk-, or post-style guide-on to your boat trailer with a frame up to 3" wide x 4" tall. Includes 1 pair of mounting U-bolts and required mounting hardware.Features: Extra-long U-bolts secure 1 bunk-style, roller-style or post-style guide-on to your boat trailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware included Made in the USA Specs: Fits: trailer frames up to 3" wide x 4" tall Inside dimensions: 5" long x 3-1/2" wide Bolt diameter: 3/8" Quantity: 1 set (2 U-bolts) Included mounting hardware: (4) 3/8"-16 Lock nuts (4) 3/8" Washers
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. Ezi-Guides help you avoid loading your boat off the rollers and damaging it.Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 14' - 16' long and sailboats 16' - 20' long
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. Ezi-Guides help you avoid loading your boat off the rollers and damaging it.Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 16' - 20' long and sailboats 20' - 28' long Overall height: 15"
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. Ezi-Guides help you avoid loading your boat off the rollers and damaging it.Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 20' - 28' long
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. The bunk boards then tilt to conform to the boat's hull.
A worn bow roller can leave marks or let the bow contact the stand. This amber PVC assembly cushions contact and helps center the boat, with end bells adding side protection so you can load and transport with the bow supported.Helps Guide and Protect the Bow Keeping the bow centered can be harder when the contact point offers little guidance. The center roller helps guide your boat toward the intended position, while the end bells provide side protection to help keep the bow from scraping against the mounting bolts or roller bracket.
A worn bow roller can leave marks or let the bow contact the stand. This amber PVC assembly cushions contact and helps center the boat, with end bells adding side protection so you can load and transport with the bow supported.Highlights Protects Your Bow: Cushioned PVC roller surface reduces impact between your boat and trailer. Centers Your Boat: Roller assembly helps guide the bow into position during trailer loading.
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. ... Features: Channel-style roller bunks upgrade your boat trailer from standard bunk boards Ease boat loading and unloading - boat rolls smoothly over bunks Support hull during trailering Heavy-duty, black polypropylene rollers absorb road shock and protect hull from scratches Galvanized steel construction is sturdy and rust resistant Pre-assembled bunks easily install in either of 2 ways Mount to existing bunk boards (hardware not included) Attach to trailer frame with mounting brackets (CE10003G-4 - sold separately), allowing for height and angle adjustment Made in the USA Specs: Quantity: 2 bunks with 5 rollers each Weight capacity: 1,500 lbs Bunk length: 4' Roller dimensions: 4-3/4" wide x 2-1/2" diameter Channel width: 2-1/8" Top of roller to bottom of channel: 2-13/16" CE Smith's roller bunks convert your boat trailer's guide-ons from bunk board style to roller style.
Filters
