Twist the vent to direct fresh filtered air where you want it to keep things comfy. The washable foam filter ensures you have clean air blowing through your RV. Installs with hidden fasteners in 5" duct openings - hardware included.
Hey Ron! The etrailer Solar Expansion Kit #e72PR will work just as well as the #34282182 on your Jayco. There are a few differences in the specs but they're close enough it doesn't make a difference for this kind of setup. It is ok to mix…
The tongue jack only supports the tongue so it won't need to be rated for the full weight of the trailer. The tongue weight is typically 10-15% of the gross weight. For example, for a 7,000 lb trailer you need at most a jack rated for 1,050 lbs.…
When choosing an A-frame jack, you will just need to make sure that it has the capacity to lift the trailer's tongue weight. The tongue weight should be around 10 to 15 percent of its total weight. Using the 7,000 pound loaded weight that you…
The center hole required for the Buyers Products 30 Ton Heavy-Duty Swivel Type Pintle Hook #337BP760A needs to be 2-1/16". I have attached a picture below of the mounting plate dimensions and hole placement.
Depending on how thick the boards are that you plan to install in your trailer the 1-1/2" Long Torx Floor Screws #TF01150 could work well. The screws are 1-1/2 inches long and are 1/4 inch in diameter. If the depth of where the screws can attach…
Hello again Allen; for a Dometic Brisk Air Duo Therm replacement we have AC units from Furrion and Dometic. I personally prefer the Furrion since I have one on my trailer and really like it how well it performs. You can choose from the following:…
There isn't a gauge requirement for the thermostat wiring of the Furrion Chill RV AC units like the part #FR92PR but it's not a circuit that carries a lot of amperage so a 14-gauge wire would work well.
Kevin, that’s exactly what these PingMaster trailer trackers are built for. All three models - the PingMaster 3000 w/ WiFi Backup #PM84FR and both PingMaster 5000 versions #PM64FR and #PM74FR - use motion-sensing alerts that notify you the moment the…
The only tank equipped RV water heat option we currently offer is the Dometic RV Water Heater part #DMC74FR which is a 120 volt unit with 6 gallon tank and gas/electric operation. In regards to installation, this must be performed by a qualified…
Hi Rick, LaSalle Bristol's roof membrane is made of PVC which is known to be durable and offer better protection against punctures and overall weathering. Alpha Systems offers TPO roof membranes that are more environmentally friendly/recyclable…
Hey Bob! Yes, the etrailer Solar Expansion Kit #e72PR can be used to add another solar panel to your Go Power Overlander #34282181 setup. You will also need the etrailer MC4 Expansion Branches #e92PR to hook up both panels. Are you installing this…
Replace a damaged plumbing vent on your RV with this original factory replacement. Includes screws and putty for a leak-proof installation. Polar white color complements your RV.Features: Installation kit provides everything you need to replace your RV's plumbing vent Putty tape creates a seal between the vent and your RV roof Fits 1" to 2-3/8" pipe (outside diameter) 6 Screws included Polar white color complements your RV 40033 Camco Motor Home Replacement Plumbing Vent with Putty and Screws - Polar White
This 93-1/2" long section of corner screw cove trim covers screws, cracks, and cut edges around the cabinets in your enclosed trailer. Aluminum is sturdy and lightweight. Trim can be cut to fit your specific application.Features: Corner screw cove trim conceals screws, cracks, and cut edges around the cabinets in your enclosed trailer Aluminum construction is sturdy and lightweight Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 7/8" tall x 3/8" deep Made in the USA
This 93-1/2" long section of corner screw cove trim covers screws, cracks, and cut edges around the cabinets in your enclosed trailer. Aluminum is sturdy and lightweight. Trim can be cut to fit your specific application.Specs: Dimensions: 93-1/2" long x 1-1/2" tall x 1-1/2" deep Angle: 100 degrees Features: Corner screw cove trim conceals screws, cracks, and cut edges around the cabinets in your enclosed trailer Aluminum construction is sturdy and lightweight Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Made in the USA
... Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.Features: Red trailer reflector meets FMVSS requirements for reflex reflector Durable acrylic construction Self adhesive backing allows for easy stick-on application Screw holes allow for surface mounting DOT compliant Specs: Dimensions: 4-7/16" long x 1-15/16" wide x 5/16" thick Distance between mount holes (center on center): 3-15/16" 3-Year warranty Manufacturer Cross Reference Reflector will work as an exact replacement for: Uni Bond # RF2421R Truck Lite # 98032R3 Grote # 41032 Peterson # B480R
... Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. Meets FMVSS requirements.Features: Amber trailer reflector enhances visibility on the road Durable acrylic construction Adhesive backing allows for easy stick-on application Screw holes allow for surface mounting - hardware not included Meets FMVSS 108 when properly applied Specs: Dimensions: 4-3/8" long x 1-15/16" wide Distance between mount holes (center on center): 4-5/16" 1-Year limited warranty
This threaded oil cap keeps dust out of your 8K oil-bath hub and lets you check fluid through the clear lens. Magnetic vent plug catches metal shavings and the side port makes filling or draining easy. Includes O-ring and rubber plug.
... Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.Features: Amber trailer reflector meets FMVSS requirements for reflex reflector Durable acrylic construction Self adhesive backing allows for easy stick-on application Screw holes allow for surface mounting DOT compliant Specs: Dimensions: 4-7/16" long x 1-15/16" wide x 5/16" thick Distance between mount holes (center on center): 3-15/16" 3-Year warranty Manufacturer Cross Reference Reflector will work as an exact replacement for: Uni Bond # RF2421A Truck Lite # 98032Y3 Grote # 41033 Peterson # B480A
2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.Features: Round amber trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly installed Specs: Dimensions: 2-3/16" diameter 3-Year warranty
3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.Features: Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly installed Specs: Dimensions: 3-3/16" diameter 3-Year warranty
2-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.Features: Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly installed Specs: Dimensions: 2-3/16" diameter 3-Year warranty
... Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. Meets FMVSS requirements.Features: Red trailer reflector enhances visibility on the road Durable acrylic construction Adhesive backing allows for easy stick-on application Screw holes allow for surface mounting - hardware not included Meets FMVSS 108 when properly applied Specs: Dimensions: 4-3/8" long x 1-15/16" wide Distance between mount holes (center on center): 4-5/16" 1-Year limited warranty
Adds a reflector to your trailer so you can tow safely and legally.Features: Circular reflector Red Center screw mounting 1/4" Diameter DOT compliant Meets FMVSS 108 requirements Dimensions: 2-3/8" diameter
Filters
