Steep ramps can make launches tricky. Black rubberrollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.Those brackets allow the top plate to pivot, giving you the ability to angle the bunks so they contour more closely to your hull. This adjustment helps distribute weight evenly across the rollers and makes loading more predictable, especially for boats with deeper or more angled hulls. Specs Quantity 2 bunks with 6 rollers each Dimensions & Weight Bunk length: 5' Weight: 37.36 lbs Material Rollers: black rubber Frame: galvanized steel General Warranty: 1-year limited Made in the USA
Steep ramps can make launches tricky. Black rubberrollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.Those brackets allow the top plate to pivot, giving you the ability to angle the bunks so they contour more closely to your hull. This adjustment helps distribute weight evenly across the rollers and makes loading more predictable, especially for boats with deeper or more angled hulls. Specs Quantity 2 bunks with 5 rollers each Dimensions & Weight Bunk length: 4' Weight: 30.64 lbs Material Rollers: black rubber Frame: galvanized steel General Warranty: 1-year limited Made in the USA
This 3-1/2" diameter x 1-1/4" wide endcap mounts to a keel roller, spool roller or bow roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers sturdy support.Features: Attaches to the end of the roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra support and guiding capability Works with keel, spool and bow rollers Constructed of heavy-duty rubber Made in USA Specs: Application: keel, spool or bow roller on 5/8" diameter shaft Dimensions: 3-1/2" diameter x 1-1/4" wide Endcaps easily install on the same brackets that your keel, spool or bow rollers are mounted to.
3" Wide wobble rollers replace the worn-out rollers on your boat trailer's roller bunk. Ribbing provides extra traction for slippery hulls. Includes bushings for 3/4" or 1-1/8" diameter shaft on roller bunk.Features: Replaces 4 wobble rollers on the roller bunk assembly of your boat trailer Direct replacement for OEM rollers on LoadRite, Sealion, Venture, Calkins, Hawkeye, Karavan, and King Marine boat trailers Supports your boat, eases loading and unloading, and absorbs road shock during trailering Provides additional traction thanks to ribbed design Great for slick or slimy hulls Removable bushings ensure that rollers fit 3/4" and 1-1/8" diameter shafts Constructed of sturdy rubber with polypropylene plastic hubs Made in the USA Specs: Fits 3/4" and 1-1/8" roller shafts Roller dimensions: 5" diameter x 3" wide Inside hub width: 1-1/2"
This 3" diameter x 1-1/4" wide endcap mounts to a keel roller, spool roller or bow roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers sturdy support.Features: Attaches to the end of the roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra support and guiding capability Works with keel, spool and bow rollers Constructed of heavy-duty rubber Made in USA Specs: Application: keel, spool or bow roller on 1/2" diameter shaft Dimensions: 3" diameter x 1-1/4" wide Endcaps easily install on the same brackets that your keel, spool or bow rollers are mounted to.
This 2-1/2" diameter x 2" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the side guide roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: side guide roller on 1/2" diameter shaft Dimensions: 2-1/2" diameter x 2" wide Inner diameter of end cap: 0.610" Endcaps easily install on the same brackets that your side guide rollers are mounted to.
This 3-1/2" diameter x 1-1/4" wide endcap mounts to a keel roller, spool roller or bow roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers sturdy support.Features: Attaches to the end of the roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra support and guiding capability Works with keel, spool and bow rollers Constructed of heavy-duty rubber Made in USA Specs: Application: keel, spool or bow roller on 1/2" diameter shaft Dimensions: 3-1/2" diameter x 1-1/4" wide Endcaps easily install on the same brackets that your keel, spool or bow rollers are mounted to.
This 2" diameter x 1-3/4" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the side guide roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: side guide roller on 1/2" diameter shaft Dimensions: 2" diameter x 1-3/4" wide Endcaps easily install on the same brackets that your side guide rollers are mounted to.
This 2-1/2" diameter x 2-1/2" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the side guide roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: side guide roller on 5/8" outer diameter shaft Inner diameter: 0.670 Dimensions: 2-1/2" diameter x 2-1/2" wide Endcaps easily install on the same brackets that your side guide rollers are mounted to.
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 12-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boat trailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubberroller delivers long-lasting performance Made in the USA Specs: Roller length: 12" Shaft diameter: 5/8" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 10" apart on center Typically installed upright on the rear and middle crossmembers of a boat trailer, keel roller panel bracket assemblies help to keep the boat moving while it is being loaded and to stabilize the keel.
Replace the worn-out roller on your boat trailer with this heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 8" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Made in USA Specs: Application: 8" wide bracket with 5/8" diameter shaft Dimensions: 7-3/4" long x 3-3/8" diameter 8000 Yates 8" Heavy-Duty Keel Roller - Black Rubber
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 5-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boat trailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubberroller delivers long-lasting performance Made in the USA Specs: Roller length: 5" Shaft diameter: 5/8" Dimensions of mounting slots: 9/16" wide x 5" tall Spacing of mounting slots: 3" apart on center Typically installed upright on the rear and middle crossmembers of a boat trailer, keel roller panel bracket assemblies help to keep the boat moving while it is being loaded and to stabilize the keel.
Replace the worn-out roller on your boat trailer with this large-diameter, heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 12" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Includes heavy-duty nylon bushings Made in USA Specs: Application: 12" wide bracket with 5/8" diameter shaft Dimensions: 11-3/4" long x 3-3/4" diameter 12244-125EC Yates 12" Super Heavy-Duty Keel Roller - Black Rubber
This 2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Dimensions: 9" long x 2" diameter 9202-4 Yates 9" Molded Side Guide Roller - Black Rubber
Replace the worn-out roller on your boat trailer with this large-diameter, heavy-duty rubber one. This V-shaped keel roller functions as a direct replacement for rollers that fit standard 5" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer V-shape offers extra support for deep hulls Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Made in USA Specs: Application: 5" wide bracket with 5/8" diameter shaft Dimensions: 5" long x 3" diameter 5213-5 Yates 5" Super Heavy-Duty V Keel Roller - Black Rubber
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 4-inch, black rubber spool roller and a galvanized steel bracket that attaches to your trailer's tongue.Features: Spool roller supports your boat's keel as it sits on the trailer Prevents the bow from making contact with your winch Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Bracket lets you bolt roller assembly onto the tongue or frame of your boat trailer Requires 7/16" fasteners (not included) Sturdy, 1/8" galvanized steel bracket resists corrosion Black rubberroller delivers long-lasting performance Made in the USA Specs: Roller length: 4" Shaft diameter: 5/8" Diameter of mounting holes (each): 7/16" Spacing of mounting holes: 3" apart on center Typically installed flat on the tongue of a boat trailer, this spool roller bracket assembly stabilizes the keel of the boat during trailering.
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features an 8-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boat trailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubberroller delivers long-lasting performance Made in the USA Specs: Roller length: 8" Shaft diameter: 5/8" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 6" apart on center Typically installed upright on the rear and middle crossmembers of a boat trailer, keel roller panel bracket assemblies help to keep the boat moving while it is being loaded and to stabilize the keel.
Replace the worn-out roller on your boat trailer with this heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 12" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Made in the USA Specs: Application: 12" wide bracket with 5/8" diameter shaft Dimensions: 11-3/4" long x 3-3/8" diameter 12000 Yates 12" Heavy-Duty Keel Roller - Black Rubber
Replace the worn-out roller on your boat trailer with this heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 10" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Made in USA Specs: Application: 10" wide bracket with 5/8" diameter shaft Dimensions: 9-5/16" long x 3-3/8" diameter
Replace the worn-out roller on your boat trailer with this heavy-duty rubber one. This bow roller functions as a direct replacement for rollers that fit standard 3" wide brackets with a 1/2" diameter shaft.Features: Replaces 1 bow roller on your boat trailer Eases loading and unloading of boat Supports front of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Made in USA Specs: Application: 3" wide bracket with 1/2" diameter shaft Dimensions: 3" long x 3" diameter 3143-4 Yates 3" Bow Roller - Black Rubber Replaces Dutton-Lainson DL21730
Replace the worn-out roller on your boat trailer with this large-diameter, heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 18" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Includes heavy-duty nylon bushings Made in USA Specs: Application: 18" wide bracket with 5/8" diameter shaft Dimensions: 17-1/4" long x 3-3/4" diameter 18244-165EC Yates 18" Super Heavy-Duty Keel Roller - Black Rubber
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 10-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boat trailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubberroller delivers long-lasting performance Made in the USA Specs: Roller length: 9-1/4" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 8" apart on center Typically installed upright on the rear and middle crossmembers of a boat trailer, keel roller panel bracket assemblies to keep the boat moving while it is being loaded and to stabilize the keel.
3" Wide wobble roller replaces 1 worn-out roller on your boat trailer's roller bunk. Heavy-duty rubber construction delivers sturdy support. Ribbing provides extra traction for slippery hulls.Features: Replaces 1 wobble or rocker roller on the roller bunk assembly of your boat trailer Provides additional traction thanks to ribbed design Great for slick or slimy hulls Constructed of heavy-duty rubber Made in the USA Specs: Application: roller bunk with 1" diameter shaft Diameter of center hole measures slightly under 1-1/8" to fit 1" shaft Dimensions: 5" diameter x 3" wide Bushing length: 1-1/2" 530R-8P Yates 5" Rib Rocker Roller - Black Rubber
Replace the worn-out roller on your boat trailer with this large-diameter, heavy-duty rubber one. This V-shaped keel roller functions as a direct replacement for rollers that fit standard 5" wide brackets with a 1/2" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer V-shape offers extra support for deep hulls Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Made in USA Specs: Application: 5" wide bracket with 1/2" diameter shaft Dimensions: 5" long x 3" diameter
Filters
