Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.When mounted in the front, the load bar on the GoalPost extends farther out from your roof rack crossbars than when the support is mounted in the rear. As a result, you can safely balance long loads with ease.
Adjustable load extender lets you haul extra-long loads at truck bed or cab height. Extension has 11 levels of adjustment to match the height of your cab. 60" crossbar with integrated tie down points. Includes anchor straps.Simply slide the shank into your 2" hitch receiver, insert the threaded hitch pin, and tighten it down with the included wrench. This not only secures the rack to your vehicle, but also reduces noise and movement while the extender is installed. For added security you can add a hitchlock (Y07235 - sold separately) to lock the LongArm to your vehicle's hitch receiver.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. Topwind handle allows for an additional 15-1/2" of screw travel.Instead, just remove the clip from the quick-release pin and grab the built-in, easy-to-grip handle. With a firm grip on the jack post, pull on the pin handle and then rotate it 180 degrees. Lower the post to the desired position and rotate the pin handle back to lock the outer tube in place.
Perfect for marine and other off-the-beaten-path applications, this rugged-looking square swivel jack has an articulating footplate that helps it get a grip on uneven surfaces. Black powder coat and zinc fight rust and corrosion. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly Pull-pin lets you position jack quickly Protective cover houses the pull-pin and swivel components Offers stability on uneven surfaces with fully articulating footplate Far more stability than either a caster wheel or a traditional footplate Resists rust and corrosion, inside and out Top layer is a matte black powder coat finish to protect from corrosion and harsh UV rays Base layer is a premium TUFFPLATE zinc finish with a 500-hour salt spray rating Drain holes at bottom of inner post prevent water buildup Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Complements your rugged trailer with an edgy, off-road look of its own Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,000 lbs Bracket height (from bottom of footplate to top hole of bracket): Retracted: 16-5/8" Retracted Extended: 28-5/8" Extended Screw travel : 12" Pull pin diameter: 1/2" Tube diameter: 2-1/2" Handle radius: 6-1/8" 3-Year limited warranty Swivels Smoothly and Easily There really isn't much to the pull-pin on a typical swivel jack.
The extra-wide caster wheel offers great surface contact when rolling ofer gravel or soft ground, and turns 360 degrees for easy maneuverability. Black powder coat and zinc provide rust protection, which is great for boat trailers. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly Pull-pin handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Extra-wide caster wheel turns a full 360 degrees Resists rust and corrosion, inside and out Top layer is a matte black powder coat finish to protect from corrosion and harsh UV rays Base layer is a premium TUFFPLATE zinc finish with a 500-hour salt spray rating Drain holes at bottom of inner post prevent water buildup Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Complements your rugged trailer with an edgy, off-road look of its own Bolts around your trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 16-5/8" Extended: 28-5/8" Screw travel : 12" Overall length: Retracted: 29" Extended: 41-1/2" Wheel dimensions: 8" diameter x 3-5/16" wide Pull pin diameter: 1/2" Outer tube diameter: 2-1/4" Handle radius: 6-1/8" 3-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
Perfect for heavy-duty marine and other off-the-beaten-path trailer applications, this rugged-looking swivel jack has an extra-wide wheel for great stability and turns 360 degrees to make it easy to maneuver your trailer. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly Pull-pin handle lets you position jack quickly Protective handle cover houses the pull-pin and swivel components Makes it easy to move your trailer in tight spaces Extra-wide caster wheel turns a full 360 degrees Resists rust and corrosion, inside and out Outer tubing has a matte black powder coat to protect from corrosion and harsh UV rays Inner tubing has a premium TUFFPLATE zinc finish with a 500-hour salt spray rating Drain holes at bottom of inner post prevent water buildup Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Complements your rugged trailer with an edgy, off-road look of its own Bolts around your trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailers frames up to 3" tall x 4" wide Lift capacity: 1,700 lbs Bracket height (from bottom of wheel to top hole of bracket): Retracted: 16-5/8" Extended: 28-5/8" Screw travel : 12" Pull pin diameter: 1/2" Outer tube diameter: 2-1/2" Handle radius: 6-1/8" Wheel dimensions: 8" diameter x 3-5/16" wide 3-Year limited warranty Protective Cover to House the Pull-Pin and Swivel Components There really isn't much to pull-pin on a typical swivel jack.
This trailer jack block makes leveling and stabilizing your RV or trailer simple. No more wrestling with wobbly jacks or stacking sketchy wood blocks. It's lightweight, sturdy, and takes the hassle out of setting up your campsite.Features: Magnets That Stick: Integrated magnets allow the block to instantly attach to your jack, so no fumbling around trying to keep it in place Stackable for More Height: For additional height, you can stack 2 blocks together Recessed Post Hole: Each block features a 2-1/2" recessed post hole, making it compatible with jacks both with and without footplates. Made in the USA: Proudly manufactured in the United States Specs: Dimensions: 8" tall Top diameter: 10" (9-1/8" recessed area) Base diameter: 12" Stacked height of 2 blocks: 14" tall Weight: 5.3 lbs Weight capacity: 6,000 lbs (1,500 lbs when 2 blocks are stacked) Lifetime warranty (magnets and screws excluded from coverage)
This trailer jack block makes leveling and stabilizing your RV or trailer simple. No more wrestling with wobbly jacks or stacking sketchy wood blocks. It's lightweight, sturdy, and takes the hassle out of setting up your campsite.Features: Magnets That Stick: Integrated magnets allow the block to instantly attach to your jack, so no fumbling around trying to keep it in place Stackable for More Height: For additional height, you can stack 2 blocks together Recessed Post Hole: Each block features a 2-1/2" recessed post hole, making it compatible with jacks both with and without footplates. Made in the USA: Proudly manufactured in the United States Specs: Dimensions: 4" tall Top diameter: 10" (9-1/8" recessed area) Base diameter: 12" Weight: 5.3 lbs Weight capacity: 6,000 lbs (1,500 lbs when 2 blocks are stacked) Lifetime warranty (magnets and screws excluded from coverage)
This boat trailer jack has a black powder coat finish on the outside and a premium, 500-hour salt spray rated zinc finish on the inside for full rust protection. Caster swivels 360 degrees to make it easy to maneuver your trailer. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, inside and out Outer tubing has a matte black powder coat finish to protect from corrosion and harsh UV rays Inner tubing has a premium TUFFPLATE zinc finish with a 500-hour salt spray rating Drain holes at bottom of inner post prevent water buildup Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle has a comfortable, cushioned, ergonomic grip Spoked wheel design adds a little stylish flair Incorporates grease zerks to make routine maintenance easy Creates a stylish flair with spoked wheel design Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 1,500 lbs Bracket height Retracted: 16-5/8" Extended: 28-5/8" Screw travel : 12" Pull pin diameter: 1/2" Outer tube diameter: 2-1/4" Handle radius: 6-1/8" Wheel dimensions: 8" diameter x 2-1/4" wide 3-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. Clear zinc finish resists rust.Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames up to 5" tall x 3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mounting bracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Offers twice the stability of single-wheel jacks Wheelbase turns a full 360 degrees Swings up and down smoothly J-bolt handle lets you position jack quickly Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames 2" to 4" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 12-5/8" Extended: 23" Screw travel : 10-3/8" Handle radius: 6-1/2" Inner tube diameter: 2" Outer tube diameter: 2-1/4" Dual-wheel dimensions: 5-3/4" diameter x 4" wide 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames 2" to 4" tall Lift capacity: 1,000 lbs Bracket height: Retracted: 13-1/2" Extended: 23-1/2" Screw travel : 10" Outer tube diameter: 2" Inner tube diameter: 1-3/4" Wheel dimensions: 5-3/4" diameter x 2" wide Handle radius: 7" 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Creates a stylish flair with the spoked wheel Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailers frames 2" to 4" tall Lift capacity: 1,200 lbs Bracket height: Retracted: 12-1/2" Extended: 23-1/2" Screw travel : 11" Inner tube diameter: 1-3/4" Outer tube diameter: 2" Handle radius: 6-5/8" Wheel dimensions: 5-3/4" diameter x 2" wide 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
A-frame trailer jack is ideal for boat trailers and recreational trailers. 6" Caster can be swapped for a foot plate (sold separately) for more stability. Rust-resistant premium finish is 5 times stronger than traditional zinc. Made in the USA.Features: Supports, lifts, and lowers your A-frame boat or recreational trailer Lets you easily remove the caster wheel Allows for extra ground clearance while towing Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle has a comfortable, cushioned grip Slots into the existing hole in your A-frame coupler Includes hardware for bolt-on installation Made in the USA Specs: Lift capacity: 1,000 lbs Bracket height: Retracted: 8-1/2" Extended: 23-1/2" Screw travel : 15" Clearance: 16-1/2" from top of trailer frame to top of jack Inner tube diameter: 1-3/4" Outer tube diameter: 2" Wheel dimensions: 6" diameter x 3-5/16" wide 2-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Creates a stylish flair with the spoked wheel Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailers frames 2" to 4" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 13" Extended: 23" Screw travel : 11" Inner tube diameter: 2" Outer tube diameter: 2-1/4" Handle radius: 6-1/4" Wheel dimensions: 7-5/8" diameter x 2-1/16" wide 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Swing-up boat trailer jack is perfect for your small Jon boat or jet ski trailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. Rust-resistant premium finish is 5 times stronger than traditional zinc. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without getting your hand smashed Creates a stylish flair with the spoked wheel Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 13" Extended: 23" Screw travel : 10" Bracket dimensions: 5-1/2" wide x 6-3/4" tall Clearance: 13" from mounting bracket to top of jack Inner tube diameter: 2" Outer tube diameter: 2-1/4" Wheel dimensions: 8" diameter x 2" wide 3-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
Swing-up boat trailer jack is perfect for your small Jon boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Rust-resistant premium finish is 5 times stronger than traditional zinc. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 1,000 lbs Bracket height: Retracted: 15-5/8" Extended: 27-5/16" Screw travel : 12" Inner tube diameter: 1-3/4" Outer tube diameter: 2" Wheel dimensions: 6" diameter x 2" wide 3-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
With twice the lift of other jacks in its class, this one is ideal for trailers that sit high off the ground. Footplate stabilizes better than a caster wheel. Marine-grade, zinc finish is perfect for boat trailers. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 8-3/16" Extended: 38-3/16" Total lift: 30" Screw travel : 15" Drop leg travel : 15" Adjustment hole spacing on drop leg: 4-7/16" center on center Clearance: 17" from mounting bracket to top of jack Handle swing radius: 6-1/8" Inner tube diameter: 2" Outer tube diameter: 2-1/4" 2-Year limited warranty Designed for Trailers that Sit High Off the Ground Unlike most boat trailer jacks out there, this Dutton-Lainson jack has a drop leg that will make using it faster.
This jack's footplate is more stable than that caster wheel and block you're using. Premium zinc finish has a 500-hour salt spray rating - great for trailers near saltwater. Total lift includes a 13-1/2" drop leg. Made in the USA.Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting hardware Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 10-1/4" Extended: 25-1/4" Total lift: 28-1/2" Screw travel : 15" Drop leg travel : 13-1/2" Overall height (when retracted): 25-1/4" Footplate dimensions: 7" long x 4" wide 1-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
Swing-up boat trailer jack is perfect for your small Jon boat or jet ski trailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. Rust-resistant premium finish is 5 times stronger than traditional zinc. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Creates a stylish flair with the spoked wheel Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 1,000 lbs Screw travel : 10" Bracket height (from top of mounting bracket to bottom of wheel): Retracted: 15-1/2" Extended: 25-9/16" Clearance: 10" from mounting bracket to top of jack Inner tube diameter: 1-3/4" Outer tube diameter: 2" Wheel dimensions: 8" diameter x 2" wide 2-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
This might be just what you need if you have clearance issues along your trailer frame that won't let you swing a jack up. Wheel swivels 360 degrees. Premium zinc finish with a 500-hour salt spray rating is ideal for boat trailers. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Capacity: 1,000 lbs Bracket height: Retracted: 10" Extended: 25" Screw travel : 15" Inner tube diameter: 1-3/4" Outer tube diameter: 2" Wheel diameter: 6" 3-Year limited warranty Built for Setups that Make a Swivel Jack Impractical to Use Most boat trailer jacks are designed so that you can stow them parallel to your tongue when you're towing.
Carry bigger, longer loads with this hitch-mounted load support. The adjustable-height system includes a 49" long, Vortex Aero crossbar; a tilting mast for easy loading; and a tie-down for transporting a ladder or kayak.This adjustable-height crossbar system provides the lateral support you need to safely carry long gear such as a ladder or kayak on your roof rack. The T-Load includes a 49-inch-long, Vortex Aero crossbar that sits parallel to your roof-rack crossbars. The aluminum crossbar is mounted on an anti-swivel plate to ensure stability.
... Remove the receiver for a fully concealed look when you're not carrying your bikes to the trail. Only for use with hitch-mounted racks and carriers.Or you can install a hitch on your ride and use a hitch-mounted bike rack to carry your bikes. This rack receiver is designed to act as a mounting point for your hitch bike rack or cargo carrier. Just slide the shank of your carrier into the receiver for use, and when you're done you can not only remove the carrier, but the receiver as well, leaving your vehicle looking clean and unmodified.
... Remove the receiver for a fully concealed look when you're not carrying your bikes to the trail. Only for use with hitch-mounted racks and carriers.Or you can install a hitch on your ride and use a hitch-mounted bike rack to carry your bikes. This rack receiver is designed to act as a mounting point for your hitch bike rack or cargo carrier. Just slide the shank of your carrier into the receiver for use, and when you're done you can not only remove the carrier, but the receiver as well, leaving your vehicle looking clean and unmodified.
Filters
