Product Experts Available Now!
Call 1-800-940-8924
Result: jack handle extension
Popular Categories
FiltersReplacement Handle Shaft for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs
In Stock
Replacement handle shaft fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Durable, zinc finish resists corrosion. Designed for TJD-12000 Series jacks.Features: Replaces the handle shaft on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity Crank handle attaches to this shaft Designed for TJD-12000 Series jacks Includes hardware Overall dimensions: 12" long x 1" diameter
- Trailer Jack
- Camper Jacks
- Handles and Cranks
- Handle Rod
- etrailer
Square Trailer Jack w/ Handle - Side Pin Drop Leg w/ Spring - 12-1/4" Lift - 10,000 lbs
In Stock
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Easily-to-reach side-facing plunger pin deploys the drop leg Works best for setups where the jack is located behind the A-frame Spring return retracts the drop leg hands-free Drop leg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Heayv-duty internal compotents Durable 1" jack screw allows for heavy lifting Smooth screw travel - a second thrust bearing reduces friction and heat buildup Weather-resistant black painted inner and outer tubes Easy to maintain even in a long life of hard work Grease zerk fittings help keep gears working smoothly Footplate minimizes sinking in soft ground Weld-on installation Includes sidewind handle Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Lift: 12-1/4" Drop leg adjustment: 13-1/2" Total adjustment: 25-3/4" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Diameter mounting hole Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
- 5th Wheel Trailer
- Gooseneck Trailer
- Enclosed Trailer
- Car Hauler
- Side-Mount Jacks
- Manual Jack
- etrailer
- Weld-On
- With Rectangle Foot
- 9001 - 10000 lbs
Square 2-Speed Trailer Jack w/ Handle - Drop Leg - Sidewind - 12-3/8" Lift - 10,000 lbs - Weld
In Stock
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
- 5th Wheel Trailer
- Car Hauler
- Enclosed Trailer
- Gooseneck Trailer
- Side-Mount Jacks
- Manual Jack
- etrailer
- Weld-On
- With Rectangle Foot
- Sidewind Jack
- 9001 - 10000 lbs
Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks - 6" Extension - 1,400 lbs
In Stock
Eliminate the need for blocks or hard-to-position jack foot extensions with this unique, flip-up jack foot. No pins or clips to secure. Foot wedges into place quickly and easily, and it automatically folds up beneath trailer frame when not in use.If the outer tube is less than 10" from the ground, then use a flip-up jack with a 4" extension (FA88-00-4500 - sold separately) instead.
- Trailer Jack
- Camper Jacks
- Jack Foot
- Fastway
- 2-1/4 Inch Diameter Tubing
Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks - 4" Extension - 1,600 lbs
In Stock
Eliminate the need for blocks or hard-to-position jack foot extensions with this unique, flip-up jack foot. No pins or clips to secure. Foot wedges into place quickly and easily, and it automatically folds up beneath trailer frame when not in use.If the outer tube is more than 10" from the ground, then use a flip-up jack with a 6" extension (FA88-00-6500 - sold separately) instead.
- Camper Jacks
- Trailer Jack
- Jack Foot
- Fastway
- 2-1/4 Inch Diameter Tubing
Ultra-Fab T-Slot Power Drill Adapter for Scissor Jacks
In Stock
Designed to work with most scissor jacks, this unique T-slot drill attachment is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. ...
Features: T-slot attachment lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy operation with a powered drill that uses 3/8" drill bits Zinc-plated steel is durable and corrosion resistant Lifetime warranty
Features: T-slot attachment lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy operation with a powered drill that uses 3/8" drill bits Zinc-plated steel is durable and corrosion resistant Lifetime warranty
- Trailer Jack
- Camper Jacks
- Tools
- Ultra-Fab Products
Square 2-Speed Jack - Crank - Front Pin Drop Leg - Spring Return - 10K Lift - 26" Travel
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: Sturdy steel construction provides heavy-duty durability Weather-resistant inner and outer tubes have gray paint finish Drop leg with non-spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Direct-weld design Sidewind crank included Integrated footplate Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Total travel: 26" Screw travel : 12-1/2" Drop leg travel : 13-1/2" Overall height: 28-1/4" Retracted 54-1/4" Extended Outer tube width: 4" Inner tube width: 3-1/2" Limited 1-year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
- 5th Wheel Trailer
- Gooseneck Trailer
- Car Hauler
- Enclosed Trailer
- Side-Mount Jacks
- Manual Jack
- etrailer
- Weld-On
- With Rectangle Foot
- Sidewind Jack
- 9001 - 10000 lbs
Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack
In Stock
Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX). Includes 10 mm socket on end of crank handle.Features: Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX) Includes 10 mm socket on end of crank handle
- Trailer Jack
- Camper Jacks
- Handles and Cranks
- etrailer
Replacement Jack Handle for Ark Xtreme Off-Road Trailer Jack - Sidewind
In Stock
Replaces the sidewind jack handle for your Ark Xtreme off-road trailer jack (ORJW750D or ORJW2SU). Corrosion-resistant zinc finish.Features: Replaces the sidewind jack handle for your Ark Xtreme off-road trailer jack (ORJW750D or ORJW2SU) Removable for safe and convenient storage Corrosion-resistant zinc finish Fits: Ark Xtreme off-road swing-up trailer jack: ORJW750D Ark Xtreme off-road ratcheting trailer jack: ORJW2SU
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- Ark
Replacement Jack Handle for Ark Xtreme Off-Road Trailer Jack
In Stock
Replaces the sidewind jack handle for your Ark Xtreme off-road trailer jack (ORJW350D, ORJW500D, or ORJW1SU). Corrosion-resistant zinc finish.Features: Replaces the sidewind jack handle for your Ark Xtreme off-road trailer jack (ORJW350D, ORJW500D, or ORJW1SU) Removable for safe and convenient storage Corrosion-resistant zinc finish Fits: Ark Xtreme off-road swing-up trailer jack: ORJW350D and ORJW500D Ark Xtreme off-road ratcheting trailer jack: ORJW1SU
- Trailer Jack
- Camper Jacks
- Handles and Cranks
- Ark
Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems - Qty 2
In Stock
Swing-out extension brackets allow you to adjust the location of your HappiJac truck camper jacks to give you additional clearance needed for dually pickup trucks. ...
Features: Swing-out extension brackets allow you to adjust the location of your HappiJac truck camper jacks Works with electric or manual HappiJac camper jack systems (LC736514-4, LC736514-ELKIT, LC736515-4 or LC736515-ELKIT) Includes 2 brackets and installation hardware Made in the USA
Features: Swing-out extension brackets allow you to adjust the location of your HappiJac truck camper jacks Works with electric or manual HappiJac camper jack systems (LC736514-4, LC736514-ELKIT, LC736515-4 or LC736515-ELKIT) Includes 2 brackets and installation hardware Made in the USA
- Camper Jacks
- Trailer Jack
- Hardware
- Brackets
- HappiJac
Roadmaster Quick Foot Assembly Tongue Jack Extender - 6" Extension - 5,000 lbs
In Stock
The Quick Foot makes it fast and easy to raise and lower your tongue jack. Drop it and pin it to gain up to 6" of trailer tongue height. Sturdy steel construction with 7" diameter footplate for stability.Features: Extender lets you quickly raise or lower your tongue jack Fits most standard tongue jacks (manual and electric) with 2" diameter inner tubes Extends 2", 4", or 6" Steel construction with corrosion-resistant zinc plating 7" Diameter footplate provides stability and resists "sinking in" 5,000-lb Tongue rating means extender can be used on any production travel trailer Extender slides up the tongue jack for easy storage Made in the USA Limited lifetime warranty
- Camper Jacks
- Trailer Jack
- Jack Foot
- Roadmaster
Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs - Qty 1
In Stock
... The bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Easy bolt-on installation with included hardware Crank handle sold separately Specs: Height: Collapsed: 4-1/4" Extended: 24" Lift: 24" Collapsed length: 26-3/16" Mounting base dimensions: 10-1/4" long x 3-1/4" wide Large bolt hole dimensions: 11/16" long x 7/16" wide Small bolt hole diameter: 5/16" Load capacity: 5,000 lbs Maximum capacity at 22" extension: 6,500 lbs Quantity: 1 jack 90-Day warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
- RV Motorhome
- Travel Trailer
- Teardrop Camper
- Pop Up Camper
- 5th Wheel Camper
- Scissor Jacks
- Manual Jack
- Lippert
- Bolt-On
- 1 Jack
- Steel
- 4001 - 5000 lbs
etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24" Lift - 30,000 lbs - Qty 4
In Stock
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
- Pop Up Camper
- RV Motorhome
- Travel Trailer
- Teardrop Camper
- 5th Wheel Camper
- Scissor Jacks
- Drill-Powered Jack
- Manual Jack
- etrailer
- Bolt-On
- 4 Jacks
- Steel
- 10001 lbs or More
etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24" Lift - 5,000 lbs - Qty 2
In Stock
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
- Pop Up Camper
- 5th Wheel Camper
- RV Motorhome
- Travel Trailer
- Teardrop Camper
- Scissor Jacks
- Drill-Powered Jack
- Manual Jack
- etrailer
- Bolt-On
- 2 Jacks
- Steel
- 4001 - 5000 lbs
Replacement Sidewind Handle Assembly for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs
In Stock
Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity. Handle arm has a corrosion-resistant, zinc finish. ...
Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity Designed for TJD-7000S Series jacks Durable, zinc-finished handle arm resists corrosion Includes handle, pins, bushings, and gear
Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity Designed for TJD-7000S Series jacks Durable, zinc-finished handle arm resists corrosion Includes handle, pins, bushings, and gear
- Trailer Jack
- Camper Jacks
- Handles and Cranks
- Sidewind
- etrailer
Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4
In Stock
... The bow-tie bases steady the jacks on soft surfaces. Handle included.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 10,000 lbs 2,500 lbs per jack Quantity: 4 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
- RV Motorhome
- 5th Wheel Camper
- Teardrop Camper
- Travel Trailer
- Pop Up Camper
- Scissor Jacks
- Manual Jack
- etrailer
- Bolt-On
- 4 Jacks
- Steel
- 9001 - 10000 lbs
etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24" Lift - 15,000 lbs - Qty 2
In Stock
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 2 jacks Limited lifetime warranty
- 5th Wheel Camper
- Teardrop Camper
- RV Motorhome
- Pop Up Camper
- Travel Trailer
- Scissor Jacks
- Manual Jack
- Drill-Powered Jack
- etrailer
- Bolt-On
- 2 Jacks
- Steel
- 10001 lbs or More
Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 5,000 lbs - Qty 2
In Stock
... The bow-tie base steadies the jack on soft surfaces. Includes handle.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
- Teardrop Camper
- Pop Up Camper
- RV Motorhome
- Travel Trailer
- 5th Wheel Camper
- Scissor Jacks
- Manual Jack
- etrailer
- Bolt-On
- 2 Jacks
- Steel
- 4001 - 5000 lbs
Replacement Sidewind Handle Knob for etrailer and Ram Swivel Marine Jacks
In Stock
Replaces the sidewind handle from your etrailer or Ram swivel marine jack. Grooved handle grip allows for comfortable, easy cranking. Designed for MJ-1000BBX Series jacks.Features: Replaces the sidewind handle from your etrailer or Ram swivel marine jack Designed for use with MJ-1000BBX Series jacks Grooved, black handle grip allows for comfortable, easy cranking Includes bolt and nut for installation
- Trailer Jack
- Camper Jacks
- Handles and Cranks
- Sidewind
- etrailer
Replacement Topwind Knob Handle for Ram Jacks
In Stock
Replaces the topwind handle with claw knob from your etrailer or Ram jack. Fits TJA-5000T and TJB, TJP, and TJDP Series jacks.Features: Replaces the topwind handle with claw knob on your etrailer or Ram trailer jack or gooseneck coupler Fits specific model TJA-5000T Fits all Ram TJB, TJP, and TJDP Series jacks Claw knob allows for comfortable, easy cranking Durable, zinc-finished handle arm resists corrosion Folds in when not in use Note: Color may vary.
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Topwind
- etrailer
Replacement Topwind Handle for etrailer and Ram A-Frame Jacks - 2,000 lbs and 5,000 lbs
In Stock
Replaces the corrosion-resistant, zinc-finished topwind handle from your etrailer or Ram 2,000-lb or 5,000-lb jack. Handle lets you to manually crank the jack. Designed for TJA-2000, TJA-2001, TJA-2002, TJA-2006, and TJA-5000 Series jacks.Features: Replaces the topwind handle on your etrailer or Ram A-frame jack with a 2,000-lb or 5,000-lb capacity Designed for use with TJA-2000, TJA-2001, TJA-2002, TJA-2006, and TJA-5000 Series jacks Bolt head fastener keeps the handle securely on the jack during operation Durable, zinc-finished handle arm resists corrosion
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Topwind
- etrailer
Replacement Sidewind Handle for etrailer and Ram Square, Direct Weld Jacks - 3K - 7K
In Stock
Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 3K- 7K capacity. Handle allows you to manually crank the jack. ...
Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 3,000 - 7,000-lb capacity Designed for TJD-5000S and TJD-7000S Series jacks Durable, zinc-finished handle arm resists corrosion
Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 3,000 - 7,000-lb capacity Designed for TJD-5000S and TJD-7000S Series jacks Durable, zinc-finished handle arm resists corrosion
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- etrailer
Replacement Handle Rod for etrailer and Ram Stabilizer Jacks - 650 lbs
In Stock
This steel rod lets you easily fine-tune your stabilizer jack's height. Insert the handle into one of the stabilizer's drop leg holes to crank the stabilizer into place.Features: Handle lets you easily fine-tune your stabilizer jack's height Designed for use with TJ01RT and TJ01RT-HD Sturdy steel construction Dimensions: 11-3/4" long x 1/2" diameter
- Trailer Jack
- Camper Jacks
- Handles and Cranks
- Handle Rod
- etrailer