Replaces the gears and roll pins on your etrailer or Ram square, direct-weld, sidewind jack with a 5,000-lb or 7,000-lb capacity. Designed for TJD-5000S and TJD-7000S Series jacks.Features: Replacement gears and roll pins work with etrailer and Ram square, direct-weld, sidewind jacks that have a 5,000-lb or 7,000-lb capacity Designed for use with Ram TJD-5000S and TJD-7000S
8-11/16" Low-profile, LED tail light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome, with a lens that snaps on so it's ...
8-3/8" x 5-3/4" Low-profile, LED tail light displays brake, tail, and turn signals on your RV. It comes with a built-in reflector. It mounts on the surface of the motorhome and hardwires ...
5-15/16" Low-profile RV light displays brake, tail, and turn signals on the passenger side. It mounts on the surface of your motorhome and hardwires to the RV with the 3-wire pigtail.
7" Diameter. Low-profile dome light illuminates your RV's interior with bright white light. Low-voltage cutoff prevents battery drain. Surface mount with built-in flange. 2-Wire pigtail with 0.18 male bullets. 39 Diodes. Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LEDs are capable of producing. It does
7-1/2" x 3-11/16" Rectangle. Low-profile LED driver side RV light functions as a stop, turn, tail, and license plate light. Built-in reflex reflector. Durable polycarbonate housing. Surface ... Features: Low-profile RV tail light provides stop, turn, tail, and license plate functions for driver-side applications Built-in reflex reflector removes the need for a separate reflector Sonically
7-1/2" Low-profile, LED tail light displays brake, tail, and turn signals on the passenger side. It has a built-in reflex reflector. It mounts to the surface of the motorhome and wires into the ...
Add a sleek and compliant red ID light to your trailer with this low-profile, surface-mount design. It installs with two screws and helps meet FMVSS 108 lighting standards.Features: Meets FMVSS 108 identification light requirements for vehicles over 80" wide Ultra-thin design (1/2" deep) minimizes protrusion for a sleek profile Clear lens with red LEDs
4-5/16" x 2" Oblong. Low profile LED light illuminates your RV or trailer's exterior with bright white light at a downward angle. Durable die-cast aluminum housing and polycarbonate ... Features: Low-profile, exterior light provides bright white light for your RV or trailer's exterior Flood beam illuminates a wide area Light emits at 45-degree angle making it great for
7-9/16" x 3-5/16" Oval low-profile lens. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Surface mount with built-in flange. Accepts industry standard PL-3 plug. that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit
From docking lights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.TecNiq's Stop Tail Turn Light is a quality waterproof lamp that can be mounted in unique locations where space is at a premium. Features: Powered by 11 LEDs Hermetic seal for dust and
5-5/8" x 3-1/8" Rectangle. Low-profile LED utility light illuminates an area with warm white light. Durable white polycarbonate base and screw-on acrylic lens. Mounts on surface of trailer - hardware not included. 2-wire pigtail. 12 Diodes. Compatible with 12V DC systems Surface mount to trailer - hardware not included Included foam gasket helps create a weathertight seal 2-Wire pigtail includes power lead and ground wire Assembled in the USA
4-1/2" x 3-3/4" Oval. Low-profile trailer reflector increases visibility of vehicle in low lighting. Durable aluminum housing. Surface mount to trailer - hardware not included.
Low profile LED trailer light with 8 diodes serves 7 functions: stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex. Durable plastic housing. Stud mount on 2" centers. 3-Wire design. reflector removes the need for a separate reflector Sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and
Stay visible and safe with this dual-purpose LED strobe and turn signal. The 36-diode light flashes as a bright amber strobe but automatically switches to a turn signal when activated. Works with 12V ... Highlights Dual-Purpose Strobe & Turn Signal: High-visibility amber strobe and a DOT-compliant rear turn signal. Automatic Turn Signal Override: Activating the turn signal cancels the strobe for
Stay visible and safe with this dual-purpose LED strobe and turn signal. The 36-diode light flashes as a bright amber strobe but automatically switches to a turn signal when activated. Works with 12V ... Highlights Dual-Purpose Strobe & Turn Signal: High-visibility amber strobe and a DOT-compliant rear turn signal. Automatic Turn Signal Override: Activating the turn signal cancels the strobe for
5-3/4" x 2-1/8" Rectangle. Low-profile LED light with 6 diodes produces a bright white light. Flood beam illuminates a wide area. Durable aluminum housing and impact-resistant polycarbonate ... Features: Low-profile work light provides bright white light for industrial and agricultural applications Flood beam illuminates a wide area Great for work and utility trucks LEDs are
4-1/2" x 3-3/4" Oval. Low-profile trailer reflector increases visibility of vehicle in low lighting. Durable aluminum housing. Surface mount to trailer - hardware not included.
2-3/4" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
Low profile LED trailer light with 11 diodes serves 8 functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license plate light. Durable plastic housing. Stud mount on 2" centers. 3-Wire design. Built-in reflex reflector removes the need for a separate reflector Sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands
2-7/8" Diameter round. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
2-3/4" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
Filters
