Fight back against trailer thieves with this rugged, rustproof aluminum trailer coupler lock. Simple yet effective, it deters towaway theft of your trailer that has a Bulldog Collar-Lok coupler. Includes stainless steel padlock.
Fight back against trailer thieves with this rugged, rustproof aluminum trailer coupler lock. Simple yet effective, it deters towaway theft of your trailer that has a trigger-, latch-, or handwheel-style coupler. Includes stainless steel padlock.
The patented, adjustable Python cable lock secures your gear at the best position for your needs. Made of vinyl-covered, braided steel, the cable resists cutting and rust.
This heavy-duty padlock boasts a laminated steel casing, a hardened steel shackle, and steel tumblers. The lock resists drilling and picking, and the dual locking levers make it tough to pry. Can be keyed alike to match other ML1KA padlocks.
Keep your trailer safe from towaway theft with this universal coupler lock. Its tough frame fits in and around most 1-7/8", 2", and 2-5/16" ball couplers; and it has a bright red color and heavy-duty construction to deter theft.
Hey Greg! Where did your Stromberg Carlson Base Pad Extreme #SC53VR crack? The Andersen Trailer Jack Block #AN39VR is a good alternative. It has the same 6,000 lb capacity and the design is a little more basic/straightforward which makes it less…
The correct bearing kit for a Dexter 4,400 lbs axle is item #BK2-100. The Dexter 4,400 lbs axles use the same bearings and seals as a Lippert 3,500 lbs axles. This kit includes inner bearing item #L68149, inner race item #L68111, outer bearing item…
Unfortunately, Michael I cannot find any information on an AL-KO 7170 trailer hub. I would need for you to see what size bearings your hub uses and send me some images along with dimensions to identify the bolt pattern and any side brakes it may use…
The correct replacement we offer for an AL-KO 568182 or Hayes 09089324 is the Trailer Hub and Drum Assembly part #AKHD-865-7-1-EZ-K which will work with the EZ-Lube Spindles (Dexter) and UltraLube (AL-KO). I can confirm the above will fit an AL-KO…
Hello Kevin, thanks for reaching out. Since you have already driven with these brakes a lot, the shoes should be properly seated to the drum. New breaks do need to be broken in to get full braking power. This is usually done by speeding the truck up…
First thing I'd check is to see if the spindle nut is on too tight. If the brakes are tensioned properly and there's still more drag on one when than the other most likely somebody tightened the spindle nut too much. The spindle nut needs to…
The traditional wire colors for brake controller installation are white for ground, black for 12 volt power, red for stoplight switch, and blue for brake output. For more information on wiring in a brake controller check out the help article I…
Hi Rob! The Bulldog Lifelong Trigger-Style Coupler Lock and 2" Trailer Hitch Receiver Lock - Chrome #BD580404 cannot have multiple set be keyed alike, unfortunately. If you are open to a different option though, the Trimax 2" Hitch Receiver…
Wheels with a 4 on 4.5 bolt pattern are typically found on old passenger vehicles. We have found at least one instance where they were on old trailer from the 60's, but in general that is not a bolt pattern found on trailer wheels. Since these…
We do have all the parts you will need but at this time we do not have a kit that contains all the correct bearings for your 2020 Grand Design Reflection 150 Series 260RD 5th wheel. I will list the quantity needed for your 4 hubs as some contain…
I spoke with my contact at BoatBuckle and they informed me that the bolt that comes with the Winch Strap part #IMF05848 that you referenced measures 2-3/4 inches in length by 1/4 inch in diameter. We do not carry this bolt as a replacement part but…
From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…
Convenient kit includes a flush-design, stainless steel trailer hitch receiver lock with an easy-to-use swivel head and a stainless steel latch lock for your trailer's coupler. Fits 2" x 2" hitches.
Innovative swivel head and solid stainless steel construction make this flush-design hitch lock a great choice for securing your ball mount, bike rack or cargo carrier to your 2" hitch receiver.
Heavy-duty, stainless steel lock provides superior security when locking your trigger-latch-style trailer coupler. Third-party-tested pin has a 42,000-lb shear strength.
Heavy-duty, stainless steel lock provides superior security when locking your cast Demco eZ-Latch trailer coupler or gooseneck coupler ball. Third-party-tested pin has a 42,000-lb shear strength.
Filters
