Replacement handle shaft fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Durable, zinc finish resists corrosion. Designed for TJD-12000 Series jacks.Features: Replaces the handle shaft on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity Crank handle attaches to this shaft Designed for TJD-12000 Series jacks Includes
This steel rod lets you easily fine-tune your stabilizer jack's height. Insert the handle into one of the stabilizer's drop leg holes to crank the stabilizer into place.Features: Handle lets you easily fine-tune your stabilizer jack's height Designed for use with TJ01RT and TJ01RT-HD Sturdy steel construction Dimensions: 11-3/4" long x 1/2" diameter
Add a cross shaft to your Bulldog fifth-wheel landing gear (BD500153 or BD1823050383). Allows you to crank only one side to operate both sides of the landing gear in tandem.
Replaces the topwind handle from your etrailer or Ram square, direct-weld jack with a 3K - 7K capacity. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, clear zinc ... Features: Replaces the topwind handle on your etrailer or Ram square, direct-weld jack with a 3,000 - 7,000-lb capacity Fits TJD-5000 and TJD-7000 Series jacks Claw knob allows for comfortable, easy
Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX).Features: Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX)
Trailer Jack
Camper Jacks
Handles and Cranks
etrailer
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
Replacement manual crank handle comes in handy in case of lost power at your campsite or a mechanism failure. Use the crank handle to manually raise and lower fifth-wheel landing gear.Features: Crank handle manually retracts or extends your 5th-wheel landing gear legs in case of power or mechanical failure Can also be used with Lippert electric stabilizer jacks Overall length
With corrosion-resistant zinc plating and 7" retracted height, this drop leg jack is perfect for saltwater marine applications. Has 19" of clearance above your trailer frame. steel construction Sidewind handle Drop leg increases overall extension for maximum adjustability Bolt-on installation can be done in minutes Footplate and mounting bracket included Specs: Application
Load-bearing stabilizers are strong enough to lift your trailer up to 6" while keeping a max bracket height of 25" - perfect for changing a tire. Legs have a combined support capacity of 3,850 lbs. Includes manual hand crank. instructions molded into plastic cap on each leg for easy reference Winding handle (included) makes it easy to deploy the stabilizers Can also be used with impact driver for faster lifting times Also works with
Drop leg, square jack offers superior side-load strength and fits any standard A-frame coupler. Crank included. loading Durable, long-lasting construction Weather-resistant coating on outer tube and zinc inner tube Topwind handle has smooth, ergonomic design for easy cranking Drop leg increases overall extension for
... 15-1/4" screw travel. Foldaway handle included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has a
This super-fast electric A-frame jack has a durable, efficient ball screw and a memory function for easy setup. Offers 18" of travel and 4-1/2" of extension with the drop leg. Extends ... power failure Included adapter allows you to easily use your drill to raise and lower the jack Manual crank handle not included Bolt-on installation Specs: Bracket height: 10-1/2" Retracted - from
Replaces the topwind handle with claw knob from your etrailer or Ram jack. Fits TJA-5000T and TJB, TJP, and TJDP Series jacks.Features: Replaces the topwind handle with claw knob on your etrailer or Ram trailer jack or gooseneck coupler Fits specific model TJA-5000T Fits all Ram TJB, TJP, and TJDP Series jacks Claw knob
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. Topwind handle ... heat Ball bearings roll smoothly through threads of jack screw - no direct, friction-inducing contact Steel construction is durable Zinc finish resists corrosion Topwind handle allows for simple cranking
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low ... Features: Sturdy steel construction provides heavy-duty durability Weather-resistant inner and outer tubes have gray paint finish Drop leg with non-spring return increases overall extension for
Replaces the connecting rod and allows you to operate the lead leg and follow leg of your etrailer or Ram 50,000-lb landing gear set (STLG-5003321, STLG-5003312, TJD2SPDSET-50100) at the same time.Features: Replaces the connecting rod on your etrailer or Ram 50,000-lb, 2-speed landing gear jacks (STLG-5003321, STLG-5003312, TJD2SPDSET-50100)
Replacement handle clip fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks.Features: Replaces the handle clip on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity Designed for TJD-12000 Series jacks (TJD-12000TWSP-F, JD-12000SP-F2, and
Replaces the black handle grip from your etrailer or Ram sidewind jack. Grooved grip allows for comfortable, easy cranking.Features: Replaces the handle grip from your etrailer or Ram sidewind trailer jack Designed for TJA Series, TJB Series, TJP Series, TJDP Series, and TJD Series jacks Grooved, black grip allows for
Add a handle keeper clip to your Bulldog trailer jack to keep your handle out of the way when not in use. Works with all Bulldog square tube trailer jacks. Welds on to the outer tube of your square ... Features: Add a weld-on handle keeper clip to your Bulldog trailer jack to keep your handle out of the way when not in use Works with all Bulldog square tube trailer jacks Welds on to the outer tube
This 27-1/2" long tool limits the distance between you and the T-handles on your JT's Strong Arm stabilizing arms. Tighten or loosen the handles without bending over, kneeling, or crawling ... handle allows for comfortable hand positioning and easy turning Sturdy steel construction Quantity: 1 T-handle tool Length: 27-1/2"
Eliminate that annoying rattle coming from your jackhandle while you drive. The slide-on, molded rubber keeper secures the handle to the jack, eliminating noise and potential damage.Features: Handle keeper creates a secure spacer that holds your jackhandle in place Fits high lift and farm jacks used for offroad or field situations Installation requires you to remove the top
Replaces the handle holdup on your Fulton F2 trailer jack. Fits all Fulton F2 trailer jacks.Features: Replaces the handle holdup on your Fulton F2 trailer jack Fits all Fulton F2 trailer jacks Quantity: 1 handle holdup Fits: Fits all Fulton F2 trailer jacks
This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Surfaces are ... jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your
This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Extends 6" ... designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue
Filters
