Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Rick, I’m happy to help. Based on your trailer having 4,400 lb Dexter axles, the bearing kit #DX86ER is what you would need for your trailer. This is the only bearing kit available for a 4,400 lb Dexter axle. What kind of trip are you prepping…
view full answer...Hey David, thanks for the detailed information. For pn 57920 Dexter 5,200 lbs axles you'll need the Bearing Kit item #BK3-300. This kit includes inner/outer bearings, races, grease seal, and cotter pin. They're sold individually so you'll…
view full answer...Hey Ryan. We only have one hub that'll fit a straight spindle with 1-3/8" item #L68149 inner and outer bearings. It's the Dexter 9-3/4" Hub-and-Rotor Assembly item #DX82UR. This zinc coated hub and rotor assembly has a 5 on…
view full answer...Hi Jeff; I'm assuming you were able to identify the parts based on the axle tag or by pulling off the hubs and measuring. Did you verify that the grease seal had a 2.25" inner diameter? The #AKIHUB-655-6-EZ-K comes with a 2.25" ID…
view full answer...Hey Jarrett, thanks for the information! To replace your hubs, bearings, and brake assemblies you'll need the following parts: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2 item #8-201-5UC3-EZ - Sold…
view full answer...The short answer is Yes, bearing #15123 is slightly larger and stronger than #LM67048 and they use different races which means they are not interchangeable. Bearing 15123 uses race #15245 which has an outer diameter of 2.441 inches and bearing…
view full answer...Though we do have the replacement bearings, races, and seals available for your Hadco 3109 hub (which I have listed below), the combination used will not have an equivalent replacement hub available, unfortunately. Replacement Trailer Hub Bearing…
view full answer...You can check the condition of your hub's races by carefully removing all bearing grease with a rag to expose the actual surface of the races. When they are completely free of grease, etc., inspect them for any signs of scoring (very slight…
view full answer...The etrailer.com Electric Trailer Brake Kit #AKEBRK-7-SA and the Dexter Nev-R-Adjust Electric Brake Kit # 23-464-465 referenced in your question are both self-adjusting assemblies that will work to replace the existing Dexter brakes on your 7,000…
view full answer...For a Lippert 4,400 lb trailer axle the correct bearing kit is the part #BK2-100 which includes inner bearing #L68149, inner race #L68111, outer bearing #L44649, outer race #L44610, grease seal #58846, a cotter pin and a tang washer.
view full answer...The Replacement Control Module for Lippert Electric Coach Step #LC301702 has the purple wire that connects to the door light switch. The other end of the switch #LC301694 connects to the Replacement Wiring Harness for Lippert Electric Coach Step…
view full answer...Yes, going from a 4 leaf to a 6 leaf spring would add slightly to your ride height. For example, if the current 4 leaf spring has 3/8" thick leaves, and you go to a 6 leaf spring with 3/8" thick leaves, you would be adding 3/4" of…
view full answer...