Easily pump antifreeze into your RV's water lines during winterization with this handpump. Connect hose to your RV's city water inlet and pump in from antifreeze container. ... Features: Durable handpump lets you pump antifreeze into your RV's plumbing during winterization Lead-free construction won't contaminate your water lines Flexible hose connects pump to your RV's city water inlet Can also pump antifreeze through your RV's indoor faucet with adapter (W1527VP - sold separately) Extension tube lets you reach the bottom of antifreeze containers Specs: Pump dimensions: 12-1/4" long x 1-3/4" diameter Hose length: 36" Extension tube dimensions: 12" long x 3/4" diameter 1-Year warranty
If the manual faucet in your RV no longer primes, replace it with this self-priming faucet. Handpump lets you conserve water and power when camping. Fits a 1-3/4" access hole with a 1/4" FPT fitting. Plumbing hookup not included.Features: Self-priming, manual water faucet with handpump replaces an old or leaking faucet in your RV Pull down on lever to pump water from your fresh-water tank through the faucet Lets you conserve water and power when camping because no electrical pump is needed Chrome plating resists corrosion Requires 1-3/4" access hole with 1/4" FPT female connection Mounting hardware included
Inject antifreeze directly into your RV's waterlines with this handpump. The hose connects to your city water connection or you can purchase a faucet adapter (CAM40083) to pump antifreeze through an indoor faucet.Features: Handpump lets you pump antifreeze directly into your RV's waterlines Flexible hose connects to city water connection Plastic tube reaches to bottom of antifreeze container to avoid waste Faucet adapter (CAM40083) can be purchased separately to pump antifreeze through an indoor faucet 36003 Camco Motor Home Anti-Freeze HandPump with City Water Connection Hose
Install this conversion kit on your RV's water pump to winterize your RV. Let your pump spread antifreeze throughout your water lines - no handpumping required. Permanent conversion kit includes 3-way valve, hose, connector, and thread tape.Features: RV pump converter kit lets you use your water pump to force antifreeze into your RV's water lines Faster and easier than pumping antifreeze by hand 3-Way valve permanently connects to your RV's water pump Close valve to bypass your fresh water tank when adding antifreeze in the fall Open valve to let fresh water flush out antifreeze in the spring Lead-free brass won't contaminate your water lines Durable hose lets your pump draw in antifreeze Female-to-female connector secures valve to your pump Thread tape tightly seals connections Specs: Valve dimensions: 2-1/2" long x 1-1/2" wide x 1-1/2" deep Hose length: 36" Connector dimensions: 1-1/2" long x 1" diameter 1-Year warranty Automatically Pump Antifreeze Into Your RV When winterizing your RV's water lines, pumping in antifreeze by hand can get tiresome quickly.
Still pumping water by hand at the galley? This 12V inline pump drops into the tank and delivers up to 3.17 GPM of powered flow. Its narrow 1-7/16" body fits compact tanks and runs on a 5-amp circuit for steady faucet water.Features to know about Powered Upgrade From Manual PumpsHand or foot pumping gets old fast when you just need running water at the galley. This 12V DC inline pump replaces manual effort with powered flow rated up to 3.17 GPM (12 LPM at 0 m head).
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for up to 2 fixtures. Includes a check valve to prevent backflow.The hose barb fittings have wingnuts to make it easy to turn the fittings by hand. Once you have the tubing (sold separately) in place on the hose barbs, add hose clamps (sold separately) for extra security. Fill your fresh water tank, turn your water faucet on to clear the lines of air, and plug in the Seaflo pump.
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for up to 4 fixtures. Includes a check valve to prevent backflow.To install this, just screw it inline with the inlet port. The fittings on this pump are male NPT ports. Screw the 1/2"-14 NPT hose barbs onto the pump fittings. The hose barb fittings have wingnuts to make it easy to turn the fittings by hand.
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for up to 2 fixtures. Includes a check valve to prevent backflow.To install this, just screw it inline with the inlet port. The fittings on this pump are male NPT ports. Screw the 1/2"-14 NPT hose barbs onto the pump fittings. The hose barb fittings have wingnuts to make it easy to turn the fittings by hand.
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for up to 4 fixtures. Includes a check valve to prevent backflow.To install this, just screw it inline with the inlet port. The fittings on this pump are male NPT ports. Screw the 1/2"-14 NPT hose barbs onto the pump fittings. The hose barb fittings have wingnuts to make it easy to turn the fittings by hand.
A reliable water pump can make a big difference in your RV's plumbing system. This 12V pump restores steady 3 GPM water flow with quiet operation and dry-run protection, so water keeps flowing throughout your RV.Features to know about Restore Reliable Water Flow Replacing a failed water pump is all about getting your fresh water system working again. This 12V pump is designed for quick installation and delivers up to 3 gallons per minute at 45 psi.
A reliable water pump can make a big difference in your RV's plumbing system. This 115V pump restores steady 3.3 GPM water flow with quiet operation and dry-run protection, so water keeps flowing throughout your RV.Features to know about Restore Reliable Water Flow Replacing a failed water pump is all about getting your fresh water system working again. This 115V pump is designed for quick installation and delivers up to 3.3 gallons per minute at 45 psi.
Inconsistent water pressure means interrupted showers, slow sinks, and an RV. This 12V fresh water pump delivers up to 5 GPM at 60 psi with a 5-chamber diaphragm design that supports up to five fixtures and helps reduce pump cycling.Simplify Pump Replacement: Quick-attach fittings and an industry-standard mounting pattern simplify replacement of compatible pumps. Operates Quietly and Safely: Quiet operation reduces pump noise, while ignition protection provides added installation flexibility.
This motorized, self-priming pump creates smooth, consistent flow in your RV's fresh water system. Works as a direct replacement for a 3-gallon-per-minute, 12-volt pump.Features: Compact, motorized pump creates smooth, consistent flow in your RV's fresh water system Can be used as a direct replacement for a 3-gallon-per-minute, 12-volt demand pump Automatically turns on and off when it senses a pressure difference from your faucet Self-priming design Unit is capable of 6' vertical prime and 30' horizontal prime Internal bypass provides low cycling and low noise Durable and flexible feet reduce vibration and noise Built-in check valve prevents backflow Built-in strainer prevents unwanted debris from entering the pump Motor has precision ball bearing for long life Integrated thermal overload protection Can run dry without damage 1/2" Diameter hose fitting at inlet and at outlet Flexible, high-pressure fittings Designed with tapered seal for a watertight connection Mounts in any position 2-Wire connection 15 Amp fuse required Specs: Overall dimensions: 10-1/4" wide x 5-1/4" tall Voltage: 12 volts DC Maximum power draw: 10 amps Flow: 3 gallons per minute (11.3 liters per minute) Pressure setting: 55 psi (3.8 bar) Mounting hole dimensions (center to center): 3-1/4" long x 2-7/8" wide 2-Year warranty
This self-priming, AC-powered water pump delivers steady flow for RV and marine systems. It clears air from the lines, reduces noise and cycling, and protects itself from overheating during extended or changing water demand.Features to know about Self-Priming That Clears Air Without Extra Steps After winterizing or running your tank dry, air can get trapped in your RV plumbing. With a manual pump, clearing that air often means loosening fittings or pouring water directly into the pump. This self-priming pump clears air on its own so water reaches the faucet without manual priming.
Inconsistent water pressure means interrupted showers, slow sinks, in an RV. This pump delivers up to 3.5 GPM at 55 psi with an upgraded pressure switch, built-in strainer, and self-priming design for dependable water flow.Automatically Responds to Water Demand: An upgraded pressure switch cycles the pump on and off as fixtures are used. Helps Protect the Pump: Built-in strainer filters debris before it reaches the pump for dependable operation.
Air in the lines, short cycling, and dry runs can interrupt water use in an RV. This self-priming pump clears air automatically, reduces cycling, and protects itself from heat and low-water situations to keep your water flowing where you need it.Features to know about Self-Priming That Clears Air Without Extra Steps After winterizing or running your tank dry, air can get trapped in your RV's plumbing. With a manual pump, clearing that air usually means loosening fittings or pouring water into the pump, which can be messy. This self-priming pump clears the air on its own so water reaches the faucet without manual priming or repeated cycling.
Motorized, self-priming pump creates a consistent flow of fresh water to your RV or camper. Works as a direct replacement for a 115-volt pump. The quiet pump has a check valve to prevent backflow and a thermal breaker to prevent overheating.Pump should not be used for running a Reverse-Osmosis (RO) Filtration System. Self-Priming Water Pump This motorized pump can be used as a direct replacement for any OEM RV or marine pump and lets you supply a smooth, consistent flow to the fresh water system in your RV, camper, or boat.
Need more water flow from your boat or RV's existing pump? This compact 12V booster installs directly into the water line to increase flow, helping your system keep up when you're using multiple outlets.At just 1-7/16" wide and 5-1/4" long, this pump fits neatly into the water line without needing a separate mounting location. Its lightweight design lets the pipework support the pump itself.
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for up to 2 fixtures. Includes a check valve to prevent backflow.Features: Heavy-duty water pump provides a reliable flow of fresh or salt water in your RV or boat Comfortable water pressure makes your RV feel like home 2-Chamber diaphragm ensures high-volume water flow for up to 2 fixtures Durable, abrasion- and corrosion-resistant santoprene construction Self-priming unit removes air from pipeline, preventing delays and water spitting out of the faucet Unit can be hidden from view because it doesn't require manual priming Internal check valve prevents backflow contamination of your clean water supply Automatic start-and-stop pressure switch helps prevent damage to the pump Shuts the unit off if it becomes overloaded and starts to overheat Turns the unit back on once core temperature reaches a tolerable level Made for intermittent duty, but can run dry during priming without damage to the unit Quiet operation - comparable to an indoor electric fan Semi-rigid rubber base minimizes vibrations and is tear and corrosion resistant Durable, energy-efficient, copper-core motor generates minimal heat Enclosed housing and sealed switches prevent damage caused by moisture Included filter prevents debris from entering and damaging the unit Simple installation Connects to standard NPT connections - includes hose barb fittings for 1/2" hoses too Mounts in any position using bolts (hardware not included) Can be mounted in a location higher than the water tank Compatible with 12V DC systems Specs: Overall dimensions: 7-3/8" long x 3-7/8" wide x 2-3/8" tall Mounting hole pattern (center to center): 2-1/4" long x 3-1/8" wide Ports: Inlet 3/8"-14 male PT Outlet: 3/8"-14 male NPT Maximum power draw: 5.04 amps Flow: 1.3 gallons per minute (GPM) Maximum pressure: 100 psi Maximum water temperature: 140 F 2-Year limited warranty
Easily empty your black water tank, fish box, or livewell with this self-priming macerator pump. 4-Blade chopper reduces risk of clogs. Pushes waste through hose (not included) for cleaner dumping.Features: Macerator pump lets you easily empty your black water tank, fish box, or livewell Helps prevent smells in your boat's bilge Makes dumping your RV's tank faster and more efficient Stainless steel, 4-blade chopper reduces risk of clogging by grinding waste before pumping overboard Perfect for fish scales and residual gunk Cannot handle rags, feminine products, or hard objects Thermally protected sensor allows the pump to run dry long enough to self-prime Prevents overheating during priming and allows time to determine when the black water tank is empty Capable of 5' lift when wet and 4' lift when dry Does not require a trestle system for gravity drainage Helps keep black water drainage tube clean by pushing waste through Flexible rubber impeller is durable and helps create a pulseless flow Anti-clogging mechanism lets you remove clogs without having to disconnect hoses Rear cover plate removes, revealing a shaft that can be turned with a screwdriver Manual function lets you use pump even if you lose power Quiet operation - rubber feet help prevent vibration Durable, powder coated housing and triple-sealed motor are corrosion resistant Compatible with 12V DC systems Easy, bolt-on installation Mount near the tank for optimum performance Specs: Overall dimensions: 11-3/16" long x 5" wide x 3-7/8" tall Base dimensions: 3-1/8" long x 4-11/16" wide Mounting dimensions: 2-5/16" long x 3-3/4" wide Maximum power draw: 12 amps Flow: 12 gallons per minute (GPM) Ports: Inlet: 1-1/2" male NPT and 1-1/2" hose barb Outlet: 1" hose barb 4-Year limited warranty
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for 1 fixture. Includes a check valve to prevent backflow.If you turn your water on and realize you've unknowingly run your fresh water tank dry, the pump can run dry without damage while you shut the faucet and the pump off. The pressure switch also protects the pump motor from overheating when the water has been on for a while.
Conserve battery power and help your pump last longer. This accumulator tank reduces cycling of your pump system, making it quieter by allowing the pump to reach shut-off pressure more smoothly. ... Features: Helps produce a smooth, controlled, uninterrupted flow of water in your RV Pushes water through pipes before initiating the pump Allows enough water flow to let you flush at night without waking others in the RV Decreases battery drain by reducing on/off pulsing cycle Reduces noise by allowing your pump to reach shut-off pressure more smoothly Semi-rigid rubber feet also reduce noise caused by vibration Made with a maintenance-free internal rubber membrane Mounts downstream from your pump Compact enough to fit in small spaces Connects to standard NPT connections Includes hose barb fittings for 1/2" hoses Specs: Overall dimensions: 7-7/8" long x 5" wide x 4-1/2" tall Mounting hole spacing (center to center): 4-1/8" Capacity: 0.75 liter Maximum pressure: 125 psi Pressure pre-charge: 10 psi Flow: 125 gallons per minute (GPM) Ports: Inlet: 1/2" male NPT Outlet: 1/2" male NPT Weight: 1 lbs
Make filling your fresh water tank or diesel generator easy with this inline booster pump. Can be used to empty bad gas from your tank. Easily clamps onto your 12V battery. Offers up to 20 minutes of runtime.You can submerge the pump in your fresh water tank so it will function as a gravity-fed pump. Or you can install this pump above the tank for use as an inline pump, which will require an inlet hose placed inside the tank.
Filters
