Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I do have an option for you but unfortunately there is not a fabric conditioner available for the Camco UltraGuard 5th Wheel Cover part #CAM45757 or any other brand. Even if there was a fabric conditioner available it would most likely still become…
view full answer...The reason your #290-64844 seems a little big is because the measurement you took included the length added by the rear spare tire. The cover manufacturers recommend measuring the box length not including the coupler portion up front and the spare or…
view full answer...The 275/70-R19.5 tires your customer has have an overall diameter of 34.7". This will need to be the measurement you use to determine the correct size wheel cover. With that being said, the Adco Ultra Tyre Gard RV Wheel Covers part #290-3955 are…
view full answer...The reason that you cannot find a list of all load ranges and the weight capacity for each in regards to trailer tires is because it will be different for each size. For example, a 205/75-15 tire like part #AM10245 which has a load range D rating is…
view full answer...The Replacement 12-Volt DC Fan Motor, #BVD0218-00, is a replacement for specific Ventline Ventadome or Vanair RV roof vents. The specific model numbers are V2094, V2119 and VP-543. If you have a different model this motor will not be compatible. The…
view full answer...The Ventline product you reviewed, part #V2092SP-28, is a complete vent assembly intended for a rough roof opening of 14-1/4 x 14-1/4 inches. It consists of a wedge-shaped white plastic dome attached to a galvanized steel frame with hand-crank…
view full answer...The correct replacement motor you would need for your V2094 Vent is the part #BVD0218-00 that you referenced. Based on what you described it sounds like you may have damaged the old motor when you attempted to clean it.
view full answer...A typical RV entry door gas strut ranges from 10-20lbs in pressure. We carry both a 10lbs #372-5300-10 and 20lbs #372-5300-20 that you can use. Really it just comes down to preference and the climate. If you're in a windy climate going heavier…
view full answer...For a 5th Wheel Tailgate like #VGD-10-4000, I recommend the Rear View Safety Backup Camera System with Flush Mount Camera #RVS-7707721 or the Rear View Safety Backup Camera System - Mirror with Monitor #RVS-772718 with this same camera. This is one…
view full answer...For a 14,000 lb trailer, you'll need a Fastway ball mount for a 2-1/2 inch hitch receiver, as the highest capacity of their ball mounts for a 2 inch receiver is 10,000 lbs. So if you have a 2-1/2 inch receiver, you can use any of the following,…
view full answer...The 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mount #358CLEVIS has a spread of 2-1/2" between the tangs. You would also need the BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch #BPH64FR. The combination of this clevis…
view full answer...If you don't know the key number for the current lock on your Flash E Series Adjustable 2-Ball Mount #FA42-00-2600 and the previous owner doesn't know the number, you can still use the ball mount but you will need to get the current lock cut…
view full answer...Filter Your Search
Contact and Help