This tire change kit makes swapping out a flat on your multi-axle trailer a total breeze. Just drive the good tire up onto the leveler to raise the adjacent tire up to 4" off the ground. You will be back on the road in no time.Features: No Jack, No Problem: Just drive your good tire onto the mini jack and it lifts the flat one for you Strong and Mighty: Mini jack raises up to 4" and handles up to 30,000 lbs Essential Tools: Includes an extendable lug wrench, 2 reversible sockets, a Tuff Chock, and a carry bag Ideal for Multi-Axle Trailers: Can also be used as a leveler for single-axle trailers Made in the USA: Proudly manufactured in the United States Specs: Lifting height: 4" Socket sizes: 11/16", 3/4", 13/16", 7/8" Lug wrench extension: 14" to 21" Weight capacity: 30,000 lbs 1-Year limited warranty
... Waterproof, LED trailer light serves as either a side marker or a clearance light when properly mounted. Clear lens over amber LEDs. Surface mount to trailer. Self-grounding pigtail connector. P2/PC rated.Features: Rectangular LED mini trailer light functions as a clearance light or a side marker when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over amber LEDs Compatible with 12V DC electrical systems Surface mounts to trailer - hardware not included 9" Long pigtail is self-grounding DOT compliant P2 rated if mounted vertically PC rated if mounted horizontally Specs: Dimensions: 3-11/16" long x 13/16" wide x 3/4" thick Distance between mounting holes (center on center): 3" Diodes: 2 Power draw at 12.8V: 0.05 to 0.07 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Waterproof, LED trailer light serves as either a side marker or a clearance light when properly mounted. Clear lens over red LEDs. Surface mount to trailer. Self-grounding pigtail connector. P2/PC rated.Features: Rectangular LED mini trailer light functions as a clearance light or a side marker when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over red LEDs Compatible with 12V DC electrical systems Surface mounts to trailer - hardware not included 9" Long pigtail is self-grounding DOT compliant P2 rated if mounted vertically PC rated if mounted horizontally Specs: Dimensions: 3-11/16" long x 13/16" wide x 3/4" thick Distance between mounting holes (center on center): 3" Diodes: 2 Power draw at 12.8V: 0.05 to 0.07 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-1/2" x 1-1/4". Waterproof, LED trailer light functions as a clearance or side marker light when properly mounted. Durable polycarbonate housing and lens. Flush mount with grommet. Accepts standard 1-prong and 2-prong plugs. P2 rated.Features: Small, rectangular trailer light functions as a clearance or side marker light when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens over white LED Compatible with 12V DC systems Multiple mounting options Surface mount with open-back or self-grounding bracket (sold separately) Flush mount with grommet (A91GB - sold separately) Accepts industry-standard 2-prong plug (A46PB or A86PB - sold separately) Requires single-prong plug (sold separately) for installation with self-grounding bracket DOT compliant P2 rated Specs: Dimensions: 2-1/2" long x 1-1/4" wide x 1" thick Diodes: 1 Power draw at 12.8V: 0.023 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-1/2" x 1-3/16". Waterproof, trailer light functions as both a clearance and side marker light when properly mounted. Requires a mounting bracket and plug (both sold separately) for installation. Clear lens with Amber LEDs. PC rated.Features: Small, rectangular trailer light functions as both a clearance light and a side marker light when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens over amber LEDs Compatible with 12V DC systems Multiple mounting options Surface mount with open-back or self-grounding bracket (sold separately) Recessed mount with grommet (A91GB - sold separately) Accepts industry-standard 2-prong plug (A46PB or A86PB - sold separately) Requires single-prong plug (sold separately) for installation with self-grounding bracket DOT compliant PC rated Specs: Dimensions: 2-1/2" long x 1-3/16" wide x 7/8" deep Diodes: 3 Power draw at 12.8 volts: 0.051 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-1/2" x 1-1/4". Waterproof, LED trailer light functions as a clearance or side marker light when properly mounted. Durable polycarbonate housing and lens. Flush mount with grommet. Accepts standard 1-prong and 2-prong plugs. P2 rated.Features: Small, rectangular trailer light functions as a clearance or side marker light when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Amber lens over white LED Compatible with 12V DC systems Multiple mounting options Surface mount with open-back or self-grounding bracket (sold separately) Flush mount with grommet (A91GB - sold separately) Accepts industry-standard 2-prong plug (A46PB or A86PB - sold separately) Requires single-prong plug (sold separately) for installation with self-grounding bracket DOT compliant P2 rated Specs: Dimensions: 2-1/2" long x 1-1/4" wide x 1" thick Diodes: 1 Power draw at 12.8V: 0.023 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 3,000 lbs Axle capacity: 6,000 lbs Length from center of spring eye to center of spring eye (unloaded): 26" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 6 Additional dimensions: see table Part Number A B C D e94SR 13" 14" 26" 4-1/4" Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 3,500 lbs Axle capacity: 7,000 lbs Length from center of spring eye to center of spring eye (unloaded): 24-7/8" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 6 Additional dimensions: see table Part Number A B C D e64SR 12-7/16" 13-3/16" 24-7/8" 3-1/2" The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 1,000 lbs Axle capacity: 2,000 lbs Length from center of spring eye to center of spring eye (unloaded): 20-3/8" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 1/4" Number of leaves: 3 Additional dimensions: see table Part Number A B C D e84SR 10-3/16" 11" 20-3/8" 3-3/16" Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 12,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes rubber bushing with 1" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Rubber bushing included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Eye of spring attaches to hanger mounted on trailer frame Slipper end slides into hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 6,000 lbs Axle capacity: 12,000 lbs Length from center of spring eye to end of spring (unloaded): 30-1/2" Spring width: 3" Eye diameter with bushing: 1" Eye diameter without bushing: 2-1/16" Leaf thickness: 3/8" Number of leaves: 6 Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.Features: Incandescent trailer light kit comes with everything needed to properly light a trailer over 80" wide Includes 2 tail lights, 2 amber clearance lights, 2 reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware Sonically sealed, waterproof tail lights and clearance lights are submersible 2 Low-profile combination tail lights (ST16RB and ST17RB) Provide stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex functions Driver's-side light includes license illuminator 2 Amber clearance lights (MC91AB) Self-grounding chrome bases Gaskets for weathertight seal 2 Amber reflectors (RE11AB) meet FMVSS "A" for reflex when properly applied Durable polycarbonate housing on all lights Compatible with 12V DC systems Simple installation with included mounting bracket (LP5SB) and stainless steel mounting hardware Tail lights stud mount to trailer Clearance lights surface mount to trailer Reflectors screw-mount to trailer or attach with adhesive backing 25' Wiring harness with 4-pole connector DOT approved PC rated Specs: Application: trailers over 80" wide Tail light dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Distance between mounting holes (center on center): 2" Clearance light dimensions: 2-7/8" long x 1-1/2" wide x 1" thick Reflector dimensions: 4-7/16" long x 1-15/16" wide Distance between mounting holes (center on center): 3-15/16" Power draw at 12V: Tail lights: Stop/turn: 2.3 amps Tail: 0.9 amps Clearance lights: 0.2 amps Limited 3-year warranty Note: Over 80" Federal Regulations require additional clearance lights (like MC94RB, sold separately) Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
3-15/16" x 1-1/4". Waterproof, LED trailer light serves as either a side marker light or clearance light. Durable polycarbonate housing and lens. Multiple mounting options. Accepts standard 1-prong or 2-prong plugs. P2 rated.Features: LED trailer light functions as a clearance light or side marker light when properly mounted Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC systems Multiple mounting options Surface mount with open-back or self-grounding bracket (sold separately) Accepts industry standard 1-prong and 2-prong plugs P2 rated Specs: Dimensions: 3-15/16" long x 1-1/4" tall x 7/8" deep Mounting holes: 3" apart on center Diodes: 4 Power draw at 12.8V: 0.06 amps Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 19250R Grote # 47492 Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-1/2" Diameter round. Waterproof, LED trailer light serves as either a side marker light or clearance light. Built-in reflex reflector. Durable polycarbonate housing and lens. Multiple mounting options. Accepts standard 2-prong plug. P2 rated.Features: Round LED trailer light functions as a clearance light or side marker light when properly mounted Built-in reflex reflector removes the need for a separate reflector Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC systems Multiple mounting options Surface mount with open-back or self-grounding bracket (sold separately) Recessed mount with grommet (A55GB - sold separately) Accepts industry standard 2-prong plug DOT compliant P2 rated Specs: Dimensions: 2-1/2" diameter x 1-1/16" thick Diodes: 8 Power draw at 12.8V: 0.047 amps Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 10208R Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, and side reflex. Stud mount on 2" centers. 2-Wire self-grounding design with 15" leads.Features: Square combination trailer tail light serves 6 functions Stop light, turn signal light, tail light, rear reflex marker, side marker light, and side reflex reflector Built-in reflex reflector removes the need for a separate reflector Sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing and durable acrylic lens Red lens over white LEDs Stud mount with included hardware 2-Wire pigtail hardwires with 15" leads Self-grounding design grounds through hardware Specs: Configuration: passenger's side Driver's side: STL9RGB (sold separately) Dimensions: 5-1/4" wide x 4-3/4quot; tall x 2-11/16" deep Light face: 4-3/4" wide x 4-3/4" tall Distance between mounting studs (center on center): 2" Diodes: 11 Power draw at 12.8V: Stop light: 0.259 amps Side marker light: 0.062 amps Wire length: 15" Lifetime warranty on LEDs
... Waterproof trailer light serves 7 functions: stop, turn, tail, rear reflex, side marker, side reflex, and license plate light. Stud mount on 2" centers. 2-Wire self-grounding design with 15" leads.Features: Square combination trailer tail light serves 7 functions Stop light, turn signal light, tail light, rear reflex marker, side marker light, side reflex reflector, and license plate illuminator Built-in reflex reflector removes the need for a separate reflector Sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing and durable acrylic lens Red lens over white LEDs Stud mount with included hardware 2-Wire pigtail hardwires with 15" leads Self-grounding design grounds through hardware Specs: Configuration: driver's side Passenger's side: STL8RGB (sold separately) Dimensions: 5-1/4" wide x 4-3/4quot; tall x 2-11/16" deep Light face: 4-3/4" wide x 4-3/4" tall Distance between mounting studs (center on center): 2" Diodes: 14 Power draw at 12.8V: Stop light: 0.259 amps Side marker light: 0.062 amps Wire length: 15" Lifetime warranty on LEDs
Double-eye slipper leaf spring acts as part of your trailer's Hutchens or Dexter HDSS suspension system by providing an attachment point for a 22,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Designed for use with 9600 - 9700 Series Hutch trailer suspension systems or the Dexter HDSS suspension system Specs: Quantity: 1 leaf spring Spring capacity: 11,250 lbs Axle capacity: 22,500 lbs Overall length: 44-1/8" Length from top of radius curve to top of hook curve (unloaded): 41-1/2" Spring width: 3" Leaf thickness: 7/8" Number of leaves: 3 Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
... Sealed polycarbonate housing and lens meets IP67 ingress protection level. 11 Diodes.Features: Rectangle LED trailer light acts as a turn signal when properly mounted LEDs make great replacements for incandescent lights Rated for up to 100,000 hours of operation More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Sealed polycarbonate housing and lens meets IP67 ingress protection level Amber lens over white LEDs Potted, hardwired terminals Compatible with 12V and 24V DC systems Meets FMVSS 108 requirements Specs: Dimensions: 5-5/16" diameter x 3-7/16" thick Fits 5-1/2" wide x 3-9/16" tall grommet hole Diodes: 11 Operating range: 9V - 32V Limited lifetime warranty
2-1/2" x 1-3/16" Rectangle. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Requires mounting bracket and plug (both sold separately) for installation. Amber lens. PC rated.Features: Small, rectangular trailer light functions as both a clearance light and a side marker light when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Amber lens Multiple mounting options Surface mount with open-back or self-grounding bracket (sold separately) Recessed mount with grommet (sold separately) Accepts industry-standard 2-prong plug (sold separately) Requires single-prong plug (sold separately) for installation with self-grounding bracket DOT compliant PC rated Specs: Dimensions: 2-1/2" long x 1-3/16" wide x 7/8" deep Diodes: 3 Power draw at 12.8 volts: 0.051 amps Lifetime warranty on LEDs Trailer light is a direct replacement for: Uni Bond LED1225-3A Truck Lite 15250Y Grote 47083 Peterson M153A Maxxima M20320Y Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Filters
